hit counter code
Download
Share
Print this page
Compaq 5000 Series End-User Replaceable Parts Program
  1. Manuals
  2. Brands
  3. Compaq Manuals
  4. Desktop
  5. 5000 Series
  6. End-user replaceable parts program
Compaq 5000 Series End-User Replaceable Parts Program

Compaq 5000 Series End-User Replaceable Parts Program

Replacing cd-rom, cd-rw and dvd drives
Hide thumbs Also See for 5000 Series:

Advertisement

Quick Links

Download this manual
Replacing CD-ROM, CD-RW and DVD Drives
5000 and 7000 Series
End-User Replaceable Parts Program

Advertisement

loading

Related Manuals for Compaq 5000 Series

Summary of Contents for Compaq 5000 Series

  • Page 1 Replacing CD-ROM, CD-RW and DVD Drives 5000 and 7000 Series End-User Replaceable Parts Program...
  • Page 3 All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice.
  • Page 4 Replacing CD- Introduction ROM, CD-RW, Your Compaq Internet PC has an Easy Access panel that and DVD Drives makes accessing the internal parts easy. This document describes how to remove and replace CD-ROM 1, CD-RW 2, and DVD drives 3 (see Figure 1-1). Your drives The CD-ROM, CD-RW, may not necessarily be installed in the order below.

  • Page 5: Tools Needed

    Compaq. Your replacement part is warranted for the longer of 90 days from the date the part was delivered to you, or the original One Year Limited Warranty that came with your Compaq Presario. Preparing Your Computer For Disassembly...

  • Page 6: Disconnecting The Power

    I. Disconnecting the Power 1. Turn off the computer using the Power button (see Figure 1-2). Figure 1-2 2. Disconnect the power cord from the electrical outlet 1 and computer 2 (see Figure 1-3). Failure to disconnect the power from the computer may result in personal injury.
  • Page 7 II. Opening the Side Access Panel 1. Remove the screw 1 securing the side access panel. Locate the latch 2 directly below the screw, press down, and hold in the down position (see Figure 2-1). You do not have to replace the screw securing the side access panel.
  • Page 8 III. Removing the Upper Front Panel and CD Storage Door (Lower Front Panel) 1. Locate the front panel door lock inside the chassis. The lock is located on the base of the lower 3.5” diskette drive cage inside the chassis (see Figure 3-1). 2.
  • Page 9 3. From the front of the system, press the indention 1 located on the CD Storage door (lower front panel) to open the lower door 2 (see Figure 3-2). Figure 3-2 CD-ROM, CD-RW, DVD D EPLACING RIVES...
  • Page 10 4. Locate the finger holes 1 under the bottom of the upper front panel and place your fingers in the holes. Pull the upper front panel forward until the top panel tabs 2 release from the slots on the chassis (see Figure 3-3). Figure 3-3 CD-ROM, CD-RW, DVD D...
  • Page 11 IV. Locating and Removing the CD-ROM, CD-RW, and DVD Drives 1. Locate the CD-ROM, CD-RW, or DVD Drive inside the chassis (see Figure 4-1). The drives can be identified by Steps 1 and 2 take place inside the CD icons located on the interior drive cage. the chassis.
  • Page 12 3. To release the drive, press in the side rails of the drive 1 while you pull the drive out of the chassis 2 (see Figure 4-3). Steps 3 and 4 are to be done outside the front of the chassis.
  • Page 13 V. Replacing the CD-ROM, CD-RW, and DVD Drives To replace the CD-ROM, CD-RW, and DVD drives, complete the following procedure: Note: Save all the packing materials received with your replacement drive. You will need them to return the defective part. 1.
  • Page 14 3. Connect the power cable 1 1 1 1 , data cable 2 2 2 2 , (and audio cable 3 3 3 3 if there is one) to the new drive (see Figure 5-3). Step 3 is done inside the computer chassis.
  • Page 15 VI. Replacing the Upper Front Panel and CD Storage Door (Lower Front Panel) 1. Place the upper front panel into the slots 1 at the top of chassis and gently snap the panel 2 into place (see Figure 6-1). Figure 6-1 CD-ROM, CD-RW, DVD D EPLACING...
  • Page 16 2. Close the CD Storage door (lower front panel) (see Figure 6-2). Figure 6-2 You do not have to replace the screw securing the side access panel. The screw securing the side panel is used for shipping purposes only. CD-ROM, CD-RW, DVD D EPLACING RIVES...
  • Page 17 VII. Replacing the Side Access Panel Align the tabs on the top and bottom of the side access panel with the slots (located on the top and bottom edge) of the chassis and slide the side access panel into place (see figure 7-1).
  • Page 18 2. Turn on the computer to verify that the replacement part is properly installed. 3. If the problem persists, repeat the Removing and Replacing procedures. 4. If you are still experiencing problems, contact Compaq Support: 1-800-984-9350. IX. Returning the Defective Part Please refer to the Compaq Part Return Instructions that came with your replacement part for instructions on returning the defective part.
  • Page 20 198677-001 www.compaq.com...

This manual is also suitable for:

7000 series