13. TECHNICAL INFORMATION................. 23 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Put the cutlery in the cutlery basket with the sharp • ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door •...
Page 5
ENGLISH devices fitted (water meters, etc.), let • Dishwasher detergents are the water flow until it is clean and dangerous. Obey the safety clear. instructions on the detergent • Ensure that there are no visible water packaging. leaks during and after the first use of •...
3. PRODUCT DESCRIPTION Worktop Air vent Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate Cutlery drawer Salt container...
ENGLISH 4. CONTROL PANEL On/off button Start button Program button Indicators Programme indicators Option button Display Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. TimeManager indicator.
ENGLISH Water Energy Duration Programme (kWh) (min) 7 - 14 0.6 - 1.6 40 - 170 14 - 16 1.2 - 1.5 160 - 180 12.5-14.5 1.4-1.7 170-190 12 - 14 0.7 - 0.9 82-92 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
Page 10
It is important to set the good washing results. Water hardness German de‐ French de‐ mmol/l Clarke de‐ Water softener grees (°dH)
Page 11
ENGLISH • The indicators are off. • The indicator still flashes. • The display shows the current setting: = the rinse aid empty notification is activated (factory setting). 2. Press Option to change the setting. = the rinse aid empty notification is deactivated.
It is possible to save only 1 programme. How to set the MyFavourite A new setting cancels the previous one. programme How to save the MyFavourite Press and hold Program until the indicators that are related to the programme MyFavourite programme and options are 1.
ENGLISH 8. BEFORE FIRST USE 1. Make sure that the current level of 4. Remove the salt around the opening the water softener agrees with the of the salt container. hardness of the water supply. If not, adjust the level of the water softener.
4. Close the lid. Make sure that the lid If you use multi-tablets and locks into position. the drying performance is Fill the rinse aid dispenser satisfactory, the rinse aid when the indicator (A) refill indication can be becomes clear.
Page 15
ENGLISH 4. Set the applicable options. Cancelling the delay start while 5. Press Start to start the programme. the countdown operates • The washing phase indicator comes on . When you cancel the delay start you • The programme duration starts to have to set the programme and options decrease with steps of 1 minute.
10. HINTS AND TIPS 10.1 General • Do not use more than the correct quantity of detergent. Refer to the The following hints will ensure optimal instructions on the detergent cleaning and drying results in daily use packaging. and also help to protect the environment.
ENGLISH 10.5 Before starting a • The correct quantity of detergent is used. programme 10.6 Unloading the baskets Make sure that: • The filters are clean and correctly 1. Let the tableware cool down before installed. you remove it from the appliance. Hot •...
11.2 Cleaning the upper spray We recommend to clean regularly the upper spray arm to avoid soil to clog the holes. Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2. To disengage the spray arm from the...
ENGLISH 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you use short duration programmes regularly, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend running long duration programmes at least twice a month.
Page 20
Problem and alarm code Possible cause and solution The appliance does not fill • Make sure that the water tap is open. with water. • Make sure that the pressure of the water supply is not too low. For this information, contact your local The display shows water authority.
Page 21
ENGLISH Problem and alarm code Possible cause and solution The appliance trips the cir‐ • The amperage is insufficient to supply simultaneous‐ cuit-beaker. ly all the appliances in use. Check the socket amper‐ age and the capacity of the meter or turn off one of the appliances in use.
Page 22
Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature.
ENGLISH Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 850 / 610 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure bar (minimum and maximum) 0.5 - 8...