Table of Contents
Advertisement
Appendix C
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Except where noted, all references to the HP E1413 apply to the HP E1313.
The following terms are either unique to Hewlett-Packard's VXIbus
modules or are unique to the HP E1413.
Automatic
The HP E1413 can execute a user defined sequence of up
to four Scan Lists, each of which can defining a sequence
Scan List
of up to 1024 channels to scan.
Sequencing
Control
The Digital Signal Processor chip that performs all of the
HP E1413's internal hardware control functions as well
Processor
as performing the EU Conversion process.
Continuous
Fastest scanning mode. In effect when
is set to
Mode
DSP
Same as Control Processor
EU
Engineering Units
EU Conversion
Engineering Unit Conversion: Converting binary A/D
readings into readings of voltage, resistance, temperature,
strain, or pressure.
Flash or
Non-volatile semiconductor memory used by the
HP E1413 to store its control firmware and calibration
Flash Memory
constants
List-of-Lists
Automatic Scan List Sequencing. The command
ROUT:SCAN LISTL
sequence of Scan Lists defined in the special Scan List
LISTL
.
Scan List
A user defined list of up to 1024 channel specifiers that
will be scanned when to module is triggered.
SCP
Signal Conditioning Plug-on: The HP E1413's internal
plug-on signal conditioners.
Terminal
The screw-terminal blocks you connect your system field
wiring to. The terminal blocks are inside the Terminal
Blocks
Module
IMM
and
INITiate:CONTinuous
causes the HP E1413 to execute a
Appendix C
Glossary
TRIGger:SOURce
is set to
ON
.
Glossary
331
Advertisement
Chapters
Table of Contents
