Table of Contents
Advertisement
Quick Links
Warning
W
arning
W
arning
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of suffi-
cient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the appli-
ance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electric
Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of the cable entry as prac-
tical.
REGULATORY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
CAUTION:
Do not attempt to modify this product in any way without written authorization.
Unauthorized modification could void the user's authority to operate this product.
1 Plasma TV
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Advertisement
Table of Contents
Related Manuals for LG RP-42PX20
Summary of Contents for LG RP-42PX20
- Page 1 Warning arning arning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
-
Page 2: Safety Instructions
Warning Safety Instructions Safety Instructions Safety instructions have two kinds of information, and each meaning of it is as below. The violation of this instruction may cause serious injuries and even death. WARNING The violation of this instruction may cause light injuries or damage of the NOTES product. - Page 3 Safety Instructions NOTE 1. Never touch the power plug with a wet hand. 8. Ensure the power cord doesn’t trail across any hot objects like a heater. This may cause an electric shock. This may cause a fire or an electric shock. 2.
-
Page 4: Table Of Contents
Safety Instructions Contents Contents Safety Instructions ......2~3 Auto Off / Sleep Timer ....23 Special Menu Features Introduction Key Lock . -
Page 5: Introduction
Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? A plasma display panel is the latest display technology and the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent lamps. -
Page 6: Controls
Introduction Controls Controls - This is a simplified representation of front panel. Here shown may be somewhat different from your TV. - This manual explains the features available on the RP-42PX10 TVs. Front Panel Controls Front Panel Controls ON/OFF TV/VIDEO MENU ON/OFF Button MENU Button... -
Page 7: Connection Options
Introduction Connection Options Connection Options S-VIDEO Input A connection available to provide better picture quality than the video input. VIDEO Input Connects the video signal from a video device. AUDIO Input Use to connect to hear stereo sound from an external device. Monitor Output Connect a second TV or Monitor. -
Page 8: Remote Control Key Functions
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. MUTE MUTE POWER POWER Switches the sound on or off. Turns your TV on or off. TVVIDEO TV/VIDEO MULTIMEDIA MTS Selects: TV, Video 1-2, Component... -
Page 9: Installation
Introduction Installation Installation Installation Instructions Installation Instructions • The TV can be installed in various ways such as on a wall, or on a desktop etc. • The TV is designed to be mounted horizontally. The speakers shown are optional. •... -
Page 10: External Equipment Connections
Installation Attaching the TV assembly to the wall Attaching the TV assembly to the wall - Secure the TV assembly by attaching it to a wall for additional support. • Install the TV brackets on the TV as shown. Insert the 2 bolts and tighten securely, in the upper holes on the bracket. -
Page 11: Vcr Setup / Cable Tv Setup
Installation NOTE: All cables shown are not included with the TV VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV - Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. -
Page 12: External A/V Source Setup
Installation External A/V Source Setup External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the COMPONENT MONITOR INPUT 2... -
Page 13: Dtv Setup / Monitor Out Setup
Installation DTV Setup DTV Setup - To watch digitally broadcast programs, purchase and connect a digital set-top box. COMPONENT MONITOR INPUT 2 OUTPUT COMPONENT Antenna INPUT 1 INPUT 1 S-VIDEO REMOTE RS-232C INPUT L/MONO DVI INPUT AUDIO INPUT RGB INPUT CONTROL (CONTROL/SERVICE) VIDEO... -
Page 14: Pc Setup
Installation PC Setup PC Setup How to connect 1. To get the best picture quality, adjust the PC graphics card to 640x 480, 60Hz. 2. Use the TV’s RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections, AUDIO INPUT VIDEO INPUT depending on your PC connector. -
Page 15: Operation
Operation Operation Operation urning the TV On urning the TV On * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. Turning on the TV just after installation 1. -
Page 16: Channel Menu Options
Operation Channel Menu Options Channel Menu Options Auto Program should be used to memorize all the active channels in your area before you are able to use the TV. There are two ways of storing channels in the TV's memory. You can use either. One is called AUTO PROGRAM and the other is called MANUAL PROGRAM. -
Page 17: Signal Reception Booster
Operation Signal Reception Booster Signal Reception Booster - If TV signal reception is poor because you are in a fringe area, set Booster to On. If the picture condition is good, set Booster to Off. - Adjustments for one channel don’t affect the adjustment for other channels. Set booster to on or off for each channel separately. -
Page 18: Picture Menu Options
Optimum Night time changed. - XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. CHANNEL - When selecting APC options (Daylight, Optimum and Night time), XD is auto- PICTURE matically change to On. -
Page 19: Fleshtone
Operation Fleshtone (TV ideo1-2, Component 1-2, RGB-DTV , and DVI-DTV Mode only) Fleshtone (TV ideo1-2, Component 1-2, RGB-DTV , and DVI-DTV Mode only) - Use Fleshtone to select the desired skin color option. CHANNEL PICTURE 1. Press the MENU button and then use D / E button to select the PICTURE... -
Page 20: Sound Menu Options
Operation Sound Menu Options Sound Menu Options DASP (Digital Auto Sound Processing) DASP (Digital Auto Sound Processing) - This function lets you enjoy the best sound without any special adjustment because the TV has the appropriate sound options based on the program content. - If you adjust sound options (Treble and Bass) manually, DASP automatically changes to 1. -
Page 21: Manual Sound Control (User Option)
Operation Manual Sound Control ( DASP off option and balance) Manual Sound Control ( option and balance) - You can adjust sound options Balance, Treble, and Bass to the levels you prefer. CHANNEL DASP Press the MENU button and then use button to select the SOUND menu. -
Page 22: Timer Menu Options
Operation imer Menu Options imer Menu Options Clock Setup Clock Setup - If current time setting is wrong, reset the clock manually. - - : CHANNEL Clock Off timer PICTURE 1. Press the MENU button and then use D / E button to select the TIMER menu. -
Page 23: Key Lock
Operation Special Menu Options Special Menu Options Key Lock Key Lock - The TV can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by locking out the front panel controls. - This TV is programmed to remember which option it was last set to even if you turn the TV off. -
Page 24: Low Power
Operation Special Menu Options continued Special Menu Options continued Low Power Low Power - Low power reduces the plasma display power consumption. CHANNEL Language Key lock 1. Press the MENU button and then use D / E button to select the SPECIAL menu. -
Page 25: Closed Captions
Operation Closed Captions Closed Captions Closed captioning is a process which converts the audio portion 1. Poor reception conditions are encountered: of a television program into written words which then appear as • IGNITION: subtitles on the television screen. Closed captions allow viewers Picture may flutter, drift, suffer from black to read the dialogue and narration of television programs. -
Page 26: Auto Adjustment
Operation Screen Menu Options Screen Menu Options Auto Auto Adjustment Adjustment - RGB (PC) mode only; This function doesn’t work for RGB-DTV mode. - Automatically adjusts picture position and minimizes image shaking. - After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. - The Auto config. -
Page 27: Manual Configure
Manual Configure (RGB-PC mode only) Manual Configure (RGB-PC mode only) - If the image still isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture Phase manually. CHANNEL Auto config. - To correct the screen size, adjust Clock PICTURE Position... -
Page 28: Luminance Noise Reduction
Screen Menu Options continued Screen Menu Options continued Luminance Noise Reduction (TV ideo 1-2 and Component 480i modes only) Luminance Noise Reduction (TV ideo 1-2 and Component 480i modes only) - Use YNR to reduce the picture noise that may appear on the screen. Screen adj. -
Page 29: Watching Pip/Double Window
Operation (Picture-In-Picture)/Double W indow Feature (Picture-In-Picture)/Double W indow Feature - PIP lets you view 2 different inputs pictures (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - Double Window mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. -
Page 30: External Control Device Setup
External Control Device Setup External Control Device Setup External Control Device Setup - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. - Connect the serial port of the control device to the RS-232C jack on the Monitor back panel. - RS-232C connection cables are not supplied with the Monitor. - Page 31 External Control Device Setup Set ID Set ID - Use this function to specify a monitor ID number. Language - Refer to ‘Real Data Mapping 1’. See page 32. CHANNEL Key lock PICTURE ISM Method 1. Press the MENU button and then use D / E button to select the SPECIAL...
- Page 32 External Control Device Setup 05. Volume Mute (Command2:e) 01. Power (Command2:a) G To control Power On/Off of the TV. G To control volume mute on/off. You can also adjust mute using the MUTE button on Transmission remote control. [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 0 : Power Off 1 : Power On...
- Page 33 External Control Device Setup 09. Color (Command2:i) 14. PIP / DW (Command2:n) G To control the PIP (Picture In picture)/DW (Double Window). G To adjust the screen color. You can also control the PIP/DW using the PIP/DW button You can also adjust color in the Picture menu. on the remote control or in the PIP/DW menu.
- Page 34 External Control Device Setup 18. Bass (Command2:s) 23. Blue Adjustment (Command2:$) G To adjust bass. G To adjust blue in color temperature. You can also adjust bass in the Sound menu. Transmission Transmission [k][$][ ][Set ID][ ][Data][Cr] [k][s][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 3C •...
-
Page 35: External Control Device Setup
External Control Device Setup 26. ISM Method (Command2:p) 31. Auto Configure (Command2:u) G To avoid having a fixed image remain on screen. G To adjust picture position and minimize image shaking Transmission automatically. It works only in RGB (PC) mode. [j][p][ ][Set ID][ ][Data][Cr] Transmission Data 0: Normal... -
Page 36: Ir Codes
IR Codes IR Codes IR Codes How to Connect How to Connect G Connect your wired remote control to the Remote Control port on the Monitor. Remote Control IR Code Remote Control IR Code G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Carrier frequency = 1/T Duty ratio = T1/T... - Page 37 IR Codes Code (Hexa) Function Note CH ( R/C Button CH ( R/C Button VOL ( R/C Button VOL ( R/C Button POWER R/C Button (Power On/Off) POWER ON Discrete IR Code (Only Power On) POWER OFF Discrete IR Code (Only Power Off) MUTE R/C Button Number Key 0...
-
Page 38: Troubleshooting Checklist
Troubleshooting Checklist roubleshooting Checklist roubleshooting Checklist • Check whether the TV is turned on. • Is the power cord inserted into wall power outlet? No picture & No sound • Test the wall power outlet, plug another product’s power cord into the outlet where the TV’s power cord was plugged in. -
Page 39: Product Specifications
Specification Product Specifications Product Specifications RP-42PX10/10H/20/20H RP-50PX10/10H/20/20H MODELS 48.4 / 1210 56 / 1400 Width (inches / mm) 27.6 / 701 30.4 / 761.5 Height (inches / mm) 11.4 / 290 11.4 / 290 Depth (inches / mm) 66 / 22.9 66 / 29.9 Weight (pounds / kg) 852 x 480 (Dot)