Changing the door hinging
Removing the lower soft-close
mechanism
Open the lower door.
If a door seal is damaged the
door will not close properly and cool-
ing performance will be reduced.
Condensate will build up in the in-
terior and this can cause a build-up
of ice.
Do not damage the door seal.
Loosen panel from the soft-close
mechanism by inserting a flat-headed
screwdriver into the gaps from above
and, taking care, gradually lift the
panel off.
74
Push the panel toward the appli-
ance and leave it hanging there
between the door and appliance to
start with.
Place safety aid (supplied with the
appliance) on the soft-close mechan-
ism .
The safety aid prevents the hinge from
snapping shut.
Do not remove the red safety aid until
instructed to do so.
Use a flat-headed screwdriver to
carefully remove cover from the
side.