Installation instructions Ceramic Cooktop KM 452 To prevent accidents and machine damage, read these instructions installation or use. M.-Nr. 05 797 870...
Page 4
2 tall cabinets, this is a fire hazard. a A minimum distance of 2" (50 mm) from the cooktop to the rear wall and a side wall must be maintained for safety. To eliminate the risk of burns or fire...
Page 5
However, under certain circumstances it may be possible for an installation in these applications. Please contact the nearest Miele Dealer or Technical Service Department with specific requirements. Because of the heat radiated downwards from this type of appliance we do not recommend installing it over a drawer.
Page 6
a Spring clips ^ Make the countertop cut-out following the dimensions given in the illustration. ^ Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and a right or left hand side wall. See also "Important Safety Instructions".
Page 7
( 7 5 m 3 ” ^ Fix the supplied spring clips, a, at the marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the 3.5 x 25 mm screws supplied.
Page 8
^ Feed the power cord down through the cut-out and connect the appliance to the power supply. ^ Position the cooktop on the spring clips, a. ^ Then with a hand on each side of the cooktop press down on the edges evenly until it clicks into position.
Page 9
Only operate the cooktop once it has been installed into the countertop. The cooktop is equipped with a flexible power cord consisting of 3 wires ready for connection to a grounded power supply: – 120/240 V, 60 Hz, 50 A fuse rating –...
Page 12
Alterations rights reserved / 0705 M.-Nr. 05 797 870 / 02 en - US...