Table of Contents
Advertisement
Changing the door hinging
The appliance is supplied right-hand
hinged. If left-hand hinging is required,
the hinges must be changed.
Two people are needed for
changing the door hinging.
If a door seal is damaged the
door will not close properly and
cooling performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seal.
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
Place a suitable cover on the floor in
front of the appliance to protect the
appliance doors and your floor from
damage.
Remove the shelves/bottle shelf from
the appliance door.
70
Removing the door handles
When you pull the door handle , the
sidebar slides back.
Pull sidebar firmly to the back out
of the guides on the mounting plate.
Now loosen the four screws (TX15) in
the mounting plate and remove the
handle.
Remove the cover caps from the
opposite side, and fit them into the
empty holes.
Advertisement
Table of Contents
