Building Under - Miele K 12010 S-2 Operating And Installation Instructions
Hide thumbs
Also See for K 12010 S-2:
- Operating and installation manual (48 pages) ,
- Operating and installation instructions (60 pages)
Table of Contents
Advertisement
Building under
The appliance can be pushed under a
worktop. If this is done, the appliance
lid has to removed.
If the ventilation gaps given are
not observed, the compressor will
run more frequently and for longer
periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
A ventilation gap of at least 140 cm
must be provided in the worktop.
If your appliance is supplied with wall
spacers these must not be used if the
appliance lid has been removed (see
"Installation").
With a building-under depth of 600
mm, any back mould on the worktop
must not exceed 10 mm in depth.
54
Make sure that the socket and on/off
switch are accessible after installa-
tion.
To remove the lid unscrew screws
from the back of the appliance.
2
Lift the appliance lid up at the back
and then pull it forwards to remove it.
- Quick Links:
- What to Do if
Hide quick links:
Advertisement
Table of Contents
