Table of Contents
Advertisement
10. Carefully pivot the failing system board upward to remove it out of the chassis.
Figure 207. Removing the system board
11. Remove the microprocessor from the failing system board and install it on the new system board. See
"Replacing the microprocessor" on page 229.
12. Install the new system board into the chassis by aligning the five screw holes in the new system board
with the corresponding mounting studs on the chassis. Then, install the five screws from screw
screw
1
in sequence to secure the system board.
Figure 208. Installing the five screws to secure the system board
13. Reinstall the thermal module. See "Replacing the thermal module" on page 227.
.
Chapter 11
Replacing FRUs (machine types: 10AX, 10AY, 10DK, 10DL, 10DM, and 10DN)
5
to
233
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
