Connection To The Water Inlet - Miele KFNS 37692 iDE Operating And Installation Instructions
Fridge-freezer combination
Hide thumbs
Also See for KFNS 37692 iDE:
- Operating and installation instructions (112 pages) ,
- Operating and installation instructions (112 pages) ,
- Operating and installation instructions (112 pages)
Table of Contents
Advertisement
Mains water connection
The stainless steel hose is 1.5 m long.
An extension of the stainless steel hose
is not permitted.
Replace the stainless steel hose if it
is defective. It must only be replaced
by an original Miele hose (available
from Miele). Please note that this
hose is suitable for conveying
drinking water.
A tap must be provided between the
stainless steel hose and the household
water supply to ensure that the water
supply can be disconnected if
necessary.
The tap should be easily accessible
after the machine has been built in.
82
Connection to the water inlet
Before making plumbing
connections, ensure the appliance
is disconnected from the mains
electricity supply.
Connection to the mains water supply
should incorporate a mains tap with a
" thread.
4
^ Connect the straight end of the
stainless steel hose to the tap.
Ensure that it is screwed into
position correctly.
Before using the appliance for the first
time, the water pipes should be purged
of air by a qualified and competent
person:
– To do so, the stainless steel hose
should be filled with as much water
as possible before being connected
to the solenoid valve.
– Mop up any spillages with a cloth.
3
/
Advertisement
Table of Contents
