Closing The Pc; Replacing The Pc Cover; After Closing The Pc - HP Pavilion Slimline s7200 - Desktop PC Manual
Upgrading and servicing guide
Hide thumbs
Also See for Pavilion Slimline s7200 - Desktop PC:
- Getting started manual (1 page) ,
- Support manual (17 pages) ,
- Brochure (16 pages)
Table of Contents
Advertisement
Closing the PC
Replacing the PC Cover
1 Place all cables inside of the PC case.
2 Place the cover onto the PC (A) about 2.5 cm (1 inch)
back. Make sure the slots in the PC case align with the
cover tabs.
3 Slide the cover forward on the frame until it locks into
place (B). Make sure the bottom of the cover lines up with
the PC case.
4 Align the screws on the PC cover with the holes on the
back of the PC frame. Insert and then tighten the screws
on the cover (C).
5 Complete the procedure "After Closing the PC" on
page 5.
After Closing the PC
To avoid injury and equipment damage, always follow this procedure in this order after closing the PC:
WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug
telecommunications or telephone connectors into the Ethernet network interface connector.
1 Reconnect the modem/telephone cable and all other attached cables, such as the keyboard, mouse, Ethernet,
and monitor cables.
2 Reconnect external devices, such as a printer.
3 Reconnect the power cord.
4 Turn on the PC and all peripherals, such as the monitor.
Upgrading and Servicing Guide
5
Hide quick links:
Advertisement
Table of Contents
