To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact LG Service Helpline, or other independent service providers for advice. Removal of the battery will involve dismantling of the product case, disconnection of the electrical cables/contacts, and careful extraction of the battery cell using specialized tools.
12. LGH955 1) Disassemble Back cover Using nail, remove cover battery Procedure : A → B → C → D Start...
Page 59
12. LGH955 2) Disassemble battery cover 1) All Screw 11ea remove (Red side 9Point 3.5mm / Blue 4pt 3mm Screw) Screw should be separated 2) Right bottom side Rear first Rear Cover remove (Remove procedure : A B C D E) 3) Right bottom side Main Ant.
Page 60
12. LGH955 3) Disassemble PCBs and Connectors 1) Connector 10point remove Be cautious about Connector, FPCB, Chip damage Rear Cam. Conn. Front Cam. Conn. Lower FPCB Conn. Coaxial Cable (Left, Top) Bat. Conn. Coaxial Cable (Right, Top) Coaxial Cable Coaxial Cable (Right, Bottom) (Left, Bottom) 1.5mm Screw...
14. LGV735 Rear cover Disassemble Guide Disassemble Cover Rear’s I/O hook 2ea by pushing backward with tool 1. 2. Disassemble battery as above picture...
Page 66
14. LGV735 Battery Disassemble Guide 1. Disassemble screw 4ea 2. Disassemble battery as above picture which pointed to above picture. 3. Finish...
Page 67
14. LGV735 Main PCB Disassemble Guide 1. Disassemble screw 6ea 2. Disassemble connector 3ea which are front camera, motor which pointed to above picture. and LCD FPCB . 3. Disassemble PCB as above picture .Firstly, carefully lift up I/O area of PCB as 1 direction, and then, take out PCB as 2 direction.
Page 69
15. LGH791, LGH791F Cover Battery Remove ⑩ ⑨ ⑧ ⑦ ⑪ ⑫ ⑬ ⑥ ⑤ ⑭ ④ ⑮ ③ Battery cover Hook ①-2 ①-1 ② Start Disassemble procedure : A → B → C → D → E → F → G → H → I → J...
Page 70
15. LGH791, LGH791F Rear Cover Remove 1) All Screw 10ea remove (Red side 9Point 3.5mm) Screw should be separated 2) Right bottom side Main Ant. first Main Ant. remove (Remove procedure : A B) hook 3) Right side Rear Cover first Rear Cover remove (Remove procedure : C ...
4. HBS-500 Remove Remove screw. screw cap. Insert the tool to the edge, and then disassemble from left to right. Push edge (Jabara) Remove Remove bonding. battery wire.
7. HBS-750 Remove Remove screw cap. screw. Detach battery from Detach PCBA. case. Insert the tool to the edge, and then disassemble from left to right. Remove battery wire. Remove bonding.
8. HBS-760 Remove Remove Insert the tool to the edge, screw. screw cap. and then disassemble from right to left. Detach Remove bonding. PCBA. Remove battery wire.
9. HBS-800 Remove screw Remove screw. cap. Insert the tool to the edge, and then disassemble right to left. Insert the tool to the edge, Detach FPCBA. and then disassemble right to left. Remove battery wire.
10. HBS-900 * HBS-900 has 2 batterys at each parts (left / right). Insert the tool to the edge, and then disassemble from right to left.. Remove screw Remove screw. cap. Remove battery Detach PCBA. Detach connector. wire.
Page 93
10. HBS-900 * HBS-900 has 2 batterys at each parts (left / right). Insert the tool to the edge, and then Remove screw disassemble from right Remove screw. cap. to left.. Detach connector. Detach PCBA. Remove battery wire.
11. HBM-290 Insert the tool to the edge, and then Remove mic wire. disassemble from left to right. Insert the tool and detach PCBA. Remove battery wire.