Table of Contents
Advertisement
Message
lights up yellow in
the display and an
alarm also sounds.
lights up red in the
display, a fault code F
with numbers appears
and an alarm also
sounds.
Cause and remedy
The door alarm has been activated (also see "Door
alarm").
Touch
in the display.
The alarm message is confirmed and the warning
tone stops.
The current temperature will appear in the display
again.
Close the appliance door.
The alarm will stop.
There is a fault.
To switch the alarm off touch in the display.
Contact Miele.
To report the fault you need the fault code and also
the model number and serial number of your appli-
ance. You can access these in the display.
To do this touch in the display.
The appliance data required will be shown in the dis-
play.
Confirm with
OK
the fault code will be shown again in the display.
The appliance can be switched off directly from the
fault code display.
Touch .
There is an appliance fault: this display always has
priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
Problem solving guide
to exit the information display and
57
Advertisement
Table of Contents
