LG 26LS3500-JB Manual

Led lcd tv

Hide thumbs

Quick Links

Download this manual

LED LCD TV

サービスマニュアル

CHASSIS : LE22A

MODEL : 26LS3500

CAUTION

BEFORE SERVICING THE CHASSIS,

READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

P/NO : MFL67469508 (1205-REV00)

North/Latin America

Europe/Africa

Asia/Oceania

26LS3500-JB

Internal Use Only

http://aic.lgservice.com

http://eic.lgservice.com

http://biz.lgservice.com

Printed in Korea

Table of Contents

Chapters

Summary of Contents for LG 26LS3500-JB

Page 1 Internal Use Only North/Latin America http://aic.lgservice.com Europe/Africa http://eic.lgservice.com Asia/Oceania http://biz.lgservice.com LED LCD TV サービスマニュアル CHASSIS : LE22A MODEL : 26LS3500 26LS3500-JB CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL. P/NO : MFL67469508 (1205-REV00) Printed in Korea...
Page 2 目次 ............................2 安全上の注意事項 ......................3 サービス上の注意事項 ..................... 4 仕様 ............................6 調整方法 ..........................9 分解図 ..........................20 サービスシート ........................Copyright © LG Electronics. Inc. All rights reserved. - 2 - LGE Internal Use Only Only for training and service purposes...
Page 3: 安全上の注意事項
測定リードを、アンテナ端子やヘッドホンジャックなどの露出金属部に順番に接触させて抵抗値を測定します。 1.5 kΩ/10W 露出金属部とシャーシとの間に帰路抵抗器が存在する場合、抵抗計の指示は1 ～ 5.2 MΩの範囲となります。この帰路抵抗器が存在しない場合、抵抗計の指示は無限大です。なんらかの異常が認められた場合は、受信機をユーザーに返却する前に、その異常を修復する必要があります。 Copyright © LG Electronics. Inc. All rights reserved. - 3 - LGE Internal Use Only Only for training and service purposes...
Page 4: サービス上の注意事項
1. 半導体部品や半導体を使用したアセンブリを扱う直前に、接地されていることがわかっている部分に触れて体内に蓄積されている静電気を放電させます。または、市販の放電用リストストラップを装着します。感電の危険を防止するために、テスト中に製品などに通電する場合は、このストラップは外してください。 2. ES 部品を使用した電気系アセンブリを取り外した後、それをアルミホイルのような導電性の表面上に置きます。これにより、静電荷の蓄積が発生せず、静電気にさらされることもなくなります。 Copyright © LG Electronics. Inc. All rights reserved. - 4 - LGE Internal Use Only Only for training and service purposes...
Page 5 ジャンパ線を部品のリードに巻き付けてしっかり固定し、はんだけします。付けします。 5. プリント基板の銅箔面側を検査して、元からあるリードが確実には注意 : この絶縁被覆付きジャンパ線は、部品や鋭い縁に接触しなんだ付けされていることを確認します。はんだ表面に輝きがない場いように引き回してください。合は、はんだを加熱していったん溶かし、はんだ付けし直します。必要に応じて、はんだを追加してください。 Copyright © LG Electronics. Inc. All rights reserved. - 5 - LGE Internal Use Only Only for training and service purposes...
Page 6 32インチ 0.51075 x 0.17025 LC320EXN-SEA2, ッチ 32LS3590/32LS3500 26インチ 0.4215 × 0.1405 LC260EXN-SDA1, 26LS3500 22インチ 0.1165 x 0.3495 V216BG1-LE1, 22LS3500 Copyright © LG Electronics. Inc. All rights reserved. - 6 - LGE Internal Use Only Only for training and service purposes...
Page 7 28.32 640*480 31.469 59.94 25.17 VESA(VGA) 800*600 37.879 60.317 VESA(SVGA) 1024*768 48.363 60.004 VESA(XGA) 1152*864 54.348 60.053 80.002 VESA Copyright © LG Electronics. Inc. All rights reserved. - 7 - LGE Internal Use Only Only for training and service purposes...
Page 8 VESA(XGA) 1152*864 54.348 60.053 80.002 VESA 1360*768 47.712 60.015 85.50 VESA(WXGA) 5.4.3. HDMI EDIDデータ * HDMI EDIDデータ：調整仕様を参照 Copyright © LG Electronics. Inc. All rights reserved. - 8 - LGE Internal Use Only Only for training and service purposes...
Page 9: 調整方法
(7) 内部プリセットテスト (8) モーションリモートコントローラ検査 (9) 3D機能テスト (10) 出力条件の調整 (6) OKまたはNGを確認します。 (11) 音響仕様 (12) ファクタリングオプションデータ入力 Copyright © LG Electronics. Inc. All rights reserved. - 9 - LGE Internal Use Only Only for training and service purposes...
Page 10 (4) 実行をクリックし、 [OK]または[NG]を確認します。 (2) ソフトウェアバージョンが自動的に検出されます。 -> ソフトウェアのダウンロード処理が自動的に実行されます。 (3) メモリからファイルをコピーしていることを示すメッセージが表示されます。 (4) ダウンロードが完了すると、 DCオフからDCオンに切り替わります。 (5) TVをオンにして、更新されたソフトウェアバージョンとツールオプションを確認します。 Copyright © LG Electronics. Inc. All rights reserved. - 10 - LGE Internal Use Only Only for training and service purposes...
Page 11 ADJ （調整）キーを使用）。（オプションを変更しない場合、入力メニューでモデル仕様が異周波数LED 周波数LED なる可能性があります）オプション値については、各メインシャーシアッシーのジョブ表現（EBTxxxxxxxx）を参照してください。注：機能検査完了後に“IN-STOP （イン-停止） ”キーを押さないでください。 Copyright © LG Electronics. Inc. All rights reserved. - 11 - LGE Internal Use Only Only for training and service purposes...
Page 14 A0 C0 0x48 （ HDMI2） 3A 80 2D 40 0x38 （ HDMI3） A0 5A 00 1D 80 0X28 （ HDMI4） Copyright © LG Electronics. Inc. All rights reserved. - 14 - LGE Internal Use Only Only for training and service purposes...
Page 15 D0 1E Widevine ：OK A0 5A 00 A0 70 RFレシーババー：xx.xx.xx 5. EDID A0 5A 00 1A 00 ジョン Copyright © LG Electronics. Inc. All rights reserved. - 15 - LGE Internal Use Only Only for training and service purposes...
Page 16 (10) 3つのモード（高/中/低）すべてを調整します。 R/G/Bゲインの - 自動ホワイトバランス調整装置（自動調整用）いずれかを修正してその他を変更します。 (11) 調整が完了したら、 “COPY ALL”と入力します。 (12) リモコンのEXIT （終了）キーを押して調整モードを終了します。 Copyright © LG Electronics. Inc. All rights reserved. - 16 - LGE Internal Use Only Only for training and service purposes...
Page 17 42LM7600, 32/42LM6690 (Normal line) 座標が仕様未満になることがあります）。高中低エイジングステ時間ージ（最小） 10-19 20-35 36-49 50-79 80-119 Over 120 Copyright © LG Electronics. Inc. All rights reserved. - 17 - LGE Internal Use Only Only for training and service purposes...
Page 18 100 mA、 1秒（ライン） >FG） 100 mA、 1分（OQC）耐電圧（FGなし） 100 mA、 1秒（ライン） 100 mA、 1分（OQC） Copyright © LG Electronics. Inc. All rights reserved. - 18 - LGE Internal Use Only Only for training and service purposes...
Page 19 5.9. Wi-Fiテスト 5.9.1. プロセス (1) TVをオンにします (2) ネットワークメニューで、ネットワーク接続オプションを選択します。 (3) ネットワーク接続で、接続開始ボタンを選択します。 (4) 下の図のように何らかのAPが検出された場合、システムは正常に動作しています。 Copyright © LG Electronics. Inc. All rights reserved. - 19 - LGE Internal Use Only Only for training and service purposes...
Page 20: 分解図
X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. Copyright © LG Electronics. Inc. All rights reserved. - 20 - LGE Internal Use Only Only for training and service purposes...
Page 21 MID_MAIN_1 2011.12.13 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 22 MID_MAIN_2 2011.12.19 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 23 MID_MAIN_3 2011.12.09 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 24 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. DDR ONE SIDE Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 25 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR LED driver THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. ALL_TN_LED_DRIVER Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 26 2011.12.12 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. MICOM Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 27 HDMI 4 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 28 FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 29 FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 30 IR / KEY 2011.07.21 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 31 USB3_HUB_WiFi 2011.08.09 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 32 LAN_VERTICAL 2011.06.29 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 33 2011.04.30 AMP_NEO ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 34 FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 35 CI SLOT 2011.04.17 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 36 FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. JAPAN_TUNER Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 37: Table Of Contents
LVDS_JAPAN_HD 2011.08.26 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 38 11.04.30 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 39: The Symbol Mark Of This Schemetic Diagram Incorporates
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 40 2011.08.09 MID_POWER ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 41 2011.06.15 ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR SMALL_POWER THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 42 東京都港区赤坂 2-17-22 赤坂ツインタワー本館9階〒107-8512 電話 : 03-3588-1912 (代表)
Page 43: Copyright Ⓒ 2012 Lg Electronics. Inc. All Right Reserved
2012 LED/LCD TV Engineering guide Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 1 / 97 Only for training and service purposes LGE Internal Use Only...
Page 44: Only For Training And Service Purposes
- Instruction of new sub ass’ys - How to use tool - Download 9. Adjust way of new features (widevine…) 10. Repair guide Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 2 / 97 Only for training and service purposes LGE Internal Use Only...
Page 45: Lge Internal Use Only
F. Exterior error Exterior defect First of all, Check whether there is SVC Bulletin in GCSC System for these model. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 3 / 97 Only for training and service purposes LGE Internal Use Only...
Page 46 Exchange LED driver Board (PSU) A-3/5 Other : PSU Module Exchange Module itself (1) A-4/5 Exchange Module itself (2) A-5/5 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 4 / 97 Only for training and service purposes LGE Internal Use Only...
Page 47 Always check & record S/W Version and White Replace Main Board Re-enter White Balance value Balance value before replacing the Main Board Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 5 / 97 Only for training and service purposes LGE Internal Use Only...
Page 48 No Video/ replace voltage? No audio ( 3.5V,12V,20V or MAIN B/D 24V…) Replace Power Board and repair parts Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 6 / 97 Only for training and service purposes LGE Internal Use Only...
Page 49 Contact with signal distributor Tuner soldering Picture? or broadcaster (Cable or Air) Normal Picture? Replace Main B/D Close Close Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 7 / 97 Only for training and service purposes LGE Internal Use Only...
Page 50 Normal (match with installed ANT) or broadcaster Picture? (Cable or Air) Normal Picture? Close Close Close Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 8 / 97 Only for training and service purposes LGE Internal Use Only...
Page 51 RGB/ Check external External device HDMI/DVI device and /Cable Replace Main B/D error cable normal Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 9 / 97 Only for training and service purposes LGE Internal Use Only...
Page 52 Main B/D HDMI/ External Input, Component, RGB and HDMI/DVI by connecting Jig, pattern Generator ,Set-top Box etc. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 10 / 97 Only for training and service purposes LGE Internal Use Only...
Page 53 ※ Normal Replace Main B/D voltage? Close Normal Check ST-BY 3.5V voltage? ☞A18 Replace Power B/D Replace Power Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 11 / 97 Only for training and service purposes LGE Internal Use Only...
Page 54 Power off by unknown status except listed case "POWEROFF_ABNORMAL1" Power off by abnormal status except CPU trouble Abnormal "POWEROFF_CPUABNORMAL" Power off by CPU Abnormal Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 12 / 97 Only for training and service purposes LGE Internal Use Only...
Page 55 Speaker off Cancel OFF Replace Power Board and repair parts Check Speaker Disconnection Replace MAIN Board disconnection Replace Speaker Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 13 / 97 Only for training and service purposes LGE Internal Use Only...
Page 56 Connect and check Normal Check and fix other external device audio? external device Check and fix external device Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 14 / 97 Only for training and service purposes LGE Internal Use Only...
Page 57 If R/C operate, Normal Close Explain the customer operating? cause is interference from light in room. Replace R/C Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 15 / 97 Only for training and service purposes LGE Internal Use Only...
Page 58 Check and fix DVI, Optical Replace Main B/D Fix in external device/cable Recognition error accordance with technical information Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 16 / 97 Only for training and service purposes LGE Internal Use Only...
Page 59 “Part related to nose” in the Owner’s Manual. as shown in the solution manual (For models without any fix information, provide the description) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 17 / 97 Only for training and service purposes LGE Internal Use Only...
Page 60 ☞A28 Cabinet Replace cabinet damage Remote controller Replace remote controller damage Stand Replace stand dent Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 18 / 97 Only for training and service purposes LGE Internal Use Only...
Page 61 D. Function error_ No response in remote Remote controller operation checking method controller, key error D. VCOM Adjustment Sequence of the Vcom adjustment Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 19 / 97 Only for training and service purposes LGE Internal Use Only...
Page 62 3. After recording the R, G, B (GAIN, Cut) value of Color Temp (Cool/Medium/Warm), re- enter the value after replacing the MAIN BOARD. enter the value after replacing the MAIN BOARD. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 20 / 97 Only for training and service purposes...
Page 63 Lamp : A-Dim LED : N.C PWM Dim #1 GND/P_DIM2 Error-out • Lamp SCANNING Model : PWM Dim #2 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 21 / 97 Only for training and service purposes LGE Internal Use Only...
Page 64 - signal test select channel When the signal is strong, use the attenuator (-10dB, -15dB, -20dB etc.) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 22 / 97 Only for training and service purposes LGE Internal Use Only...
Page 65 1. Checking method for remote controller for adjustment Version Press the IN-START with the remote controller for adjustment Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 23 / 97 Only for training and service purposes LGE Internal Use Only...
Page 66 LCD TV connection diagram (1) date <ALL MODELS> As the part connecting to the external input, check the screen condition by signal Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 24 / 97 Only for training and service purposes LGE Internal Use Only...
Page 67 1. Check the signal strength or check whether the screen is normal when the external device is connected. 2. After measuring each voltage from power supply, finally replace the MAIN BOARD. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 25 / 97...
Page 68 Checking item : 1. Defective pixel 2. Residual image 3. MODULE error (ADD-BAR,SCAN BAR..) 4.Video error (Classification of MODULE or Main-B/D!) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 26 / 97 Only for training and service purposes LGE Internal Use Only...
Page 69 Front LED control : Menu Option Power Indicator Standby light ON ST-BY condition: Red Power ON condition: white Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 27 / 97 Only for training and service purposes LGE Internal Use Only...
Page 70 Lamp : A-Dim LED : N.C PWM Dim #1 GND/P_DIM2 Error-out • Lamp SCANNING Model : PWM Dim #2 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 28 / 97 Only for training and service purposes LGE Internal Use Only...
Page 71 Lamp : A-Dim LED : N.C PWM Dim #1 GND/P_DIM2 Error-out • Lamp SCANNING Model : PWM Dim #2 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 29 / 97 Only for training and service purposes LGE Internal Use Only...
Page 72 1. Press the IN-START button of the remote controller for adjustment 2. Check the entry into adjustment item 3 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 30 / 97 Only for training and service purposes LGE Internal Use Only...
Page 73 1. Press the MENU button on the remote controller 2. Select the AUDIO function of the Menu 3. Select TV Speaker from Off to On Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 31 / 97 Only for training and service purposes...
Page 74 ③ Connect the tester RX1 to the speaker terminal and if you hear the “Chik Chik” sound when you touch the GND and output terminal, the speaker is normal. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 32 / 97...
Page 75 When checking the Pre-Amp when the power is in ON condition, it is normal when the Analog Tester needle moves slowly, and defective when it does not move at all. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 33 / 97...
Page 76 ■ Push the OK key to store the value. Then the message “Saving OK” is pop. ■ Press the exit key to finish V-COM adjustment. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 34 / 97 Only for training and service purposes...
Page 77 3.3V I2C_SCL5 IC104 RGB,H/V PC-RGB I2C_SDA5 L/R In PC-AUDIO HDCP EEPROM SPDIF OUT OPTIC IC100 Ethernet UART RS-232C MAX3232 (IC4000) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 3.5V Only for training and service purposes LGE Internal Use Only...
Page 78 [AIN2_R_AADC] RGB_PC DSUB_DET [OPCTRL7] RGB_DDC_SCL [VGA_SCL] EDID EEPROM RGB_DDC_SDA AT24C02BN-SH-T [VGA_SDA] DSUB_R+, DSUB_G+, DSUB_B+ [RP],[GP],[BP] DSUB_VSYNC, DSUB_HSYNC [VSYNC], [HSYNC] MICOM [EDID_WP] Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 79 CK+/-_HDMI1_JACK, D0+/-_HDMI1_JACK, D1+/-_HDMI1_JACK, D2+/-_HDMI1_JACK DDC_SCL_2_JACK DDC_SDA_2_JACK HDMI_HPD_2_JACK CK+/-_HDMI2_JACK, D0+/-_HDMI2_JACK, D1+/-_HDMI2_JACK, D2+/-_HDMI2_JACK Main SoC DDC_SCL_3_JACK DDC_SDA_3_JACK HDMI_HPD_3_JACK CK+/-_HDMI3_JACK, D0+/-_HDMI3_JACK, D1+/-_HDMI3_JACK, D2+/-_HDMI3_JACK Q3001 HDMI_CEC MICOM Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 80 +12V [USB_DP_P0] +5V_USB /USB_OCD2 [GPIO42] IC8802 IC4300 [GPIO45] USB_CTL2 SOC_TX TX / RX [U0TX] [U0RX] SOC_RX 9PIN DSUB NEC_RXD NEC_TXD MICOM Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...
Page 81 I2C_SDA1 (STA380BW) [STB_SDA] I2C_SCL1 [STB_SCL] IC7500 Main SoC AMP_MUTE SPDIF_OUT [ASPDIF0] SIDE_HP_MUTE Earphone [AL0_ADAC] HP_LOUT, HP_ROUT [AR0_ADAC] TPA6132A2 HEAD PHONE IC6100 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only...

This manual is also suitable for:

26ls3500

LG 26LS3500-JB Manual

Quick Links

Chapters

Related Manuals for LG 26LS3500-JB

Summary of Contents for LG 26LS3500-JB

This manual is also suitable for: