Limiting The Opening Angle Of The Appliance Door - Miele K 2601 Vi Operating And Installation Instructions
Hide thumbs
Also See for K 2601 Vi:
- Operating and installation instructions (116 pages) ,
- Manual (34 pages) ,
- Operating and installation instructions (108 pages)
Table of Contents
Advertisement
Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the compres-
sor will run more frequently and for
longer periods.
This causes increased energy con-
sumption and an increased com-
pressor operating temperature,
which can result in damage to the
compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
Do not block the ventilation gaps.
The ventilation gaps must never be
obstructed.
If necessary, cut the toe-kick cover to
the required length and height (cut
along the lower edge of the toe-kick
facing where it touches the floor).
Secure the toe-kick cover to the bot-
tom of the toe-kick ventilation grille.
Limiting the opening angle of the ap-
pliance door
The door hinges are set ex works to en-
able the appliance door to be opened
wide.
If, for example, the appliance door hits
an adjacent wall when it is opened, you
should limit the opening angle of the
appliance door to 90°.
Open the appliance door.
Insert the pin into the lower hinge
from above.
This will limit the opening angle of the
appliance door to 90°.
Installation
49
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
