Table of Contents
Advertisement
Before using for the first time
To ensure the correct functioning of
the appliance, let it stand for
between ½ and 1 hour after
transporting it to its final location
before connecting it to the mains.
Protective foil
The stainless steel strips and frames
have a layer of protective foil to prevent
scratching during transportation.
^ Carefully remove the protective foil
from the stainless steel strips.
Cleaning and care
^
Immediately after removing the
protective foil, apply the Original
Miele Care product for stainless
steel.
Important! Each time the Original
Miele Care product for stainless steel
is used, it forms a protective film
against dirt and water.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and then dry with a soft cloth.
Switching on and off
Switching the appliance on
The refrigerator section/PerfectFresh
zone and freezer section can be
switched on at the same time with the
main sensor on the right-hand side. This
is also possible via the On/Off button on
the left-hand side.
^ Press the master switch on the
right-hand side of the control panel.
The temperature display for the
refrigerator section lights up, and the
interior lighting comes on when the door
is opened.
Bars light up in the temperature display
for the freezer section.
The appliance starts cooling.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Cool pack
Place the cool pack in the top freezer
drawer or, to save space, on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching the appliance off
^ Press the master switch on the
right-hand side of the control panel
until both temperature displays go
out.
15
Hide quick links:
Advertisement
Table of Contents
