hit counter code

Miele K 2601 Vi Operating And Installation Instructions page 100

Table of Contents

Advertisement

Frequently Asked Questions
Messages in the display
Message
The warning sounds
and the message
the door
appears on the
display.
The temperature display
is dark and the  sym-
bol is shown on the dis-
play.
"
F Please contact Miele
Technical Service.
pears in the display and
an alarm sounds.
 is shown in the dis-
play. The machine does
not get cold, but the
machine controls are
working.
100
Possible cause and solution
The appliance door is open.
Close
 Close the appliance door.
 If you wish to turn the alarm off early, touch the
sensor control OK on the display.
The alarm will stop.
The
Sabbath Mode
interior lighting is switched off and the refrigeration
appliance is cooling down.
 You can switch off Sabbath mode at any time (see
"Selecting additional settings – Switching
Mode
There is a fault.
" ap-
 Make a note of the fault message if necessary.
 Contact Technical Service.
 To turn the alarm off, touch the  symbol.
The error message does not disappear from the
display until the error has been rectified.
The voltage level is too high/low.
 Observe the connection data under "Electrical
connections".
 Contact Technical Service if necessary.
 To turn the alarm off, touch the  symbol.
The error message does not disappear from the
display until the error has been rectified.
Demo Mode
appliance to be presented in the showroom without
the cooling system being turned on. Do not activate
this setting for domestic use.
 Switch off Demo mode  (see "Selecting additional
settings", section "Switching off
  function is switched on. The
  on or off").
 is switched on. Demo mode allows the
Sabbath
").
Demo Mode

Advertisement

Table of Contents
loading

This manual is also suitable for:

K 2611 viK 2801 viK 2811 viK 2901 viK 2911 vi

Table of Contents