Miele KWT 2662 ViS Operating And Installation Instructions page 17
Wine conditioning unit
Hide thumbs
Also See for KWT 2662 ViS:
- Operating and installation instructions (104 pages) ,
- Operating and installation instructions (100 pages)
Table of Contents
Advertisement
. . . with partition wall
The wall a between the side-by-side
wine conditioning units/refrigeration
appliances must be at least 16 mm
thick.
If the door hinges of the appliances
are next to each other, you must take
into account the thickness of the
furniture fronts and door handles so
that the appliance doors do not
collide and become damaged if they
are opened at the same time.
The wine conditioning units/
refrigeration appliances are secured
individually in their building-in niche
using the supplied installation material.
If the partition wall a is narrower than
160 mm, you will need the side panel
heater from the side-by-side installation
kit to prevent condensation from
forming and any resulting damage.
When planning building-in niches,
please note that the niche into which
the appliance with the side panel
heater is installed must be 4 mm
wider (see "Installation – Installation
dimensions").
If the partition wall a is thicker than
160 mm, you do not need the side-by-
side installation kit or the side panel
heater.
. . . without partition wall
If the wine conditioning units/
refrigeration appliances are to be
installed next to each other without a
partition wall between them, they will
need to be joined together with the
side-by-side installation kit. In addition,
you must install the side panel heater to
prevent condensation from forming and
any resulting damage.
Installation
17
Advertisement
Table of Contents
