Miele H 5681 BP Operating And Installation Instruction
Hide thumbs
Also See for H 5681 BP:
- Operating and installation instructions (84 pages) ,
- Operating and installation instructions (84 pages)
Table of Contents
Related Manuals for Miele H 5681 BP
Summary of Contents for Miele H 5681 BP
-
Page 1: Operating And Installation Instructions
Operating and installation instructions Oven H 5681 BP, H 5688 BP en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. -
Page 3: Table Of Contents
Miele{home ........ - Page 4 Contents Symbols ............24 Functions .
- Page 5 Contents Language J ............47 Time .
- Page 6 Contents To refit the door ........... 66 To remove the FlexiClip telescopic runners .
-
Page 7: Warning And Safety Instructions
Warning and Safety instructions This appliance is not intended for This appliance conforms to current use by persons (including children) safety requirements. Inappropriate with reduced physical, sensory or use can, however, lead to personal mental capabilities, or lack of injury and damage to property. experience and knowledge, unless they are supervised whilst using it, or have To avoid the risk of accidents and... - Page 8 Warning and Safety instructions Technical safety Before connecting the appliance, make sure that the connection data on Installation, maintenance and the data plate (voltage and connected repairs may only be carried out by a load) match the mains electricity suitably qualified and competent supply.
-
Page 9: Correct Use
If the supply cord is damaged, it even cause it to catch fire. must be replaced by a Miele approved Do not use the "Full grill", "Economy service technician to avoid a hazard. - Page 10 Warning and Safety instructions If using alcohol in your recipes, high If using a tray made by a different temperatures can cause the alcohol to manufacturer, make sure that there is a vaporise and even to ignite on the hot gap of at least 6 cm between the heating elements.
- Page 11 Only use the Miele food probe Do not lean or sit on an open oven supplied with this oven. door, or place heavy items on it. Make...
-
Page 12: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment. -
Page 13: Guide To The Appliance
Guide to the appliance H 5681 BP, H 5688 BP a Control panel b Door lock for pyrolytic operation c Top heat / grill element with receiver for the wireless food probe d Steam inlets for Moisture plus e Back panel with air inlet for the fan... -
Page 14: Features
Features Oven controls Cooling system In addition to operating the various A cooling fan will come on cooking programmes to bake, roast automatically when a cooking and grill, the controls also offer the programme is started. The cooling fan following: mixes hot air from the oven cavity with cool room air before venting it out into –... -
Page 15: Energy Saving Features
Features Energy saving features Using residual heat The oven heating switches off Time of day display automatically shortly before the end of a cooking programme where the The time of day display will go out after 60 seconds (default setting). When the cooking duration has been oven is switched off, the display will not programmed or the food probe is being... -
Page 16: User Instructions
Features User instructions PerfectClean treated surfaces The User instructions supplied with The following surfaces are all treated your appliance in addition to these with a special PerfectClean finish: Operating and installation instructions – Side runners, contains detailed information about the –... -
Page 17: Energy Efficiency Rating According To En 50304
These and other accessories are also them being pulled right out when they available to order from the Miele Spare only need to be partially pulled out. Parts Department, your Dealer or via The trays and rack can then only be the internet at www.miele-shop.com. -
Page 18: Flexiclip Telescopic Runners
The FlexiClip telescopic runners can be the two rails that make up a shelf level. clipped into any of the existing shelf The telescopic runner with the Miele runners and pulled out of the oven to logo is fitted on the right. -
Page 19: Changing The Position Of The Flexiclip Telescopic Runners
Features Changing the position of the Food probe FlexiClip telescopic runners Make sure that the oven has cooled down before moving the FlexiClip This appliance is supplied with a runners. wireless food probe. Take care not to burn yourself on The food probe is stored in a holder in them. -
Page 20: Anti-Splash Insert (Depending On Model)
Features Anti-splash insert (depending on model) The anti-splash insert should be placed in the universal tray when grilling or roasting. The juices from the food being cooked collect under the anti-splash insert. This prevents them from spitting and making the oven dirty. The juices can then be used for making gravy and sauces. -
Page 21: Miele{Home
Miele{home Miele|home communication enabled appliances use the household electrical network c to communicate information about their operational status and the progress of the programme to a master appliance d / e. These instructions are for a Optional accessories communication enabled oven b that –... -
Page 22: Controls
Controls The appliance is operated via the display a and the electronic sensors next to and below the display. These react to finger contact. A keypad tone will sound each time a sensor is touched. The volume of the keypad tone can be adjusted or switched off altogether (see "Settings - Volume - Keypad tone"). -
Page 23: Display
Controls Display Main menu ß Fan plus All information about functions, temperature, cooking durations, Auto- ß Conventional heat matic programmes and settings is ß Full grill shown in the display. ß Pyrolytic After the appliance has been switched on by touching the K sensor, the Main ß... -
Page 24: Symbols
Controls Symbols The following symbols will appear in the display in addition to the text: Symbol Meaning Appears beside an option and is allocated to a sensor C. You select the option you want by touching the sensor beside the dot. A maximum of 3 options can be shown in the display. - Page 25 Controls When a function is selected, the following symbols may appear in the display, depending on setting: Symbol Meaning Duration Finish Start time Programme finished Rapid heat-up phase, Rapid searing phase Heating-up phase, Searing phase Core temperature when using the food probe Fan plus, Fan heat Intensive bake Moisture plus...
-
Page 26: Functions
Functions Your oven has a range of oven functions for preparing a wide variety of recipes. These include: a Top heat/grill element (under the roof of the oven) b Bottom heating element (under the floor of the oven) c Ring heating element (behind the intake vent for the fan) d Fan (behind the intake vent for the fan) e Evaporation system These components are combined in various ways, depending on the oven... - Page 27 Functions Function Notes Conventional heat – For baking traditional recipes, e.g. fruit cake, casseroles. [a + b] – Also ideal for soufflés. – If using an older recipe or cookbook, set the oven temperature for Conventional heat 10°C lower than that recommended.
-
Page 28: Before Using For The First Time
"Settings - Language J" message to tell you that: to get back to the correct language. – your appliance is equipped for the Miele|home system. Clock format – your appliance has been successfully set up to use it for the first time. -
Page 29: Cleaning And Heating Up For The First Time
Before using for the first time ^ Heat the empty oven for at least an Cleaning and heating up for hour. the first time Please ensure the kitchen is well Before use, please remove ventilated during this operation. – any stickers from the oven and Close doors to other rooms to from any accessories. -
Page 30: Operation
Operation ^ Select the option you require. Automatic programmes Each Automatic programme has a Your appliance has a wide range of sub-menu with further options which will Automatic programmes to enable you now show in the display. to achieve excellent results with ease. -
Page 31: Manual Operation
Manual operation Selecting "Change" brings up all the To operate the oven manually, switch options which can be changed during the appliance on, select the oven the current programme, e.g. the function and temperature, then selected temperature. switch it off again once you have ^ At the end of the cooking finished cooking. -
Page 32: More About Manual Operation
More about manual operation To change the temperature Automatic switch-off can be selected As soon as you have selected a when operating the oven manually. function, the recommended You can also adjust the heat-up temperature with the temperature range phase and the humidity level inside which can be set in brackets beside it the oven. -
Page 33: Entering The Duration, A Start Time Or Finish Time
More about manual operation Entering the Duration, a Start To use Automatic switch-off time or Finish time To switch a programme off automatically select Duration or Finish By entering the Duration, Start time or and enter the time required. Finish time, the cooking process can be programmed to switch off, or on and Example: off, automatically. -
Page 34: Delaying The Start With Automatic Switch-Off
More about manual operation Delaying the start with Automatic Sequence of the cooking programme switch-off when using Automatic switch-off The following will appear in the display: We recommend using automatic switching on and off when roasting. Before the programme starts However, do not delay the start for –... -
Page 35: Changing Or Deleting An Entered Cooking Time
More about manual operation Changing the heating-up After the cooking programme has finished phase – The cooling fan will continue to run With the Fan plus, Auto roast and for a while after the oven has been Conventional heat functions, the switched off to prevent any humidity Heating-up phase will appear with the building up in the oven, on the... -
Page 36: Pre-Heating The Oven
More about manual operation Pre-heating the oven To pre-heat the oven: ^ Select the required function and set Most dishes can be placed in a cold oven. They will then make use of the the temperature. heat produced during the heating ^ Wait for the oven to reach the set phase. -
Page 37: Activating Moisture Reduction
More about manual operation Activating moisture reduction Change function It is a good idea to use this function You can change the function selected when cooking items which are moist on via this option. the inside but which should be crispy The times already entered will be kept. -
Page 38: User Programmes
User programmes The User programmes menu Up to 25 frequently used recipes can be saved under a user-defined name, and If user programmes have already been then called up again as required. created and saved, the following will Either appear: ß... -
Page 39: To Create A User Programme
User programmes To create a User programme After confirming with "Continue", select the name given in the display, or enter If programmes already exist under your own name. To do this: User programmes, the "Create" ^ Use the sensors next to arrows option has to be selected in order to to select a character. -
Page 40: Moisture Plus
Moisture plus The "Moisture plus" function uses a Please refer to the "Moisture plus" steam injection system. booklet supplied with your oven for Water is taken into the steam injection further information and a selection of system via the tube underneath the recipes. -
Page 41: Automatic Programmes
Moisture plus Automatic programmes Night baking Automatic programmes with Moisture Some of the Automatic programmes for plus set the optimium temperature, the bread and rolls have the option of degree of moisture and also the baking during the night, so that you can duration automatically. -
Page 42: Moisture Plus D
Moisture plus Moisture plus d After selecting Moisture plus you need to set the number of bursts of steam. When using the Moisture plus function The options are: you will need to enter ß Automatic – the temperature (at least 130 °C), This requires enough water for one –... -
Page 43: Using Moisture Plus D
Moisture plus Using Moisture plus d The amount of water required will be drawn up into the oven. As the water is ^ Place the food in the oven. taken in, bars will appear in the display. ^ Select Moisture plus d. The amount of water specified will be more than the amount which is actually ^ Select a temperature. -
Page 44: To Evaporate Residual Moisture
Moisture plus To evaporate residual moisture The residual moisture evaporation process If there is still water in the steam injection system at the end of a The oven will heat up to approx. programme or if the programme is 150 °C, and the residual water in the cancelled, you will be prompted to oven cavity will evaporate. -
Page 45: To Cancel The Residual Moisture Evaporation Process
Moisture plus Descaling To cancel the residual moisture evaporation process The oven will need to be descaled depending on the number of cooking After the appliance has been switched on, the prompt to evaporate programmes using Moisture plus which residual moisture will appear in the have been run and the amount of water display. -
Page 46: Minute Minder (Egg Timer) N
Minute minder (egg timer) N The minute minder can be used to time At the end of the time set for the minute any activity in the kitchen, e.g. boiling minder eggs. – the N symbol will flash. You can enter a time of up to a –... -
Page 47: Settings
Settings Your appliance is supplied with a Currently selected settings are number of standard default settings. indicated by a "L" and without a " " next to them. To change a setting: ^ Select the "Settings J" option. Settings cannot be altered while a cooking programme is in progress. -
Page 48: Time
Settings Time To set the time of day The options are: The time of day is set using either the ß Display numerical keypad or the ß Clock format sensors: ß Set First enter the hours and confirm with "OK". Then enter the minutes and If there is a power cut, the current confirm with "OK". -
Page 49: Main Menu
Settings Main menu Cooling fan run-on You can change the order in which The cooling fan will continue to run for a options appear in the main menu. Up to while after the oven has been switched three options can be placed at the off to prevent any humidity building up beginning of the main menu (excluding in the oven, on the control panel or in... -
Page 50: Pyrolytic
Settings Pyrolytic Start ß With reminder ß Automatic ß A reminder to carry out the pyrolytic (Factory default setting) cleaning process will appear in the A programme will start automatically display. approx. 20 seconds after making your last entry without having to ß... -
Page 51: Display
Settings Display Volume Contrast Buzzer tones The contrast is represented by a bar The volume is represented by a bar with seven segments. with seven segments. P P P P G G GM P P P P G G GM Factory default: Four blocked Factory default: Three blocked segments. -
Page 52: Keypad Tone
Settings ß Permitted Keypad tone The system lock is active. The volume of the keypad tone, which symbol appears in the bleeps when touched, can be changed display, as soon as the appliance is or the sound switched off completely. switched off. -
Page 53: Units
Settings Units Factory default ß All settings Temperature Any settings that you have altered ß °C will be reset to the factory default (Factory default) setting. ß User programmes ß °F All saved user programmes will be deleted. Showroom programme ß... -
Page 54: Cleaning And Care
– solvent-based cleaning agents, discolour. – stainless steel cleaning agents, Clean the front using a damp Miele – dishwasher cleaner, microfibre E-cloth or with a clean – oven sprays, sponge and a solution of hot water and washing-up liquid. -
Page 55: Accessories
Cleaning and care Accessories FlexiClip telescopic runners Remove all accessories as well as Do not clean FlexiClip telescopic the runners and any extra runners in a dishwasher. This would accessories such as FlexiClip remove the special lubricant. runners from the oven interior before starting the pyrolytic cleaning When cleaning do not use: process. -
Page 56: Lubricating The Flexiclip Telescopic Runners
Cleaning and care Normal soiling Please note: Clean the surfaces using a damp Miele When baking cakes with moist toppings microfibre E-cloth or with a clean or fillings e.g. fruit crumble, be careful sponge and a solution of hot water and not to let them spill over. -
Page 57: Perfectclean
Cleaning and care PerfectClean Normal soiling Clean as soon as possible after each Before using for the first time remove use with a dishcloth, soft sponge or a any stickers from PerfectClean soft nylon brush, and a solution of hot surfaces. - Page 58 Cleaning and care Do not attempt to use on a hot oven or The following cause lasting damage accessories. Allow the PerfectClean to the surface structure and reduce surfaces to cool down to room the anti-stick effect and must not be temperature before applying an oven used on PerfectClean surfaces: spray.
-
Page 59: Oven Interior
Cleaning and care Oven interior Most cooking residues can be removed with a damp cloth and a mild solution of The oven interior is coated with dark hot water and washing-up liquid. pyrolytic enamel which facilitates cleaning. Never use hard brushes, hard This is a particularly hard enamel with sponges, wire wool pads*, knives or an extremely smooth surface and very... - Page 60 Cleaning and care Pyrolytic cleaning of the oven At the end of the programme it will not be unlocked until the temperature interior inside the oven has dropped to below Before starting a pyrolytic cleaning 280 °C. process please note the following: If the pyrolitic cleaning programme has Remove any coarse soiling from the been started by mistake or if the...
- Page 61 Cleaning and care After the pyrolytic process, any The pyrolytic process will be debris (e.g. ash) can easily be wiped cancelled, away. – if the oven is switched off. Remember to wait until the oven has – if another function is selected during cooled down before doing so! the pyrolytic process.
-
Page 62: To Remove The Oven Door
Cleaning and care ^ Then lift the door upwards as far as it To remove the oven door will go. The oven door is connected to the oven by hinges. Do not attempt to take the door off the hinge guides when it is in a horizontal position. -
Page 63: To Dismantle The Oven Door
Cleaning and care To dismantle the oven door Always remove the oven door before The oven door is made up of four dismantling it. panes of glass and has vents at the top and bottom. ^ Place the door on a protective surface (e.g. - Page 64 ^ Remove the seal. ^ Clean the glass panes and other parts with a damp Miele E-cloth or a clean sponge and a solution of hot water with a little washing-up liquid. Wipe dry using a soft cloth.
- Page 65 Cleaning and care ^ To reassemble the door: When refitting the upper pane, the The two middle panes are identical. more angled corner must be To ensure they are refitted correctly, inserted at the top left. one of the corners is more angled than the others.
-
Page 66: To Refit The Door
Cleaning and care To refit the door ^ Push the inner pane into the plastic strip and insert it in the retainers. ^ Hold the door securely at both sides and carefully fit it back onto the hinge guides. Make sure that the door goes back ^ Flip the glass pane retainers inwards on straight. -
Page 67: To Remove The Flexiclip Telescopic Runners
Cleaning and care ^ Open the door fully. To remove the FlexiClip telescopic runners Make sure the oven heating elements are switched off and cool. Take care not to burn yourself on them. ^ Flip both locking clamps back up as far as they will go into a horizontal position. -
Page 68: To Remove The Side Runners
Cleaning and care To remove the side runners To lower the top heat/grill element Make sure the oven heating elements are switched off and cool. Make sure the oven heating Take care not to burn yourself on elements are switched off and cool. them. -
Page 69: Descaling
The descaling programme can be run supplied with the appliance. These at any time. have been specially formulated and are available from the Miele Spare However, to ensure the oven functions Parts Department or via the internet correctly you will be automatically on www.miele-shop.com. -
Page 70: Preparation
Cleaning and care Preparation Start the descaling process. ^ Dissolve one descaling tablet in ^ Select the "Descale" option. approx. 600 ml of cold tap water. ^ Press the OK sensor to start the ^ Place the universal tray on the top suction process. - Page 71 Cleaning and care The steam injection system will need to After the third rinse, residual water will be cleaned at the end of the need to be evaporated from the steam descaling process to remove all traces injection system. of descaling solution. Before proceeding, remove the Prompts to do this will appear in the plastic tube and the container from...
-
Page 72: Problem Solving Guide
Problem solving guide With the aid of the following guide, minor problems can be easily corrected without contacting Miele. If you cannot resolve a problem following these instructions please contact Miele Service. Do not attempt to open the appliance casing yourself! - Page 73 Problem solving guide Problem Possible cause and remedy ^ Disconnect the appliance from the electricity supply: The top lighting is not working. Switch off and unplug at the socket, or disconnect the fuse, or switch off at the isolator as appropriate. ^ Turn the lamp cover a quarter turn anti-clockwise to release it and then pull it downwards to take it out.
- Page 74 – Fault 32: The door has not locked for the pyrolytic cleaning process. Switch the oven off and start the pyrolytic cleaning process again. If the fault code appears again call the Miele Service Department. – Fault 33: The door lock for the pyrolytic cleaning process will not open.
-
Page 75: After Sales Service
– your Miele Dealer visible on the front frame of the oven, with the door fully open. Please note that telephone calls may – the Miele Customer Contact Centre be monitored and recorded to (see back cover for address). improve our service. -
Page 76: Optional Accessories
A range of additional accessories as well as cleaning and care products are available for your Miele oven. Depending on product they are available to order from your Miele Dealer, the Miele Spare Parts Department or via the internet on www.miele-shop.com. - Page 77 Optional accessories Gourmet oven dish Miele E-cloth The gourmet oven dish can be placed Removes grease and stains and leaves in the oven directly on the runners. It no smearing. Suitable for cleaning has non-tip safety notches like the surfaces such as stainless steel, glass,...
-
Page 78: Electrical Connection
(CSA) accessible after the appliance has may be used (available from the been built in. Miele Customer Contact Centre). If the switch is not accessible after installation (depending on country) an additional means of disconnection must be provided for all poles. -
Page 79: Building-In Diagrams
Building-in diagrams Dimensions are give in "mm". Appliance and niche dimensions Installation in a base unit Installation in a tall unit * Appliances with glass front ** Appliances with metal front... -
Page 80: Front Dimensions
Building-in diagrams Front dimensions A H 5681: 47.5 H 5688: 45.0 B Appliances with glass front: 2.2 Appliances with metal front: 1.2... -
Page 81: Installing The Oven
Installing the oven The appliance must not be Turn off the mains electricity supply operated until it has been correctly to the isolator. installed in its housing unit. ^ Connect the mains cable from the Otherwise it poses an electric shock oven to the isolator. - Page 84 Alteration rights reserved / 22 / 3709 M.-Nr. 07 652 780 / 00 (H 5681 BP, H 5688 BP)