www.freeservicemanuals.info SECTION 1. GENERAL PART SERVICING PRECAUTIONS NOTES REGARDING HANDLING OF THE PICK-UP 1. Notes for transport and storage 1) The pick-up should always be left in its conductive bag until immediately prior to use. 2) The pick-up should never be subjected to external pressure or impact. Storage in conductive bag Drop impact 2.
Page 4
www.freeservicemanuals.info NOTES REGARDING COMPACT DISC PLAYER REPAIRS 1. Preparations 1) Compact disc players incorporate a great many ICs as well as the pick-up (laser diode). These components are sensitive to, and easily affected by, static electricity. If such static electricity is high voltage, components can be damaged, and for that reason components should be handled with care.
www.freeservicemanuals.info ESD PRECAUTIONS Electrostatically Sensitive Devices (ESD) Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated circuits and some field-effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity.
www.freeservicemanuals.info SPECIFICATIONS Power supply AC 220V,60Hz Power consumption Mass 4.6kg [General] External dimensions (W x H x D) 350mm Signal system NTSC Laser Semiconductor laser, wavelength 650nm Frequency range(audio) 4 Hz ~20 kHz [CD/DVD] Signal-to-noise ratio(audio) More than 75dB(1kHz,NOP,20kHz LPF/A-Filter) Dynamic range (audio) More than 75dB Harmonic distortion(audio)
www.freeservicemanuals.info LOCATION OF CUSTOMER CONTROLS FRONT PANEL STOP BUTTON SKIP/TUNE BUTTON PAUSE BUTTON PLAY BUTTON OPEN/CLOSE DISC TRAY MENU VOLUME POWER BUTTON FUNCTION PHONE (MONO/STERO) BUTTON CONTROLLER AND INDICATOR BUTTON CONNECTORs TITLE (FM/AM) BUTTON DISPLAY WINDOW SLEEP TUNED STEREO REPEAT PLAY BACK REC/RDS SOUND MODE INDICATOR...
www.freeservicemanuals.info SECTION 2. AUDIO PART ELECTRICAL TROUBLESHOOTING GUDIE Turn power on. Check power supply circuit. Is power on? Check laser circuit. Does initial read work? Check focus circuit. Check disc. Does it play? Check tracking servo circuit. Check audio circuit. Does it output audio? - 2-1 - Digitized in Heiloo Netherland...
Page 11
www.freeservicemanuals.info 2. AUDIO µ. COM Circuit POWER ON Does Video1/2 Does LOADING FM 87.5 appear appear at FLD? at FLD? Does it appear Does LOADING DVD Error at appear at FLD? FLD? Check Does no Dise or Connector(PN103)if Reconnet it. Time appear at FLD? is normally.
Page 12
www.freeservicemanuals.info 3. Front Circuit (1/2) POWER ON Check if the LED OFF. Reconnec it. PN101/PN102 is OK. Check if the Is digitron Refer to SMPS Part. Front power is on normally? OK(*1). Check if all Buttens are OK. Check if the Volume is Check if the Check if the...
Page 13
www.freeservicemanuals.info Front Circuit (2/2) Check Refer to Check if the if the Power part of the Refer to SMPS. power(SMPS). Power part of the Front is OK. Front is OK. Check if Check if R027~R036 PN101 PIN12, 13 Waverfrom Refer to Micom Replace R027~R036 Circuit Check if...
www.freeservicemanuals.info DVD PLAYER PROGRAM DOWNLOAD METHOD 1. DVD player without CD-RW option 1-1) Download the DVD program from your PC as following procedure ACTION FLD display • Plug the Power cord out • Connect the Fixture for download (Refer to Deck Mechanism Adjustment) •...
Page 15
*use file format: ISO9660 • Format the CD-RW Disc as below. Make the Folder name to “lg_dvd UPGRADE lg” under root folder lg_dvd_firmware upgrade • Download the source file in the folder (Ex, If the source file is “lg_a3_korea.bin, “lg_dvd...
www.freeservicemanuals.info WAVEFORMS OF MAJOR CHECK POINT 2V/Div. 2V/Div. 500nS/Div. 500nS/Div. • IC 208 pin • IC 208 pin • Serial data clock waveform during normal play. • Serial data output wavefrom during normal play. 2V/Div. 2V/Div. 500nS/Div. 500nS/Div. • IC 201 pin •...
Page 26
www.freeservicemanuals.info • FRONT & POWER SCHEMATIC DIAGRAM NOTE: Warning Parts that are shaded are critical With respect to risk of fire or electrical shock. 2-21 2-22 Digitized in Heiloo Netherland...
Page 27
www.freeservicemanuals.info • SMPS SCHEMATIC DIAGRAM NOTE: Warning Parts that are shaded are critical With respect to risk of fire or electrical shock. 2-23 2-24 Digitized in Heiloo Netherland...
Page 32
www.freeservicemanuals.info • POWER P.C. BOARD NOTE: Warning Parts that are shaded are critical With respect to risk of fire or electrical shock. 2-33 2-34 Digitized in Heiloo Netherland...
Page 33
www.freeservicemanuals.info MEMO MEMO Digitized in Heiloo Netherland...
www.freeservicemanuals.info SECTION 3. DVD PART ELECTRICAL TROUBLESHOOTING GUIDE 1. µ-COM Circuit A. No Power POWER ON Does CD/DVD appear at FLD? Is P5101 Does no DISC appear? connected normally? Reconnect it. Does Logo appear Check power on the screen? (Refer to power) If power is normal Is P5501 Pin8 normal?
Page 35
www.freeservicemanuals.info No disc .Power on Check loading Part. Push Pick-up to inner track to Does tray open or close? the end by hand. Does DECK assembly is defective. PMD03 Pin10 change (Limit sw) high to low? Pressing the open/close key repeatedly, check the voltage of IC2M1 check µ-COM Part.
Page 36
www.freeservicemanuals.info DISC IN OPEN/CLOSE Fig.3. FOCUS ERROR waveform Check Check IC2A1 Pins47,50,51,52 the focus error moving the FOCUS ON? lens up and down. in DVD Mode (IC2A1 Pin39) IC201 no output : Pick-up is defective. Does the level change at IC201 Replace IC201.
Page 37
www.freeservicemanuals.info CHECK A Fig.5. RF waveform Check RF Eye-Pattern. Check IC2A1 Pin3. No signal: Pick-up is defective RF : 1.5-1.6V(TP2A0) Does the sawtooth waveform emit Is the eye-pattern vivid? Does the 1.6V emit? Replace IC2A1. at IC2A1 Pin36? Replace IC201. Check IC201 Pin84.
Page 41
www.freeservicemanuals.info B. Audio abnoraml C. Video abnoraml AUDIO ABNORMAL VIDEO ABNORMAL Check Audio jack. Check Video jack. Check MPEG_CLK Signal Refer to Video part. of MPEG part. Refer to Audio part. Refer to MPEG part. Replace B/D. D. Open/Close abnormal OPEN/CLOSE ABNORMAL Check Front.
Page 42
www.freeservicemanuals.info E. Picture abnoraml PICTURE ABNORMAL Check the disc. Refer to Servo part Check MPEG_CLK Signal of MPEG part Check DSP Check MPEG Replace B/D F. Disc Error DISC ERROR Check Disc Refer to Servo part Replace B/D - 3-3 - Digitized in Heiloo Netherland...
Page 43
www.freeservicemanuals.info 2. MPEG Circuit Power is on Does Logo appear Check power & clock. on the screen? Does the Check CD/DVD DSP output moving picture of the DVD Disc Is MPEG data signal normal? play on the screen signal. normally? Check MPEG Decoder input signal.
Page 44
www.freeservicemanuals.info 3. RF/Servo Circuit CHECK POINT(General) Does signal goes "High" to IC201 Pin186 when the power is on? Does signal pulse Check "2.µ-COM Part". input to IC201 Pins53, 54 when the power is on? Does Does Replace X201 or IC206 TTL pulse output to 33.8688MHz clock input (33MHz clock defect)
Page 45
www.freeservicemanuals.info - 3-12 - Digitized in Heiloo Netherland...
Page 51
www.freeservicemanuals.info • CIRCUIT VOLTAGE CHART IC203 IC201 IC301 IC3F1 IC501 IC305 IC2A1 IC2M1 IC203 IC201 IC301 IC3F1 IC501 IC305 IC2A1 IC2M1 IC203 IC201 IC301 IC3F1 IC501 IC305 IC2A1 IC2M1 PIN STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY PIN STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY PIN STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY 3.18...
Page 52
www.freeservicemanuals.info IC901 IC451 IC401 IC454 IC453 IC452 IC402 IC801 IC503 IC502 IC2A4 IC2A2 IC206 IC504 IC506 PIN STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY PIN STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY STOP PLAY 2.98 2.98 5.51 5.51...
www.freeservicemanuals.info SECTION 4. MECHANSIM I DECK MECHANISM P ARTS LOCKATION • Top View(With Tray) Procedure Disass Fig- Parts Fixing Type embly Starting No. Holder 2 Screws, Bottom Clamp 2 Locking Tabs Bottom Clamp Assembly Disc 1, 2 Plate Clamp 1, 2, 3 Magnet Clamp 1, 2, 3, 4 Clamp Upper...
Page 57
www.freeservicemanuals.info I DECK MECHANISM DISASSEMBLY 1. Holder Clamp (Fig. 4-1) 2. Tray Disc (Fig. 4-2) 1) Release 1 Screws(S1). 1) Insert and push a Driver in the emergency eject 2) Unhook 2 Locking Tabs(L1). hole(A) at the right side, or put the Driver on the 3) Lift up the Holder Clamp and then separate it from the Lever(B) of the Gear Emergency and pull the Lever(A) Base Main.
Page 58
www.freeservicemanuals.info 3. Base Assembly Sled (Fig. 4-3) 3-2. Gear Middle 3-3. Gear Assembly Rack 1) Release 4 Screw(S2). 1) Release the Scerw(S3) 2) Disconnect the FFC Connector(C1) 3-1. Gear Assembly Feed 4. Rubber Rear (Fig. 4-3) 1) Unhook the Locking Tab(L2) in direction of arrow. - 4-3 - Digitized in Heiloo Netherland...
Page 59
www.freeservicemanuals.info 5. Frame Assembly Up/Down 8. Gear Loading (Fig. 4-4) 9. Guide Up/Down (Fig. 4-4) Note 1) Move the Guide Up/Down in direction of arrow(A) as Put the Base Main face down(Bottom Side) Fig.(A) 1) Release the Screw(S4) 2) Push the Locking Tab(L5) down and then lift up the 2) Unlock the Locking Tab(L3) in direction of arrow and Guide Up/Down to separate it from the Base Main.
www.freeservicemanuals.info SECTION 7. SPEAKER PART ELECTRICAL TROUBLESHOOTING GUIDE 1. RX all kinds of power check C245(+) DC5V Check SMPS board power DC5V Check 1. C281(+) DC3.3V Check 2. C246(+) DC3.0V Check 3. C257(+) DC1.8V Check 4. C288(+) DC2.7 Check 5. C250(+) DC2.7 Check 1.IC212 Soldering check and Replacement 2.IC206 Soldering check and Replacement 3.IC209 Soldering check and Replacement...
Page 63
www.freeservicemanuals.info 3. No sound perception • In case of TX, two RX speakers should be chcked with both them ON. TX ON , RX LEFT ON, RX RIGHT ON Check whether TX Relay get together or TX LED is ON. TX all kinds to power check IC104 3,5,7,9,23,24,26,28PIN power check Refer to TX all kinds to power check...
Page 64
www.freeservicemanuals.info • In Case of RX speaker, it should be checked with TX and the opposite RX speaker ON. TX ON , RX LEFT ON, RX RIGHT ON Check whether two RX relay get together or RX LED is turned ON. Move to C IC207 3,5,7,9,23,24,26,28PIN power check RX all kinds of power check...
Page 65
www.freeservicemanuals.info • IC202 Check C246 DC3V check Refer to RX kinds of power check C257 DC1.8V check Refer to RX kinds of power check IC202 66PIN CLK (16MHz) check IC202 Soldering check and Replacement When SW201 ON/OFF Q204 collector pin LOW fi HIGH check Q204 Soldering check and Replacement IC203 37PIN DC 3V check Refer to RX kinds of power check...
Page 66
www.freeservicemanuals.info • IC105 Check C140 DC3.3V check Refer to TX kinds of power check C147 DC1.8V check Refer to TX kinds of power check IC105 66PIN CLK (16MHz) check IC105 Soldering check and Replacement SW102 ON/OFF Q103 collector pin LOW fi HIGH check Q103 Soldering check and Replacement IC107 37PIN DC 3.3V check Refer to TX kinds of power check...
Page 67
www.freeservicemanuals.info Digitized in Heiloo Netherland...