Table of Contents
Advertisement
Speakers
Description
Speakers (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Keyboard (see
●
Top cover (see
●
WLAN module (see
●
Hard drive (see
●
System board (see
To remove the speakers:
1.
Remove the four Phillips broadhead PM2.0×2.0 screws (1) that secure the speakers to the computer.
2.
Lift the speakers from the base enclosure (2).
NOTE:
gaskets are installed correctly.
Battery on page
Keyboard on page
Top cover on page
WLAN module on page
Hard drive on page
System board on page
Note the rubber gaskets (3) around each screw. When installing the speakers, make sure the
35), and then remove the following components:
39)
47)
55)
53)
60)
Spare part number
749653-001
Component replacement procedures
65
Hide quick links:
Advertisement
Table of Contents
