Operating and Installation Instructions Oven H 4682 B H 4688 B en - US, CA To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 07 795 170...
Do not allow children to touch or play in, on or near the oven when it is in operation. The oven gets hot at the oven door glass, the vapor vent, the handle and the operating controls.
If there is any doubt, have the electrical system of the house checked by a qualified electrician. The oven is not to be operated until it has been properly installed within cabinetry. Installation, maintenance and repair work should be performed by an authorized service technician.
Page 6
Do not lean, sit, or place heavy items on the open oven door. Only use the Miele roast probe supplied with the oven. Contact Miele if you need to purchase a new probe. To prevent damage, remove the roast probe from the oven when it is not being used.
Page 7
Do not substitute towels or other bulky items for potholders. It is recommended to cover all cooked food that is left in the oven to be kept warm. This will prevent moisture from condensing on the interior of the oven.
Guide to the oven Control panel Upper heating element with catalytic liner Convection fan Catalytic liner Roast probe socket Rotisserie motor Non-tip, four level runners Data plate Oven door The right door hinge contains a door contact switch. This switch shuts off the heating element and convection fan when the door is opened during use.
Guide to the display Display shows the time or the functions. "Timer" touch control to set a timer independent of an oven function. "Clear" touch control to delete the last entry or to clear menu items.
When inserting a rack, pan or tray always check that the safety notches are at the rear of the oven. Once inserted into the oven these pieces can only be removed by raising the piece upwards and then pulling it...
Oven accessories Grease filter The filter helps to keep the oven fan clean from moisture and grease. Anytime meat or poultry is prepared insert the grease filter in front of the fan opening. Roast probe The roast probe reliably monitors the core temperature of meat and poultry during a roasting function.
The system lock can be activated to prevent children from operating the oven or to conserve standby power when the oven will not be used for some time (e.g. vacation). If activated the ) symbol will show in the display when the oven is switched off.
This oven uses soft key technology and an LCD display to assist in the selection of functions. To select a function, touch the control next to the desired function. The arrow next to each displayed function points to its corresponding control.
SETTINGS The default oven settings can be changed in the function "SETTINGS J". In this function you can customize the oven to suit your preferences. Settings may be adjusted by touching the appropriate touch control. Available settings: SETTINGS ( LANGUAGE J...
– whether or not the time is displayed, Clock-Display On Clock-Display Off ^ Touch the "OK" control to confirm the entries. If power to the oven is off for more than 4 days, the clock will have to be reset. LANGUAGE english ( english ( deutsch ( español...
The default temperature of each function can be adjusted within the range shown below. If a temperature out of the range is selected, the oven will revert to the default temperature. ^ Touch the control of the function whose default temperature you wish to alter.
Oven Light The "on" duration of the oven light can be altered. ^ Touch the control of the light setting you wish to choose. – "Off after 1 minute" The light goes off after the first minute of a function.
Tone Options Unique tones may be set for each of the two timers to differentiate the timers from an oven function tone. "Timer 1" and "Timer 2" The tone of Timer 1 and Timer 2 can be set to one of five tone options.
"Tone Short / Long" The duration of the timer and oven tones can be modified. – "Tone short" will beep in quick succession when an oven signal or the oven timer sounds. – "Tone long", a continuous tone will sound when an oven signal or the oven timer sounds.
SETTINGS Reset The factory settings of the oven can be restored through the "RESET" function. – Temperatures – Settings – Favorites Reset Temperatures If the request is confirmed with "Yes", all changed temperatures will be restored to the factory default.
Heat the oven New ovens may have a slight odor during the first few uses. To eliminate the odor quickly, the oven should be operated at a high temperature for 2 hours. Before heating the oven for the first time remove (if present) –...
Page 22
Before using the oven ^ Set the temperature to 500 °F (260 °C) using the keypad. ^ Set the timer to run the oven for 2 hours by touching the "Delay Start" control. ^ Select "Duration". Set the duration by entering "2", "0", "0"...
(160 °C) will be displayed next to the function name. Adjusting the oven temperature This oven has been factory tested for the optimum operating temperature of each function. This temperature can be adjusted if needed. ^ Touch the "Temperature" control.
A tone will sound once the oven has finished preheating. ^ Place the food in the oven once the temperature has been reached. The oven should not be preheated when using "AUTO ROAST".
Duration To enter the cooking time. After this time has elapsed the oven turns off automatically. The maximum duration time which can be entered is 11 hours 59 minutes. ^ Touch the "Delay Start" control.
30 minutes. If a duration time is entered, a delay start time will automatically be calculated. If no duration time is entered, the oven will calculate a duration based on the current time. ^ Confirm the entry by touching the "OK"...
Turning off the oven ^ Touch the "Off" control. The oven will turn off and the time of day will appear in the display. CONVECTION BAKE 325°F 12:23 At the end of cooking:...
Setting the timer Setting a timer The timer can be used to time any activity in the kitchen and can be set independently of a cooking function. Two alarms (Timer 1 and 2) can be selected simultaneously. A maximum time of 99 minutes and 59 seconds can be selected.
BAKE Baking tips When baking meat or poultry, insert the grease filter in front of the fan opening. Remember to remove the grease filter from the fan opening when baking pastries. If the filter is not removed, increase the baking time. The baking tray and the roasting pan do not need to be greased or covered with parchment paper.
Page 31
Default temperature . . . 375 °F (190 °C) The "BAKE" function works by heating food from below. This is similar to the "bake mode" of a conventional oven. Use this function for: – boxed cake mixes, – baked apples, –...
BAKE CONVECTION BAKE Default temperature . . . 325 °F (160 °C) This function actively circulates heated air throughout the oven cavity for a consistent baking temperature. Use this function for: – cookies, cakes, – quick breads, – yeast breads, –...
Page 33
SURROUND BAKE Default temperature . . . 375 °F (190 °C) The "SURROUND" function is a premium conventional baking mode. The oven heats with both the upper and lower heating elements without the convection fan. Use this function for: – souffles, meringues, –...
Page 34
Default temperature . . . 325 °F (160 °C) The "INTENSIVE" function generates heat from the lower heating element. The oven’s fan gently circulates the heated air to create a brick oven (convection) environment. Use this function for: – pizza, –...
Default temperature . . . 325 °F (160 °C) This premium convection function heats the oven to a high temperature to sear the meat, retaining moisture and tenderness. "Searing" appears in the display. Once...
Default temperature . . . 325 °F (160 °C) This function uses the convection fan to actively circulate heated air throughout the oven. This function does not spike the oven temperature for searing. Use this function for: – chicken pieces, –...
Page 37
ROAST SURROUND ROAST Default temperature . . . 400 °F (200 °C) "SURROUND ROAST" is a conventional roasting program for traditional recipes. Use this function for: – pot roast, – brisket, – stew. The recommended position is the 2 runner from the bottom.
ROAST Roasting tips – Always install the grease filter in the back of the oven before roasting. – The larger the cut of meat to be roasted, the lower the temperature should be. The roasting process will take a little...
^ Insert the probe into the middle of the meat. Make sure that the probe does not touch any bones and is not located in a fatty portion of the meat. Improper insertion of the probe could shut the oven off too early. ROAST...
Page 40
^ Put the meat into the oven. ^ Insert the short end of the roast probe into the socket on the right side of the oven so it clicks into place.
Page 41
10 minutes. During this time, the core temperature will rise 5 - 10 degrees. If the temperature probe is left in the food at the end of the cooking process, the oven display will show the core temperature first increasing and then decreasing. ROAST...
MASTER CHEF When using the "MASTER CHEF" function to cook meat or poultry insert the grease filter in front of the fan opening. The "MASTER CHEF" function contains an easy to use list of preset functions of commonly cooked foods such as pizza, chicken and french fries.
Page 43
Convection Bake 320 °F (160 °C) and cook or brown it for a few more minutes. – After use let the oven cool to room temperature before using it again for an automatic program. – When cooking poultry like goose or turkey, set the weight of the unstuffed poultry.
BROIL When broiling (all Broil functions), insert the grease filter in front of the fan opening. No default temperature Only the inner part of the upper heating element is used for a smaller area of intense heat from above. This function is excellent for broiling or searing small quantities.
BROIL MAXI BROIL No default temperature The entire upper heating element is used for intense heating from above. This function gives excellent browning and searing results. Use this function for: – chops, ribs – large quantities of meat, – browning large dishes. The recommended position is the 3 runner from the bottom.
Page 47
– tied roast, e.g. pork loin, beef tenderloin, etc., – kebabs. It requires a rotisserie kit which can be purchased from Miele. See "Optional accessories - Rotisserie" for more information. A separate operating manual is included with the rotisserie kit.
BROIL Broiling tips – Always insert the grease filter in the back of the oven before broiling. – To ensure even cooking, it is best to broil foods of a similar thickness at the same time. Most items should be turned halfway through broiling.
"favorite" to memory. Your "favorite" can now be recalled from the "FAVORITES" list. When selected the oven will automatically use the saved settings. ^ Touch "Clear" to cancel the running function if you are not cooking.
"Off" control. At the end of Sabbath After 72 hours, the oven will shut off and "Fault 55" will appear in the display. ^ Turn the oven off to reset it to normal operation. SABBATH ( BAKE ( SURROUND...
For best results, blot food with a paper towel before dehydrating. Foods to be dehydrated should be placed directly on the oven racks or on a drying screen (not supplied with oven).
This function maintains a low temperature perfect for yeast to rise. Place the dough in a large bowl on the oven rack positioned at the lowest runner level. Keep the oven door closed during this process.
DEFROST Default temperature ..75 °F (25 °C) This function allows you to defrost food at a constant temperature. Defrosting times depend on the type and weight of the food, and at what temperature it was deep-frozen. Defrosting tips –...
^ Do not use abrasive cleaners, ceramic cleaners, metal scourers, or oven cleaners on PerfectClean surfaces. ^ After cleaning, rinse thoroughly with water. The water should run off the surface easily, any residue will hinder this effect.
Do not use abrasive cleaning agents, hard brushes, metal scouring pads, steel wool, knives or other abrasive materials. Do not use oven sprays on any part of this oven. ^ Dry surfaces before reassembly.
Removing the oven door Please note: The oven door is quite heavy. It should be gripped firmly at the sides when being removed or refitted. ^ Open the door fully. ^ Flip up the locking clamps on each door hinge.
Page 58
Cleaning ^ Slowly shut the door until the protruding clamps stop the movement. Pull the door upward. See illustration.
Page 59
Refitting the oven door ^ Insert the door onto the hinges and open the door completely. ^ Flip the locking clamps down. Be sure that the locking clamps are flipped down when the door is reinstalled. Otherwise, when closing the door, the hinges could work loose from the guide holes and cause damage.
^ Pull the runner out of the front fixing to release it (1.). ^ Remove the runners by pulling them out of the rear of the oven (2.) Reassemble in the reverse order, ensuring all parts are correctly in place.
Removing the back panel ^ First remove the runners. ^ Loosen the screws in the rear panel and remove the panel. The oven must not be used without the back panel fitted. This could lead to injuries. Reassemble in the reverse order, ensuring all parts are correctly in place.
More time may be needed if the oven is heavily soiled. ^ Touch "OK". If the catalytic liner is damaged, a replacement may be purchased from your local Miele dealer or from Miele. ( BAKE... ( ROAST... ( MASTER CHEF...
Changing the light bulb ^ Remove the runners. ^ Spread a dishtowel on the oven floor to protect the enamel, in case the light cover falls. ^ Insert the supplied slide opener...
Page 64
Changing the light bulb ^ Replace the halogen bulb. Only use the following light bulb: 12 V, 10 W, 572 °F (300 °C) heat resistant, socket G4, type 64418 made by Osram. Do not touch the new light bulb with your fingers;...
Why is a noise heard after turning the oven off? This is normal. The fan will continue to run for a short time to cool the oven. When the oven has cooled sufficiently, the fan will turn off automatically.
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal here is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.
Optional accessories The following accessories are available for purchase from your Local Miele Dealer or from Miele. Gourmet Pizza form This circular form is suitable for cooking fresh or frozen pizzas, flat cakes, tarts, and baked desserts. Gourmet Baking stone...
Page 68
The skewer is inserted into the rotisserie motor in the back panel. Catalytic side panels The catalytic side panels are inserted behind the side runners and protect the interior walls from soiling. Please state the oven model when ordering.
Installation Instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
Caring for the environment Disposal of the packing materials The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
Electrical connection Data plate The silver data plate is located along the front side of the oven (door open). Power supply The oven comes equipped with a 7.2 ft. (2.2 m) power cord with a NEMA 14-30 P molded plug ready for connection to a: 120/208 V, 20 A, 60 Hz power supply.
Appliance and Cut-out Dimensions Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer.
Page 73
Appliance and Cut-out Dimensions Cut-out for power cord (min. 4" / 10 cm Power cord For the most current specifications see the Miele website.
^ Connect the oven to the electrical supply. The oven must be supported from underneath. ^ Place the oven into the cabinet as far as the oven trim and align. ^ Open the oven door and locate the two mounting screw holes in the oven frame.
Page 75
Set the time "Enter Time: hh:mm" will appear in the display once the oven is connected to electricity. ^ Set the current time using the keypad. ^ Save the time by touching the "OK" control. Installing the oven...
Page 76
Alteration rights reserved / 1110 (H 4682 B, H 4688 B) INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION. M.-Nr. 07 795 170 / 00 M.-Nr. 07 795 170 / 00...