Cleaning and care
The data plate located inside the
interior cabinet of the refrigeration
appliance must not be removed. It
contains information which is required
in the event of a fault.
Do not let water get into the
electronic unit or the lighting.
Risk of damage due to moisture
ingress.
The steam from a steam cleaner can
damage plastic and electrical
components.
Do not use a steam cleaner to clean
the refrigeration appliance.
Cleaning water must not get into the
drain hole.
Cleaning agents
Cleaning and conditioning agents
used in the interior cabinet of the
refrigeration appliance must be food
safe.
To avoid damaging the surfaces of the
appliance, do not use the following:
- Cleaning agents containing soda,
ammonia, acids or chlorides
- Cleaning agents containing descaling
agents
- Abrasive cleaning agents (e.g.
scouring powder, scouring liquid or
pumice stones)
- Cleaning agents containing solvents
- Stainless steel cleaners
- Dishwasher cleaners
- Oven sprays
- Cleaning agents for ceramic hobs
(except to clean the glass front)
66
- Glass-cleaning agents (except to
clean the glass front: for this a glass-
cleaning agent containing a little
alcohol, but no citric or similar
additives, may be used)
- Hard, abrasive sponges and brushes
(e.g. pot scourers)
- Eraser stain remover blocks
- Sharp metal scrapers
We recommend using a clean sponge
and lukewarm water with a little
washing-up liquid to clean the surfaces
of the appliance.
Preparing the refrigeration
appliance for cleaning
Cleaning the refrigerator section only:
Switch Cleaning mode on. The
cooling system in the refrigerator
section is switched off, but the interior
lighting remains switched on.
Tap .
Swipe left or right until is shown in
the middle.
Tap .
To leave this Settings level, tap .
If Cleaning mode is switched on,
this will be indicated on the start
display.
Take any food out of the refrigerator
section and store it in a cool place.
Take out any removable accessories
for cleaning (see "Removing,
dismantling and cleaning
accessories").