Advertisement
f Optical interface
This is used by the Service depart-
ment as a transmission point.
g Sensors for extra options
You can supplement wash pro-
grammes with extra options.
If a wash programme has been se-
lected, the sensor controls for the
possible Extras light up dimly.
h sensor control
You can view information about the
energy and water consumption of
your washing machine with the
sensor.
See "Washing environmentally and
economically, Eco Feedback" for
more information.
The following information will appear
in the display:
– An estimate of the energy and wa-
ter consumption before the pro-
gramme begins.
– The actual energy and water con-
sumption and the cost during the
programme or at the end of the
programme.
i sensor
The sensor starts the delay start
function. With Delay start you can
delay the start of the programme.
The start of the programme can be
delayed from 15 minutes up to a
maximum of 24 hours. This allows
you to make use of night-time eco-
nomy electricity rates, for example.
Please see "Delay start" for more in-
formation.
Operating the washing machine
j Start/Stop sensor
Touching the Start/Stop sensor
starts the selected programme or
cancels a programme that has
already been started. The sensor
flashes slowly as soon as it is pos-
sible for a programme to be started
and then lights up constantly after
the programme has started.
k sensor
This sensor is used for activating
Cap dispensing.
l Programme selector
This is used for selecting pro-
grammes and for switching off. The
washing machine is switched on
when you select a programme, and
switched off by turning the pro-
gramme selector to the position.
15
Advertisement
