Advertisement
Changing over the lower hinge plate
Pull the hinge pin complete with
washer and adjusting foot
upwards to remove.
Remove the stopper .
Undo the screws and remove the
hinge plate .
Slightly loosen the screw of the door
closing aid on the hinge plate .
Place the door closing aid in the
opposite mounting hole in the hinge
plate and then tighten the screw.
Insert the stopper into the other
hole.
Remove the cover .
Remove the screw and screw it
into the outside hole on the opposite
side.
11210610-01
Turn the cover 180° and refit it in
the holes on the opposite side.
Screw the hinge plate securely into
position on the new hinge side with
the screws .
Reinsert the hinge pin complete
with washer and adjustable
foot . Important: The lug on the
hinge pin must point to the back
again.
Place the door onto the hinge pin
from above.
Close the appliance door.
Installation
Advertisement
