Page 1
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines P/NO : SAC30708020 (0801-REV01) for energy efficiency. www.lgusa.com / www.lg.ca / www.lgcommercial.com...
This reminder is provided to call the CATV system Do not attempt to modify this product in any way installer’s attention to Article 820-40 of the National without written authorization from LG Electronics. Electric Code (U.S.A.). The code provides guidelines for Unauthorized modification could void the user’s...
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus.
Page 5
Use only with the cart, stand, tripod, bracket, of the appliance, and have the cord replaced or table specified by the manufacturer, or sold with an exact replacement part by an authorized with the apparatus. When a cart is used, use servicer.
D-sub 15 pin Cable For P P lasma T T V m m odels Cable Management Clip For L L CD T T V m m odels (Only 32/37/42LG30, (Only 32LG30, 32LG50) (Only 32/37/42/47/52LG60) 37/42LG50) Bolts for stand assembly Screw for stand fixing...
PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your TV. ■ NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). Plasma TV Models Remote Control Sensor POWER Button...
Page 11
LCD TV Models 32/37/42/47/52LG30/50/70 CHANNEL ( Buttons Intelligent Sensor (Except 32/37/42LG30) Adjusts picture according to the surrounding VOLUME (+, -) conditions Buttons Power/Standby Indicator ENTER Illuminates red in standby mode. ENTER Button Illuminates blue when the set is switched on. MENU (Can be adjusted using Power I I ndicator in MENU Button...
PREPARATION BACK PANEL INFORMATION ■ Image shown may differ from your TV. Plasma TV Models 50/60PG30/60 ANTENNA/ CABLE IN RGB IN DIGITAL AUDIO OUT AUDIO REMOTE HDMI/DVI IN RGB(PC) CONTROL IN OPTICAL COAXIAL (RGB/DVI) RS-232C IN COMPONENT IN (CONTROL & SERVICE) AUDIO OUT AUDIO VIDEO...
Page 13
HDMI/DVI IN, HDMI IN AUDIO OUT Digital Connection. Analog audio output for use with amps and home theater systems. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to AV (Audio/Video) IN DVI cable (not included) Analog composite connection.
Page 14
PREPARATION ■ Image shown may differ from your TV. LCD TV Models 32/37/42LG30 ANTENNA/ CABLE IN RGB IN DIGITAL AUDIO OUT AUDIO REMOTE RGB(PC) OPTICAL CONTROL IN (RGB/DVI) HDMI/DVI IN RS-232C IN AUDIO OUT (CONTROL & SERVICE) AUDIO VIDEO VIDEO AUDIO S-VIDEO MONO...
Page 15
32/37/42/47/52LG60 1 (DVI) AUDIO DIGITAL AUDIO OUT (RGB/DVI) COAXIAL RGB(PC) OPTICAL ANTENNA/ CABLE IN RS-232C IN (CONTROL & SERVICE) AV IN REMOTE CONTROL IN HDMI/DVI IN, HDMI IN DIGITAL AUDIO OUT Digital Connection. Digital audio output for use with amps and home theater systems.
PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV. Only 32/37/42LG30, 37/42LG50 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the STAND B B ODY with COVER B B ASE of the TV.
Page 17
32/37/42/47/52LG60 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the STAND B B ODY with COVER B B ASE of the TV. STAND B B ODY COVER B B ASE Assemble the TV as shown.
PREPARATION CABLE MANAGEMENT ■ Image shown may differ from your TV. Plasma TV Models 50/60PG60 42/50PG20, 50/60PG30 Connect the cables as necessary. Connect the cables as necessary. To connect additional equipment, see the To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. EXTERNAL EQUIPMENT SETUP section.
Page 19
LCD TV Models 32/37/42/47/52LG30/50/70 32/37/42/47/52LG60 Connect the cables as necessary. Connect the cables as necessary. To connect additional equipment, see the To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT CLIP as Bundle the cables together using the supplied shown.
ATTACHING THE TV TO A DESK (Only 32LG30, 32LG50) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
This TV accepts VESA FDMI compliant mounts via the four screw holes on the back of the TV. These mounts are sold by third parties and not available from LG. Refer to the instructions included with the mount for more info.
PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING ■ You should purchase necessary components to prevent TV from falling off of the stand. ■ Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
To prevent damage do not connect to the power outlet until all connections are made between the devices. ■ ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket)
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
Page 25
32/37/42/47/52LG30/50/70, 50/60PG30/60 RGB IN DIGI AUDIO REMOTE RGB(PC) CONTROL IN (RGB/DVI) I/DVI IN RS-232 (CONTROL & AUDIO VIDEO S-VIDEO COMPONENT IN 32/37/42/47/52LG60 1 (DVI) AUDIO DIGITAL AUDIO OUT (RGB/DVI) COAXIAL RGB(PC) OPTICAL ANTENNA/ CABLE IN S-232C IN ROL & SERVICE) REMOTE NTROL IN...
Page 26
EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect Connect the digital set-top box to HDMI/DVI I I N1, 2, 3, or 4 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use Turn on the digital set-top box.
Page 27
32/37/42/47/52LG30/50/70, 50/60PG30/60 RGB IN RGB(PC) HDMI/DVI IN VIDEO COMPONENT HDMI-DTV OUTPUT 32/37/42/47/52LG60 1 (DVI) AUDIO DIGITAL AUDIO OUT (RGB/DVI) COAXIAL RGB(PC) OPTICAL ANTENNA/ CABLE IN RS-232C IN (CONTROL & SERVICE) REMOTE CONTROL IN HDMI-DTV OUTPUT...
Page 28
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection NOTE A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary. 32/37/42/47/52LG50, 50/60PG30/60 RGB IN AUDIO REMOTE RGB(PC) CONTROL IN (RGB/DVI) HDMI/DVI IN (CONT...
Page 29
32/37/42/47/52LG60 32/37/42/47/52LG30/70, 50/60PG30/60 RGB IN AUDIO REMOTE RGB(PC) 1 (DVI) CONTROL IN (RGB/DVI) AUDIO DIGITAL AUDIO OUT HDMI IN (RGB/DVI) (CON COAXIAL RGB(PC) OPTICAL AUDIO VIDEO ANTENNA/ HDMI/DVI IN COMPONENT IN CABLE IN RS-232C IN (CONTROL & SERVICE) REMOTE CONTROL IN DVI-DTV OUTPUT DVI-DTV OUTPUT 1.
EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect Connect the video outputs ( Y, P ) of the DVD to the COMPONENT I I N V V IDEO1 jacks on the TV. Match the jack colors ( Y = green, P = red ) .
Page 31
32/37/42/47/52LG30/50/70, 50/60PG30/60 RGB IN DIGITA AUDIO REMOTE RGB(PC) OPTICA CONTROL IN (RGB/DVI) DMI/DVI IN RS-232C I (CONTROL & SER AUDIO VIDEO S-VIDEO COMPONENT IN 32/37/42/47/52LG60 1 (DVI) AUDIO DIGITAL AUDIO OUT (RGB/DVI) COAXIAL RGB(PC) OPTICAL ANTENNA/ CABLE IN S-232C IN ROL &...
Page 32
EXTERNAL EQUIPMENT SETUP S-Video Connection (Except 32/37/42/47/52LG60) 32/37/42/47/52LG30/50/70, 50/60PG30/60 AUDIO S-VIDEO ANTENNA/ CABLE IN DIGITAL AUDIO OUT UDIO REMOTE OPTICAL COAXIAL CONTROL IN B/DVI) RS-232C IN AUDIO OUT (CONTROL & SERVICE) AUDIO S-VIDEO VIDEO (MONO) AUDIO 1. How to connect Connect the S-VIDEO output of the DVD to the S -VIDEO input on the TV.
Page 33
HDMI Connection 32/37/42/47/52LG30/50/70, 1. How to connect 50/60PG30/60 RGB(PC) (RGB/D Connect the HDMI output of the DVD to the HDMI/DVI I I N1, 2, 3 or 4 jack on the TV. HDMI/DVI IN No separate audio connection is necessary. HDMI supports both audio and video. VIDEO COMPONENT IN 2.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise ( interference ) , leave an adequate distance between the VCR and TV. ■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period ■...
Page 35
32/37/42/47/52LG30/50/70, Composite (RCA) Connection 50/60PG30/60 1. How to connect ANT IN S-VIDEO VIDEO Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) ANT OUT OUTPUT SWITCH 2.
Page 36
EXTERNAL EQUIPMENT SETUP S-Video Connection (Except 32/37/42/47/52LG60) 32/37/42/47/52LG30/50/70, 50/60PG30/60 ANT IN S-VIDEO VIDEO ANT OUT OUTPUT SWITCH ANTENNA/ CABLE IN DIGITAL AUDIO OUT AUDIO REMOTE OPTICAL COAXIAL CONTROL IN (RGB/DVI) RS-232C IN AUDIO OUT (CONTROL & SERVICE) AUDIO S-VIDEO VIDEO (MONO) AUDIO NT IN...
OTHER A/V SOURCE SETUP Camcorder 1. How to connect Video Game Set Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. ( Video = yellow, Audio Left = white, and VIDEO Audio Right = red ) 2.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 32/37/42/47/52LG30/50/70, 32/37/42/47/52LG60 42/50/60PG20/30/60 RGB IN AUDIO RGB(PC) 1 (DVI) (RGB/DVI) AUDIO DIGITAL AUDIO OUT (RGB/DVI) COAXIAL RGB(PC)
Page 39
DVI to HDMI Connection 32/37/42/47/52LG50, 50/60PG30/60 RGB IN AUDIO RGB(PC) (RGB/DVI) HDMI/DVI IN VIDEO AUDIO COMPONENT IN DVI-PC OUTPUT AUDIO 1. How to connect Connect the DVI output of the PC to the HDMI/DVI I I N 1 1 , 2 2 , 3 3 , or 4 jack on the TV. Connect the PC audio output to the AUDIO ( ( RGB/DVI) jack on the TV.
Page 40
EXTERNAL EQUIPMENT SETUP 32/37/42/47/52LG60 32/37/42/47/52LG30/70, 50/60PG30/60 RGB IN AUDIO RGB(PC) CONTR (RGB/DVI) HDMI IN 1 (DVI) AUDIO DIGITAL AUDIO OUT (RGB/DVI) COAXIAL VIDEO AUDIO HDMI/DVI IN COMPONENT IN RGB(PC) OPTICAL ANTENNA/ CABLE IN RS-232C IN (CONTROL & SERVICE) REMOTE CONTROL IN RGB OUTPUT AUDIO AUDIO...
Page 41
NOTES the resolution, vertical pattern, contrast or bright- 32/37/42/47LG30: To get the the best picture ness. If noise is present, change the PC output to quality, adjust the PC graphics card to 1360x768. another resolution, change the refresh rate to 37/42/47/52LG50: To get the the best picture another rate or adjust the brightness and contrast quality, adjust the PC graphics card to 1920x1080.
Page 42
EXTERNAL EQUIPMENT SETUP Supported Display Specifications (RGB-PC, HDMI-PC) NOTE Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. For 32/37/42LG30 For 37/42/47/52LG50,32/37/42/47/52LG60 32/42/47/52LG70 Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency ( KHz ) Frequency ( Hz ) Frequency ( KHz )
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. Position, Phase, and Size can also be adjusted. SCREEN Move Prev. MENU PICTURE Move Enter Resolution 1024 x 768 • Brightness 1280 x 768 •...
Page 45
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. PICTURE SCREEN Move Enter Move Prev. MENU •...
Page 46
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. PICTURE SCREEN Move Enter Move...
Page 47
Screen Reset (Reset to original factory values) Returns Position, Si ze, and Phase to the default factory settings. This feature operates only in RGB-PC mode. PICTURE SCREEN Move Enter Move Prev. MENU • Brightness Resolution • Sharpness Auto config. • Color •...
EXTERNAL EQUIPMENT SETUP USB CONNECTION (Except 37/42LG30) AV IN 2 1. How to connect Connect the USB device to the USB I I N jack on the side of TV. 2. How to use After connecting the USB I I N jack, you use the USB func- ■...
AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. Analog (32/37/42/47/52LG60) 1. How to connect RS-232C IN AUDIO OUT (CONTROL & SERVICE) Connect audio outputs to the TV’s AUDIO O O UT jacks. UDIO VIDEO L AUDIO...
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. POWER Turns your TV or any other programmed equipment on or INPUT Q.
Navigate the on-screen menus and adjust the system settings to your preference. THUMBSTICK (Up/Down/Left Right/ENTER) RETURN Allows the user to move return one step in an interactive application or other user interaction function. See a list of AV devices connected to TV. SIMPLINK When you toggle this button, the SIMPLINK menu appears at the screen.
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , INPUT, CH ( ( ■ button on the TV or press the POWER, INPUT, Number (0~9) button on the remote control.