Table of Contents
Advertisement
Cleaning and care
Cleaning the ice cube tray
Ice cubes freeze in the ice cube tray
and then drop into the ice cube drawer
below.
Clean the ice cube tray regularly with
hot water and a little washing-up liquid
to remove residual ice and water.
The ice cube tray cannot be removed
and must be cleaned in situ.
You should also clean the ice cube
maker before switching off the
appliance for a long time (e.g. when
going on holiday).
^ Switch the appliance on.
^ Open the ice cube drawer slightly.
^ Press the On/Off button a on the ice
cube maker. The indicator light will
come on.
^ Empty the ice cube drawer.
^ Press the On/Off button on the ice
cube maker for at least 12 seconds.
48
The indicator light flashes slowly at first
and then quickly.
^ Push the ice cube drawer in as far as
it will go within the next 60 seconds.
You will hear the ice cube tray turn so
that it is at an angle.
^ Wait until the ice cube tray has
completed this rotation before
continuing.
Now you can clean the ice cube tray:
^ Then take the ice cube drawer out of
the appliance and clean it.
^ Clean the ice cube tray b in the ice
cube maker.
After cleaning
^ Press the On/Off button on the ice
cube maker.
^ Push the drawer all the way back into
the appliance.
You will hear the ice cube tray return to
its original position.
The ice cube maker will begin to
produce ice cubes again after a
maximum of 6 hours.
Advertisement
Table of Contents
