Related Manuals for Philips 65BDL3552T
Summary of Contents for Philips 65BDL3552T
- Page 1 65BDL3552T 75BDL3552T 86BDL3552T V1.00 www.philips.com/welcome User Manual (English)
- Page 2 When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. •...
- Page 3 65BDL3552T/75BDL3552T/86BDL3552T If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your local service center. Stability Hazard The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the floor/wall in accordance with the installation instructions.
- Page 4 65BDL3552T/75BDL3552T/86BDL3552T Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device.
- Page 5 65BDL3552T/75BDL3552T/86BDL3552T Taiwan: 低功率電波輻射性電機管理辦法 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加 大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信 ； 經發現有干擾現象時， 應立即停用， 並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。應避免影響附近雷達系統之操作。 FCC/ISED/CE-RED Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
- Page 6 65BDL3552T/75BDL3552T/86BDL3552T Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source.
- Page 7 65BDL3552T/75BDL3552T/86BDL3552T Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse.
- Page 8 65BDL3552T/75BDL3552T/86BDL3552T China RoHS 根据中国大陆《电器电子产品有害物质限制使用管理办法》，以下部分列出了本产品中可能包含的有害 物质的名称和含量。 有害物质 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 外壳 液晶显示屏 电路板组件* 电源适配器 电源线/连接线 遥控器 本表格依据SJ/T 11364 的规定编制。 *: 电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路、连接器等。 O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572规定的限量要求以下。 X: 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。 上表中打 “X” 的部件， 应功能需要， 部分有害物质含量超出GB/T 26572规定的限量要求， 但符合欧盟...
- Page 9 65BDL3552T/75BDL3552T/86BDL3552T 限用物質及其化學符號 單元 鉛 汞 鎘 六價鉻 多溴聯苯 多溴二苯醚 (Pb) (Hg) (Cd) (PBB) (PBDE) 塑料外框 ○ ○ ○ ○ ○ ○ 後殼 ○ ○ ○ ○ ○ ○ 液晶面板 － ○ ○ ○ ○ ○ 電路板組件 － ○ ○ ○...
- Page 10 Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
- Page 11 65BDL3552T/75BDL3552T/86BDL3552T Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation.
-
Page 12: Table Of Contents
65BDL3552T/75BDL3552T/86BDL3552T Table Of Contents 4.4.1. OSD menu interaction with media player: ..........23 4.4.2. Media Player introduction: ....23 Unpacking and Installation ........1 4.5. CMND & Play ........... 27 1.1. Transportation and Unpacking ...... 1 4.6. Side Bar ............27 1.2. -
Page 13: Unpacking And Installation
65BDL3552T/75BDL3552T/86BDL3552T Unpacking and Installation 1.1. Transportation and Unpacking Notice for transportation • Always keep the carton in a vertical position. • Do NOT apply shock/vibration to the product. Do NOT place the carton in any other direction. • Do NOT place heavy objects on top of the •... - Page 14 65BDL3552T/75BDL3552T/86BDL3552T Notice for transportation 1. Remove the strap around the carton. 2. Use a blade to cut the tape on the top and open the carton. 3. Take out the cushions carefully. 4. Remove the plastic carton lockers and the top carton.
- Page 15 65BDL3552T/75BDL3552T/86BDL3552T 5. Take the display out of the carton box by two adults with both hands. • Do not touch the screen of display to avoid • Keep the display vertically when moving it. possible scratches. Move the display by holding the handles.
-
Page 16: Package Contents
DVI cable • Touch USB • Touch Pen Power Cord RS232 Cable RS232 Daisy IR Sensor Cable Chain Cable • Philips logo plate • Cleaning cloth • USB Cover Touch USB HDMI Cable DVI Cable Touch pen Philips logo Cleaning... -
Page 17: Mounting On A Wall
65BDL3552T/75BDL3552T/86BDL3552T 1.4. Mounting on a Wall To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that complied with TUV-GS and /or UL1678 standard in North America. - Page 18 65BDL3552T/75BDL3552T/86BDL3552T Caution: To prevent the display from falling: • For wall or ceiling mounting, we recommend that you install the display with metal brackets which are commercially available. For detailed instructions about the installation, refer to the guide provided with the bracket.
-
Page 19: Parts And Functions
65BDL3552T/75BDL3552T/86BDL3552T Parts and Functions 2.1. Control Panel ] button Remote control sensor and power status indicator • Receive command signals from the remote control. Turn the display On or turn the display to standby mode. • Indicate the operating status of the display:... -
Page 20: Input/Output Terminals
65BDL3552T/75BDL3552T/86BDL3552T 2.2. Input/Output Terminals 65BDL3552T AUDIO LINE USB 3.0 AUDIO LINE OUT AUDIO LINE IN USB 3.0 MICRO SD IR-OUT IR-IN RS232 RS232 RJ45 100-240V HDMI LOOP USB 3.0 C DP OUT HDMI OUT HDMI1 IN HDMI2 IN DP IN... - Page 21 65BDL3552T/75BDL3552T/86BDL3552T 75BDL3552T/86BDL3552T AUDIO LINE USB 3.0 AUDIO LINE OUT AUDIO LINE IN USB 3.0 MICRO SD IR-OUT IR-IN RS232 RS232 RJ45 100-240V HDMI LOOP USB 3.0 C DP IN DP OUT DVI-D OUT DVI-I IN HDMI OUT HDMI1 IN HDMI2 IN 50/60Hz 2.5A...
-
Page 22: Inserting The Batteries In The Remote Control
65BDL3552T/75BDL3552T/86BDL3552T 2.2.1. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace the batteries: 1. Press and then slide the cover to open it. 2. Insert the batteries with the correct polarity (+) and (–). -
Page 23: Remote Control
65BDL3552T/75BDL3552T/86BDL3552T 2.3. Remote Control NAVIGATION buttons 2.3.1. General functions Root Menu: Go to the OSD of Smart picture. Main Menu: Move the selected item up to make adjustment. IR Daisy Chain Menu: Increase the controlled Group ID number. Root Menu: Go to the OSD of Audio source. -
Page 24: Id Remote Control
65BDL3552T/75BDL3552T/86BDL3552T 2.3.2. ID Remote Control Press the [ID] button and the red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set remote control ID number when using several displays. ID Mode. The red LED lights up. -
Page 25: Remote Control Buttons On Android Source
4. All media files should be located in the folder of “philips”, under the root directory of the specified storage (internal/USB/SD Card). All sub-folders (video/ photo/music) are named by media types and shouldn’t be changed. - Page 26 65BDL3552T/75BDL3552T/86BDL3552T ] COLOR buttons Reserved. [Number/ ID SET/ ENTER] button ID SET and ENTER are reserved on Android source. These buttons are only controlled by Scalar. ] FORMAT button Change picture format. The button is only controlled by Scalar. ] BACK button Return to the previous page or exit from the previous function.
-
Page 27: Usb Cover
65BDL3552T/75BDL3552T/86BDL3552T 2.4. USB Cover ■ Plug in the USB device and insert the micro SD card. ■ Use the screw provided to fix the USB cover. Maximum suitable USB stick size: 20(W)x10(H)x80(L) mm... -
Page 28: Module
65BDL3552T/75BDL3552T/86BDL3552T 2.5. 4G Module 1. Please consult a professional technician to install the 4G module. 2. Power off the display. provided 3. Install the 4G module, fix it by using the M2 screws if necessary. 4. Connect the antenna to the 4G module. -
Page 29: Connecting External Equipment
65BDL3552T/75BDL3552T/86BDL3552T Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using HDMI video input DVD / VCR / VCD HDMI Out HDMI1 IN HDMI2 IN [HDMI IN] 3.2. Connecting a PC 3.2.1. Using DVI input [VGA AUDIO IN] Audio Out... -
Page 30: Connecting Audio Equipment
65BDL3552T/75BDL3552T/86BDL3552T 3.3. Connecting Audio Equipment 3.3.1. Connecting an external audio device Audio In [AUDIO OUT] SPEAKER SWITCH AUDIO OUT Stereo Amplifier AUDIO IN 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board. -
Page 31: Ir Connection
65BDL3552T/75BDL3552T/86BDL3552T 3.5. IR connection External IR Receiver DISPLAY 1 DISPLAY 2 [IR IN] [IR IN] [IR OUT] DISPLAY 1 DISPLAY 2 [RS-232 OUT] [RS-232 IN] NOTE: 1. The remote control sensor of this display will stop working if the [IR IN] is connected. -
Page 32: Touch Operation
65BDL3552T/75BDL3552T/86BDL3552T 3.7. Touch Operation Zoom in This display is equipped with a touch-sensitive screen and Touch the target on the screen with two fingertips holded supports the Windows Touch features either by singletouch together and move them apart to zoom in (magnify) the or multitouch operation. - Page 33 1. We highly recommend that you use the latest Service Pack with all Windows 7 OS. 2. Digitizer input to Windows refers to touch digitizer as opposed to touch stylus in tablet PCs. 3. Set as default by Microsoft. 4. Please visit the website www.philips.com/signagesolutions-support for the latest information about Mac OSX mode support.
-
Page 34: Operation
65BDL3552T/75BDL3552T/86BDL3552T Operation 2) Whiteboard page: NOTE: The control button described in this section is mainly on the remote control unless specified otherwise. 4.1. Watch the Connected Video Source 1. Press the [ ] SOURCE button. 2. Press [ ] or [ ] button to select a device, then press [ button. -
Page 35: Media Player
The pencil icon means the playlist is non-empty. Clear all 4. If an empty playlist is chosen, the app will guide you through selecting the media source. All media files should be placed in /philips/ of root directory. For example, videos in /philips/video/... - Page 36 65BDL3552T/75BDL3552T/86BDL3552T b a r . 5. If you select “USB” storage, the app will guide you 7.1 In the slidebar, the following functions are available: through selecting the USB device. - Select all: select all storage files. - Delete all: delete all playlist files.
- Page 37 65BDL3552T/75BDL3552T/86BDL3552T 10. After selecting the desired file, press “Play” key to play the media file immediately. 11. If you created a playlist with all image files, you will be asked to add a background music to the slideshow before saving.
- Page 38 Content : NOTE: If the playlist contains video and music files, the screen becomes black when playing music file. Step 2. Copy “mpplaylistX.txt” to “philips” folder of internal storage. You may use FTP to do this. File path : /storage/emulated/legacy/philips (for DL, PL) Ex.
-
Page 39: Cmnd & Play
65BDL3552T/75BDL3552T/86BDL3552T 4.5. CMND & Play 4.6. Side Bar 1) Server Setup CMND & Play server address 2) Account Setup CMND & Play account 3) PIN Code Setup CMND & Play PIN code (4) Version There are two options, Ver.2 and Ver.3 Ver. -
Page 40: Setting
65BDL3552T/75BDL3552T/86BDL3552T Setting B. Static IP Enter the IP address, Netmask, DNS address and Main items: gateway manually. (1)Network & internet Note: (2)Signage Display Input limitation of IP address, netmask, DNS (3)App & notifications address and gateway address (4)Display (1)Format: number 0-9, decimal point “.”... -
Page 41: Source Settings
A list of all available storage (internal storage/SD card/USB storage): 5.2.4.1 Clear Storage The purpose is to clear data in the folder “Philips”. It is divided into 4 modes: (1) Clear all Philips folders. (2) Clear the folder “Philips” from the internal storage only. - Page 42 65BDL3552T/75BDL3552T/86BDL3552T Import Signage Display Settings 5.2.4.3 Clone Data can be imported from the folder “Philips” of the This function allows you to copy the media files from the selected storage (USB storage or SD card). folder “Philips” of your source storage (internal, SD card or USB).
-
Page 43: App & Notifications
65BDL3552T/75BDL3552T/86BDL3552T 5.2.3.4 Admin Password Modify or enable/disable the admin password. 5.2.3.5 Swipe up Enable/disable up slide to turn on source menu. 5.3. App & notifications Display application information. Note: (1) User options key on RCU to show setting option. 5.6. -
Page 44: Osd Menu
65BDL3552T/75BDL3552T/86BDL3552T OSD Menu 6.2. OSD Menu Overview An overview of the On-Screen Display (OSD) structure 6.2.1. Picture menu is shown below. You can use it as a reference for further adjustment of your display. Picture Brightness 6.1. Navigating the OSD Menu... -
Page 45: Screen Menu
65BDL3552T/75BDL3552T/86BDL3552T The options are: {3000K} / {4000K} / {5000K} / {6500K} / Zoom mode {7500K} / {9300K} / {10000K} / {Native} / {User 1} / {User 2}. The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). The... -
Page 46: Audio Menu
65BDL3552T/75BDL3552T/86BDL3552T Auto Adjust • {Off} - Disable the function and Audio Out Volume will be grayed out. Press “Set” to detect and adjust H position, V position, Clock, Phase automatically. Speaker Setting NOTE: This item applies to VGA input only. -
Page 47: Advanced Menu
65BDL3552T/75BDL3552T/86BDL3552T 1~7: playlist number. < 63°C 63°C 76°C 78°C 8: MediaPlayer autoplay. Warning MSG No failover function, system will keep source even the PD Power Off source has no signal input. Choose to turn on or off the wake on LAN function. - Page 48 65BDL3552T/75BDL3552T/86BDL3552T • {Secondary} - Designate this display as the secondary HDMI with One Wire display. This display can not be operated by the remote CEC control. control, and will only receive the control signal from the • {Off} - Disable CEC.(Default) primary display via RS232C connection.
-
Page 49: Android Settings
65BDL3552T/75BDL3552T/86BDL3552T Language Advanced option reset Select the language used in the OSD menu. Reset all settings in the Advanced option menu to factory preset values. The options are: English/Deutsch/ 简体中文 /Français/ Italiano/Español/Pyccкий/Polski/Türkçe/ 繁體中文 / 日本語 1. Press [SET] or [ ] button to enter the submenu. -
Page 50: Supported Media Formats
65BDL3552T/75BDL3552T/86BDL3552T Supported Media Formats USB Multimedia Codec Formats Video Decode Type Video Codec Container Decode Encode Channel Remark MPEG program stream (.DAT, .VOB, .MPG, .MPEG) MPEG transport stream (.ts) Max Resolution: 1080P@60fps MPEG1/2 MPEG1/2 MP4 (.mp4) Max Bit Rats : 40Mbps AVI (.avi) - Page 51 65BDL3552T/75BDL3552T/86BDL3552T Image Decode Type Image Codec Photo Decode Encode Channel Remark Max Resolution: 7000 x 7000 JPEG JFIF file format 1.02 File Format: JPG, JPEG The limitation of max resolution depends on DRAM Max Resolution: 15360 x 8640 File Format: BMP...
-
Page 52: Input Mode
65BDL3552T/75BDL3552T/86BDL3552T Input Mode VGA/DVI timing support: Item Mode Resolution H.Freq. (KHz) V.Freq. (Hz) IBM VGA 10H 640x350 31.469 70.086 IBM VGA 12H 640x480 31.469 59.94 MACINTOSH 640x480 66.67 VESA 640x480 37.861 72.809 VESA 640x480 37.5 IBM VGA 3H 720x400 31.469 70.087... - Page 53 65BDL3552T/75BDL3552T/86BDL3552T 4K2K Item Resolution H.Freq. (KHz) V.Freq. (Hz) 3840x2160 53.946 23.900 3840x2160 24.000 3840x2160 56.25 25.000 3840x2160 67.432 29.900 3840x2160 67.5 30.000 3840x2160 112.5 50.000 3840x2160 60.000 Video Timing support(HDMI/DVD HD/DVI) Item Mode Resolution Comment 60Hz 480i except DVI 480p...
-
Page 54: Pixel Defect Policy
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. -
Page 55: Dark Dot Defects
9.6. Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table. -
Page 56: Cleaning And Troubleshooting
65BDL3552T/75BDL3552T/86BDL3552T Cleaning and Troubleshooting 10.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close. -
Page 57: Troubleshooting
65BDL3552T/75BDL3552T/86BDL3552T 10.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back 2. Make sure that the power switch is of the display is not switched on. - Page 58 65BDL3552T/75BDL3552T/86BDL3552T How to setup the settings in the menu to Daisy chained by RS232 and no IR cable 1. The first display sets as “Primary” on control all the monitors at the same time OSD (Advanced option/IR control item), and individually via RC? others set as “Secondary”.
-
Page 59: Technical Specifications
65BDL3552T/75BDL3552T/86BDL3552T Technical Specifications Display: Specifications Item 65BDL3552T 75BDL3552T 86BDL3552T Screen Size (Active Area) 163.9 cm / 64.5 inches 189.3 cm / 74.5 inches 217.4 cm / 85.6 inches Aspect Ratio 16:9 16:9 16:9 Number of pixels 3840 (H) x 2160 (V) - Page 60 65BDL3552T/75BDL3552T/86BDL3552T General: Specifications Item 65BDL3552T 75BDL3552T 86BDL3552T Power Input 100 - 240V~, 50/60Hz 100 - 240V~, 50/60Hz 100 - 240V~, 50/60Hz Power Consumption (Max) 350 W 380 W 650 W Power Consumption (typ.) 175 W 190 W 390 W Power Consumption (Standby Mode & Off <0.5 W...
- Page 61 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.