Miele KM 3034 Operating And Installation Instructions page 37
Hide thumbs
Also See for KM 3034:
- Operating and installation instructions (60 pages) ,
- Operating and installation instructions (56 pages) ,
- Operating and installation instructions (64 pages)
Table of Contents
Advertisement
Problem
Letters appear in the
minute minder display.
The in-operation/
residual heat indicators
are flashing and a
combination of letters
and numbers appears in
the minute minder
display.
Possible cause and remedy
The system lock has been activated.
You need to deactivate the system lock (see
"System lock").
A sensor fault has occurred.
Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the
cooktop. The area surrounding the cooktop must
not be too dark.
Make sure that there is nothing covering the
sensors or the cooktop. Take any pans off the
cooktop and wipe away any food deposits.
Interrupt the power supply to the cooktop for
approx. 1 minute.
If the problem persists after power is restored,
please contact Miele.
The overheating protection mechanism has been
activated.
Turn all the control knobs clockwise to "". You
can operate the cooking zones again once has
disappeared.
There is a fault with the electronics.
Reset: Touch the easy switch-off function sensor
for three seconds.
If this fault message continues to appear in the
display, contact Miele.
All other faults
There is a fault with the electronics.
Interrupt the power supply to the cooktop for
approx. 1 minute.
If the problem persists after power is restored,
please contact Miele.
Problem solving guide
37
- Quick Links:
- System Lock
- Problem Solving Guide
Hide quick links:
Advertisement
Table of Contents
