Table of Contents
Advertisement
Fitting the spacer bars
Use the middle screw holes if one of the
following SmartLine elements is in-
stalled to the right or left of the spacer
bar: CS 7611, CS 7101, CS 7102
Wooden worktops
Position the spacer bars flush onto
the upper edge of the cut-out or onto
the lower step of the stepped cut-out.
Secure the spacer bars with the
3.5 x 25 mm wood screws supplied.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Natural stone worktops
You will need heavy-duty double-side
tape (not supplied) to secure the
spacer bars.
Stick the tape onto the upper edge of
the cut-out or onto the lower step of
the stepped cut-out.
Position the spacer bars flush onto
the upper edge of the cut-out or onto
the lower step of the stepped cut-out.
Press the spacer bars firmly into
place.
Installation
43
Advertisement
Table of Contents
