Problem
Neither milk nor milk
froth comes out of the
main dispenser.
Empty the drip tray and the
appears
waste container
in the display, even
though the drip tray has
been emptied.
Insert the drip tray and the
waste container
appears
in the display even
though both are in-
stalled.
Frequently Asked Questions
Possible cause and solution
The milk pipework was connected incorrectly to the
main dispenser.
The seam on the milk pipework, main dispenser, and
on the rinse valve makes it easier to assemble.
Check whether the milk pipework is correctly
connected to the main dispenser.
The milk pipework is blocked.
Clean the main dispenser and milk pipework
carefully with the brush.
This is not a fault. The drip tray was not properly
removed and/or replaced too quickly.
The drip tray is not correctly installed and is therefore
not detected.
Empty the drip tray and grounds container.
Reassemble all parts and push the drip tray back
as far as it will go in the coffee machine.
73