Changing Programme Parameters; Changing The Temperature - Miele G 7883 Operating Instructions Manual
Laboratory glassware washer
Hide thumbs
Also See for G 7883:
- Operating and installation instructions (80 pages) ,
- Operating instructions manual (68 pages) ,
- Operating instructions manual (65 pages)
Table of Contents
Advertisement
Programmable functions
Changing programme parameters
The parameters for the cleaning programmes can be changed to suit particular
requirements. For this purpose, the temperature and the temperature holding time
in the Main wash 1 and 2 and Final rinse 1 and 2 programme blocks can be
changed.
The programme chart at the end of these instructions shows the factory default
settings for the temperature and temperature holding time of the individual
programme blocks.
Please make a note of any changes in the appropriate section of the programme
chart.
The programme parameters in the Main wash 1 programme block of the
"Special" programme cannot be changed.
Values which can be set for the temperature:
– 30 °C -93 °C
Temperatures above 55 °C cause blood denaturation and possibly fixation.
In the "varioTD" programme, the correct requirements for infection protection
must be observed.
Values which can be set for the temperature holding time:
– 1-15 minutes.
Changing the temperature
Step
^ Press button 0 as often as necessary or hold
pressed in until the level of the programme block
you wish to change appears in the display.
^ Turn the programme selector to the programme you
wish to change, e.g. "Organica".
^ Press ß or hold pressed in until the required value
appears in the display, e.g. 70 °C.
42
in Programmes "Custom" to "Plastic" and varioTD
Display / Result
E09 for Main wash 1
E12 for Main wash 2
E22 for Final rinse 1
E25 for Final rinse 2
°C ~ 65
°C ~ 70
Hide quick links:
Advertisement
Table of Contents
