en - Warning and Safety instructions This robot vacuum cleaner complies with statutory safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the robot vacuum cleaner, please read these instructions carefully before using it for the first time.
Page 32
Miele authorised service technician. Otherwise the guarantee will be invalidated. Repairs should only be carried out by a Miele authorised service technician. Repairs and other work by unqualified persons can cause considerable danger to users.
Page 33
en - Warning and Safety instructions Switch the robot vacuum cleaner off with the OFF switch on the side before cleaning / maintaining it. Also switch it off in this way if it is operating unusually. Only use the parts supplied (mains cable, power supply unit and base station) to charge the rechargeable battery.
Page 34
Only use genuine accessories with the "Original Miele" logo on them. Otherwise the manufacturer cannot guarantee the safety of the product. Miele cannot be held liable for damage caused by incorrect use or operation or by non-compliance with these Warning and Safety instructions.
en - Caring for the environment Disposal of packing material Disposing of your old appliance The packaging is designed to protect Electrical and electronic appliances the robot vacuum cleaner from damage often contain valuable materials. They during transportation. The packaging also contain materials which, if handled materials used are selected from or disposed of incorrectly, could be...
en - Guide to the appliance The three illustrations for the "Guide to the appliance" section are on the pull-out pages in the back of these operating instructions. 1. Robot vacuum cleaner and base station Top of the robot vacuum cleaner a Camera b Display c Sensors (collision protection)
Page 37
en - Guide to the appliance d Charging contacts e Cleaning brush storage compartment f Contact indicator 2. Remote control a Start / Pause button (~ II) b Timer button c Spot vacuuming mode button d Corner vacuuming mode button e Base button f OK confirmation button with direction buttons around it g Turbo vacuuming mode button...
Functions and features of the Preparing for use robot vacuum cleaner Diagrams a - m for the "Preparing The robot vacuum cleaner is suitable for use" section are at the end of for the daily cleaning of short pile these operating instructions. carpets, fitted carpets and hard flooring.
^ Connect the robot vacuum cleaner to After approx. 60 seconds the robot vacuum cleaner will switch into the charging contacts on the base standby. The battery status indicator station. will continue to light up. The robot vacuum cleaner is reactivated Do not lift the robot vacuum cleaner by pressing any button on the remote by the area around the dust box as...
Adhesive strips are supplied for remove any problematic obstacles permanent fixing. or define the area they are in with Additional magnetic strips are available the magnetic strip. to order from Miele or online at www.miele-shop.com.
Finishing vacuuming Interrupting vacuuming – if vacuuming started from the base station The robot vacuum cleaner will return to the base station automatically and ^ Press the ~ II button on the remote recharge. control. The robot vacuum cleaner will also Press the button again to continue return to the base station and vacuuming.
Finishing vacuuming manually Turbo For vacuuming lightly soiled flooring with a short vacuuming duration. Selecting the vacuuming mode ^ Press the Power button on the remote control. The robot vacuum cleaner will switch into standby automatically after approx. ^ Press the Power button on the 60 seconds.
Option 2 (Display) ^ Press the Y sensor repeatedly until ^ Press the + or - direction button to set the symbol for the vacuuming mode the hour you want. you want lights up. ^ Press the OK button to confirm your ^ To start vacuuming, press the ~ II selection.
The settings will be displayed for Deactivating the acoustic signals approx. three seconds. The acoustic signals are activated as The robot vacuum cleaner will now start standard. You can deactivate and then to vacuum at the same time each day. reactivate them.
Ordering the correct accessories There is a storage compartment for the Original Miele accessories are cleaning brush on the top of the base identified by the "Original Miele" logo on station. the packaging. When to empty and clean the dust ^ Open the storage compartment and remove the cleaning brush.
Cleaning the roller brush ^ Remove the dust box and empty it. ^ Place the robot vacuum cleaner upside down on a level, clean surface. ^ Clean the bottom of the lid and also the filter grille using the brush end of the cleaning brush.
^ Remove the threads and hairs with the comb end of the cleaning brush. ^ Replace the roller brush. Make sure you position it carefully. ^ Press the two side brushes firmly but carefully onto the pins provided. Ensure that they match up correctly with the L and R markings.
Replacing the seal on the dust box ^ Unclip the cover. ^ Remove the front wheel. ^ Press the dust box release button and remove the dust box. ^ Remove any threads and hairs and ^ Unclip the seal from the bottom of the clean the front wheel with the brush dust box and carefully swing it out end of the cleaning brush.
^ Insert the new rechargeable battery. Replacing the rechargeable battery ^ Replace the cover of the rechargeable Replace it with an original Miele battery compartment. lithium-ion rechargeable battery type ^ Dispose of the old rechargeable 4S1P (14.8 V / 2.2 Ah / 32.5 Wh).
Maintenance The robot vacuum cleaner does not react. Maintaining the robot vacuum clea- The robot vacuum cleaner is switched ner and accessories off. Switch it on (press the ON switch on the side). Before cleaning the robot vacuum cleaner, switch it off with The batteries in the remote control have the OFF switch on the side.
Fault messages The robot vacuum cleaner is not charging. Before resolving any faults with The base station / robot vacuum the robot vacuum cleaner, switch it cleaner is not connected to the off with the OFF switch on the side. electricity supply correctly.
– your Miele Dealer person in strict accordance with current national and local safety regulations (BS 7671 in the UK). – Miele (see back of manual for contact details) The voltage and frequency are given on the data plate located underneath the Guarantee vacuum cleaner.
You will need to enter the specific product name. Miele will provide the source code for all components of software licensed under the GNU General Public Licence and comparable Open Source licences. For source code requests, please email info@miele.com.