Ventilation; Furniture Door Panel; Gap - Miele K 31222 Ui Operating And Installation Instructions
Hide thumbs
Also See for K 31222 Ui:
- Operating and installation instructions (76 pages) ,
- Manual (11 pages) ,
- Operating and installation instructions (72 pages)
Table of Contents
Advertisement
Installation
Ventilation
If the ventilation gaps given are
not observed, the compressor will
run more frequently and for longer
periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
It is essential to observe the ventila-
tion gaps given (see "Building-in di-
mensions").
Ventilation takes place through a vent-
ilation grille in the appliance plinth.
The air inlet and outlet must not be
covered or blocked in any way. They
must also be regularly cleaned of
dust.
46
Furniture door panel
Gap
Depending on the style of kitchen fur-
niture, the thickness and edge radius of
the furniture door and the gap that runs
around the door, vertically and horizont-
ally, are specified.
It is essential to pay attention to the fol-
lowing!
If the gap between the appliance fur-
niture door and the adjoining housing
unit door or wall on the hinged side
is too small, the appliance door
could collide with the adjoining hous-
ing unit door or wall when opened.
It may be necessary to adjust the
size of this gap to suit the thickness
and edge radius of the appliance fur-
niture door.
This must be taken into consideration
when planning your kitchen and when
replacing an old appliance with a new
one to ensure the installation conditions
required are met.
Advertisement
Table of Contents
