Now attach the covers onto the re-
taining clips on each side.
In the case of side-by-side installa-
tion, the covers are only required on
the outer side.
Fit the cover onto the light contact
switch.
Securing the plinth and plinth fascia
Click the plinth onto the bottom of
the appliance base.
Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the com-
pressor will run more frequently and
for longer periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.
Installation
53