Advertisement
HP PRO MFP M125 SERIES CF283A TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
REQUIRED SUPPLIES
1. New replacement toner for use in HP Pro M125
2. New replacement drum
3. Replacement chip (dedicated)
4. Wiper blade
5. Doctor blade
6. Magnetic roller
7. Sealing strip
8. Cotton swabs
9. Isopropyl alcohol
9. Drum padding powder
10. Conductive grease
REQUIRED TOOLS
1. Phillips head screwdriver
2. Small common screwdriver
3. Needle-nose pliers
4. Jeweler's screwdriver set
For a complete list of UniNet replacement toner and components available for this engine, click HERE, or visit our Website at
www.uninetimaging.com
1. With the handle facing you, remove the right-side screw and end cap from the cartridge.
Be careful of the drum cover spring! Remove it with the end cap.
© 2014 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
www.uninetimaging.com
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
