Table of Contents
Advertisement
Aligning the appliance
To align the appliance, adjust the
front feet using the spanner supplied.
Levelling the appliance door
Ensure that you unscrew the ad-
justable foot from the lower hinge
plate with the enclosed spanner until
it sits on the floor. Then unscrew the
foot by a further ¼ turn.
Installing the refrigeration appliance
in a run of kitchen units
Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the com-
SW19/10
pressor will run more frequently and
for longer periods. This will result in
increased energy consumption and a
higher operating temperature for the
compressor. This may, in turn, cause
damage to the compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.
Top box
Refrigeration appliance
Housing unit
Wall
Installation
95
Advertisement
Table of Contents
