3. Technical brief 3.1.11 Bluetooth Interface GD580 supports Bluetooth operation using ST’s STLC2593C Bluetooth module. A. General Description The Bluetooth interface utilizes the SPI interface for control signals going to and from the Bluetooth module. The SPI is also used for data transmissions.
3. Technical brief 3.1.12 MicroSD Interface card GD580 supports the MicroSD card interface as external memory card. MicroSD card has 4-data line, so GD580 uses 4-data lines. All control and data lines are connected to DB3150. Cause of the difference between DB3150 and MicroSD card, a level shifter should be added.
This section provides a description of the Video Telephony functions. Figure 3-3-8. Video Telephony Scheme Video Telephony Mode has same paths with Loud Speaker Mode. 3.3.8 Audio Main Component There are 4 components in GD580 schematic Diagram. Part Number marked on GD580 Schematic Diagram. ITEM PART NUMBER...
3. Technical brief 3.5.1 Fuel Gauge AB3000 supports the measurement of the current consumption/charging current in the GD580 with a fuel gauge block. By constantly integrating the current flowing into and out of the battery, the fuel gauge block is used to determine the remaining battery capacity.
RF blocks can be divided into three main parts, which are a WCDMA part, a GSM, and a RF front-end. Different from other general solutions, the RF front-end of GD580 consists of an antenna switch and an EDGE power amplifier module (PAM).
10. Calibration 10. Calibration 10.1 General Description This document describes the installation and software usage for the calibration of LG’s GSM/GPRS/EDGE/WCDMA Multimedia Mobile Phone. The calibration menu and it’s result is displayed in PC terminal by Mobile phone. 10.2 XCALMON Environment 10.2.1 H/W Environment...