Advertisement
Interim spin
There is a spin cycle after the main
wash and between the rinses. A reduc-
tion in the final spin speed will also re-
duce the interim spin speed as appro-
priate.
Omitting the final spin (Rinse
hold)
If Rinse hold is selected, the laundry re-
mains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be re-
moved from the drum immediately after
the end of the programme.
Set the spin speed
To start the final spin
The washing machine will display the
maximum spin speed possible. You can
reduce the spin speed.
Touch the Start/Stop sensor.
To end the wash programme
Select this option if you want to remove
the laundry when it is dripping wet and
without spinning.
Reduce the spin speed to
Touch the Start/Stop sensor.
The water will be pumped away.
.
.
0
Omitting the interim spin and
the final spin
Before the start of the wash pro-
gramme, reduce the spin speed to
Touch the Start/Stop sensor.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Spinning
0
.
37
Advertisement
