– Fitting the soft-close mechanism
Insert the soft-close mechanism
on the door hinge side (at an angle
initially) so that it clicks into position.
Then press the other end of the soft-
close mechanism into the opening.
Secure the soft-close mechanism
with the screw .
Push the hinged arm into the
opening on the door hinge.
Insert the pin into the door hinge
from above. Turn this with a
screwdriver (by approx. ¼ turn) until
both lugs on the pin click into
position correctly in the grooves.
Pull out the red safety device .
Tip: Keep the red safety device in case
you want to change the door hinging
again at a later date.
Fit the cover on the door hinge.
Fit the panel so that it clicks into
position.
1
Push on the outer cover .
Close the appliance door.
Installation
91