HP ProLiant BL495c Generation 5 Installation Instructions
Processor option, server blades
Hide thumbs
Also See for ProLiant BL495c Generation 5:
- Installation instructions (3 pages) ,
- Quickspecs and dimenions (29 pages)
Advertisement
Quick Links
Processor Option
Installation Instructions
for HP ProLiant BL495c Generation 5 Server Blades
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 484106-001
July 2008 (First Edition)
Overview
This document provides instructions for installing a processor and
a heatsink.
Kit contents
Processor with installation tool
•
•
Heatsink
This document
•
Installing a processor
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION: To avoid damage to the system board:
Do not touch the processor socket contacts.
•
Always install the processor socket cover after
•
removing the processor from the socket.
•
Do not tilt or slide the processor when lowering the
processor into the socket.
CAUTION: To avoid damage to the processor:
•
Handle the processor only by the edges.
Do not touch the bottom of the processor, especially
•
the contact area.
CAUTION: To prevent possible server malfunction and
damage to the equipment, multiprocessor configurations
must contain processors with the same part number.
CAUTION: The heatsink thermal interface media is not
reusable and must be replaced if the heatsink is removed
from the processor after it has been installed.
IMPORTANT: Processor socket 1 must be populated at all
times or the server blade does not function.
To install a processor:
1.
Update the system ROM.
Locate and download the latest ROM version from the HP
website
(http://h18023.www1.hp.com/support/files/server/us/romfl
ash.html). Follow the instructions on the website to update the
system ROM.
2.
Power down the server blade.
3.
Remove the server blade.
4.
Remove the access panel.
Advertisement
Related Manuals for HP ProLiant BL495c Generation 5
Summary of Contents for HP ProLiant BL495c Generation 5
-
Page 1: Processor Option
Follow the instructions on the website to update the system ROM. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express Power down the server blade. warranty statements accompanying such products and services. Nothing Remove the server blade. - Page 2 Remove the heatsink blank. Retain the heatsink blank for IMPORTANT: Be sure the processor remains inside the future use. processor installation tool. If the processor has separated from the installation tool, carefully re-insert the processor in the tool. CAUTION: The pins on the processor socket are very fragile.
- Page 3 10. Press down firmly until the processor installation tool clicks and 13. Install the heatsink. Insert both screws, and then alternate separates from the processor, and then remove the processor tightening until the heatsink is seated properly. installation tool. 14. Install the access panel. 11.