Page 1
Operating instructions Washing machine To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr. 10 874 781...
Contents Caring for the environment .................. 6 Warning and Safety instructions ................. 7 Operating the washing machine ................ 14 Control panel ......................14 Display........................16 Examples on how to operate the appliance ............16 Before using for the first time ................ 17 1.
Page 3
Detergent ...................... 46 The correct detergent.................... 46 Detergent dispensing aids..................46 Fabric softeners and liquid starch ................. 46 Miele recommended detergents ................48 Cleaning and care .................... 50 Cleaning the drum (Hygiene info) ................50 External casing and fascia panel................50 Cleaning the detergent dispenser drawer .............
Page 4
Screwing out and adjusting the feet.............. 69 Building under a continuous worktop / in a kitchen run........ 70 Washer and dryer stack ................... 70 The Miele water protection system ............... 71 Connection to the water supply ................72 Drainage ........................ 73 Electrical connection ....................
Page 5
Contents Settings ........................ 78 Calling up settings....................78 Selecting settings ....................78 Changing a setting ....................78 Closing the settings menu..................78 Language ......................79 Buzzer volume....................... 79 Keypad tone ......................79 Welcome tone ....................... 79 Code........................80 Units ........................80 Brightness ......................
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
It must only be used to wash garments which have been declared suitable for washing by the manufacturer indicated on the garment care label. Any other use is not permitted. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
Page 8
Warning and Safety instructions Safety with children Young children must not be allowed to use this appliance. Older children may only use the appliance when its operation has been clearly explained to them and they are able to use it safely, recognising the dangers of misuse.
Page 9
Faulty components must only be replaced by genuine Miele spare parts. Miele can only guarantee the safety of the appliance when Miele replacement parts are used. The electrical socket must be easily accessible after installation so that the machine can be disconnected from the electricity supply if necessary.
Page 10
(e.g. on a ship). Do not make any alterations to the machine, unless authorised to do so by Miele. In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the machine and its surroundings in a clean condition at all times.
Page 11
Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
Page 12
Miele recommends using Miele descaler for washing machines which is available to order online at shop.miele.com (depending on country) or from Miele. Strictly observe the instructions on the packaging.
Page 13
Miele cannot accept liability. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the washing machine Control panel a Control panel d OK sensor The control field consists of a Confirm selected values with the OK display and various sensor controls. sensor. The individual sensors are explained e PowerWash display with the Quick in the following sections.
Page 15
Operating the washing machine f Optical interface j Start/Stop sensor For service technicians. Touching the Start/Stop sensor starts the selected programme or g Sensor controls for Extras cancels a programme that has You can supplement wash already been started. The sensor programmes with Extras.
Operating the washing machine Setting numerical values Display The standard display shows the Start in following from left to right: The numerical value is highlighted in 2:59 1400 white. Touching the sensor ...
Before using for the first time Remove the elbow piece. Before using the machine for the first time, ensure that it is correctly installed and connected. See “Installation and connection”. Also check that the filters are securely tightened to prevent the risk of water leaks during use.
Before using for the first time The calibration programme is started. It 2. Removing the transit bars will take approximately 2 hours. Failure to remove the transit bars At the end of the programme the can result in damage to the washing following message will appear in the machine and to adjacent cabinetry or display:...
– Washing at low temperatures and/or using liquid detergents can cause bacteria and odours to build up in the washing machine. Miele therefore recommends cleaning the washing machine once every month. The washing machine reminds you to...
1. Preparing the laundry Useful tip: Stains can be pre-treated using some handy tricks, which can be found in “Miele's guide to laundry care”. Please contact Miele to obtain a copy of this booklet. Solvent-based cleaners (e.g. one containing benzine) can damage plastic parts.
2. Selecting a programme 2. Selecting further programmes via Switching on the washing the “Further programmes/” machine position and the display: Turn the programme selector to a programme. Programme selection 1. Selecting standard programmes via the programme selector Turn the programme selector to the Further programmes/...
3. Loading the washing machine Opening the door Closing the door Reach under the door grip and pull Make sure that no items are caught the door open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry.
4. Selecting programme settings PowerWash display with the Quick Quick and Eco sensor controls Cottons If the PowerWash indicator lights up Cottons – when you select a wash programme, you can choose between three Cottons – programme sequences. The wash result Minimum iron remains the same.
4. Selecting programme settings Extras sensor control Selecting a temperature/spin speed You can select additional Extras using the Extras sensor. You can alter the preset temperature/ Touch the Extras sensor. spin speed of a wash programme, if this option is permitted for that The following appears in the display: programme.
4. Selecting programme settings Delay start Cancelling Delay start The selected Delay start time can be With Delay start you can delay the cancelled before the programme starts. start of the programme. Touch the sensor. The hours can be set from The selected Delay start time will The minutes can be set in 15-minute appear in the display.
5. Adding detergent There are several options for adding Adding fabric softener detergent. Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used with this appliance. Please observe the instructions for use and dosage on the detergent packaging. Filling with detergent ...
Page 27
5. Adding detergent Tips on dosing Using liquid detergent with a pre- wash Adjust the detergent dosage to the level of soiling of the laundry and the size of Liquid detergent cannot be used for the the load. Reduce the amount of main wash if the pre-wash has been detergent with smaller loads (e.g.
You can order the capsules online at Open the lid of the / shop.miele.com (depending on country) compartment. or from Miele (see the end of this booklet for contact details). Keep capsules out of the reach of children.
Page 29
5. Adding detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. No additional fabric softener may be added to the compartment when using a capsule.
6. Starting the programme - the end of the programme Starting a programme Items left in the drum could discolour other items in the next wash or Touch the flashing Start/Stop sensor. become discoloured themselves. The door will lock ( will appear in the Check that all items have been display to show this) and the removed from the drum.
Spinning Final spin speed in the Omitting the final spin (Rinse programme hold) When a programme is selected, the If Rinse hold is selected, the laundry optimum spin speed for this wash remains in the water following the final programme will appear in the display. rinse cycle.
Programme chart Programmes on the programme selector Cottons Cold to 90°C Max. load 8.0 kg Items Cottons, linens or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Note Where particularly high levels of hygiene are required, please select a temperature of 90°C.
Page 33
Programme chart Delicates Cold to 60°C Max. load 3.0 kg Items Delicate garments made from synthetic fibre, mixed fibre, rayon and viscose. Curtains, including net curtains, specified as machine-washable by the manufacturer. Note – Dust in curtains usually means that a programme with pre-wash is advisable.
Page 34
Programme chart Darks / Denim Cold to 60°C Max. load 3.0 kg Items Black and dark garments made from cotton, mixed fibres and denim. Notes – Wash inside out. – Denim often contains excess dye and may run during the first few washes.
Page 35
Programme chart Programmes accessed via Further programmes/ on the programme selector Express 20 Cold to 40°C Max. load 3.5 kg Items Cotton garments that have hardly been worn or are only very lightly soiled. Note The Short Extra is activated automatically. Sportswear Cold to 60°C Max.
Page 36
Cleaning the washing machine will significantly reduce bacteria, mould, and biofilm and prevent the build-up of unpleasant odours. Note – Optimum results can be achieved by using the Miele IntenseClean machine cleaner. Alternatively, a universal powder detergent can be used.
Extras You can use the Extra option sensors to SingleWash augment the wash programmes. For efficiently washing a very small load (< 1 kg) in a normal wash programme. Selecting Extras The wash duration is reduced. Extras are selected or deselected using Please note the following advice: the sensors in the control field.
Extras Soak Additional Extras can be selected using the “Extras” For heavily soiled and stained items with protein stains. sensor control A duration of between 30 minutes and Selecting Extras in the display 6 hours can be chosen for the soak Touch the Extras sensor. process in 30-minute increments.
Extras Wash programme chart - Extras These Extras cannot be selected with programmes which are not listed in the chart below. Cottons Minimum iron Delicates – Woollens – – – – – – – Silks – – – –...
Page 41
Programme sequence Special features in the = low water level programme sequence = medium water level Anti-crease: = high water level At the end of the programme the drum = intensive rhythm continues to turn at intervals for up to 30 minutes to help prevent creasing.
PowerWash 2.0 not be lower than 600 rpm. PowerWash 2.0, a washing technique – CapDosing (, ) ) has not been developed by Miele, is activated in the selected for the main wash. following programmes with small and medium-sized loads: With some options (e.g. Pre-wash, –...
Changing the programme sequence Cancelling a programme Interrupting a programme Turn the programme selector to the You can cancel a programme at any position. time after it has started. Touch the Start/Stop sensor. The washing machine switches off. ...
Changing the programme sequence Safety lock Adding or removing laundry Locking the machine prevents a wash Laundry can only be added or programme being cancelled by removed at the beginning of a wash mistake. programme. If the message to add laundry is not Activating the safety lock visible in the display, then it is no ...
Garment care label symbols Washing Drying The figure quoted in the symbol is the The number of dots indicates the maximum temperature at which the drying temperature. garment can be washed. The number Normal temperature of bars under the symbol indicates the level of agitation permitted.
Detergent The correct detergent Detergent dispensing aids All detergents produced for automatic Use dispensing aids (e.g. balls) if these front loading washing machines are are supplied with the detergent, suitable. Follow the manufacturer's particularly when using liquid detergent. instructions and dosage Refill packs of detergent recommendations on the packaging.
Page 47
Detergent Adding fabric softener or liquid Colour run and dye removers/ starch separately dyes Prepare the starch in accordance with Colour run and dye removers the manufacturer's instructions on the can cause corrosion in the washing packaging. machine. Useful tip: When adding fabric Do not use colour run or dye softener, activate the Water + Extra.
Detergent Miele recommended detergents Miele detergents and care products have been specially designed for Miele washing machines. They are available to order via the internet at shop.miele.com (depending on country) or from Miele. Miele Miele Miele Miele Miele Cap ...
Page 49
Detergent The recommendations apply to the temperature ranges given in the Programme chart. Universal Colour Delicates and Special woollens detergent Cottons – – Minimum iron – – – Delicates – – – Woollens –...
Cleaning and care Cleaning the drum Cleaning the detergent (Hygiene info) dispenser drawer Washing at low temperatures and/or Washing at low temperatures and the using liquid detergents can cause use of liquid detergent can lead to a bacteria and odours to build up in the build-up of mould and bacteria in the washing machine.
Page 51
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times.
Cleaning and care Cleaning the filter in the water inlet Cleaning the water inlet filter valve The washing machine has two filters to Using pliers, carefully loosen the protect the water inlet valve. These ribbed plastic nut (seal) on the inlet filters should be checked every six valve and unscrew.
Miele. This will save you time and money because you will not need a service call. If, after reading this guide, you cannot remedy the problem yourself, please call Miele (see back cover for details).
Then switch the washing machine on again. Restart the programme. If the fault message appears again, contact Miele. To switch off the fault message: Turn the programme selector to the position and switch the washing machine off.
“Installation and connection – Levelling the machine”. Check whether the maximum delivery head of 1 m has been exceeded. If the fault message appears again, contact Miele. The washing machine can still be used, however without the Pre-ironing Extra.
Page 56
Remove the fluff with your finger. Do not use any sharp or pointed tools to do this. Restart the programme after cleaning. If the fault message appears again, contact Miele. The washing machine can still be used but with reduced functionality.
In order to prevent bacteria and unpleasant odours building up in the machine, run the Clean machine programme using the Miele IntenseClean washing machine cleaner or powder detergent. The detergent dispenser drawer was left closed after washing.
Page 58
Problem solving guide General problems with the washing machine Problem Possible cause and remedy Large amounts of The water pressure is too low. detergent residue Clean the water inlet filter. remain in the detergent Please note that the water pressure must be at dispenser drawer.
Use more detergent or liquid detergent. Before washing the next load, run the Clean machine programme using the Miele IntenseClean washing machine cleaner or a powder detergent. White residues which...
Wait until the temperature in the drum has been cancelled. decreased and the message has gone out in the display. The following appears The door lock has jammed. in the display: Call Miele. Service Door release fault F35...
Problem solving guide Opening the door in the event of a blocked drain outlet and/ or power cut Switch off the washing machine. Slowly unscrew the filters until water runs out. Be careful not to release too much water at once. If the flow of water is too strong, some water can seep into the machine base and activate the water protection float...
Page 62
Problem solving guide Opening the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Danger of injury! Always make sure that the drum is stationary before reaching in to remove laundry. Clean the filters thoroughly. ...
Optional spare parts and accessories cannot remedy yourself, please contact for this washing machine are available Miele. from Miele. Contact information for Miele can be Warranty found at the end of this booklet. The manufacturer's warranty for this appliance is 2 years.
Installation and connection Front view a Inlet hose (tested to withstand e Detergent dispenser drawer pressures up to 7000 kPa) f Door b Electrical connection g Access to filters, pumps and c Flexible drain hose (with detachable emergency release swivel elbow) h Four height-adjustable feet d Control panel...
Installation and connection Rear view a Drain hose e Inlet hose (tested to withstand pressures up to 7000 kPa) b Transport clips for inlet and drain f Safety caps for transit bars hoses and mains connection cable c Electrical connection g Transport clips for inlet and drain hoses and for storing transit bars d Protruding lid for holding when when not in use...
Installation and connection Installation surface Transporting the washing machine to its installation site A concrete floor is the most suitable installation surface for a washing Make sure the fixings at the back machine, being far less prone to of the lid are secure. vibration during the spin cycle than Otherwise there is a danger of the lid wooden floorboards or a carpeted...
Page 67
Installation and connection Using the spanner supplied, turn the Turn the right-hand transit bar 90°, left-hand transit bar 90°, then then withdraw the transit bar. withdraw the transit bar.
Installation and connection To avoid the risk of injury, the holes for the transit bars must be covered after the transit bars have been removed. Secure the transit bars to the back of the washing machine. Make sure the top catch is located above the holder.
Installation and connection Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine.
Installation and connection Building under a continuous Washer and dryer stack worktop / in a kitchen run A Miele tumble dryer can be stacked with the washing machine. The The washing machine lid cannot appropriate “WTV” stacking kit* to be removed.
The Miele water protection housing system – Sump: Any leaking water is collected The Miele water protection system in a sump in the base of the machine. protects all parts of the washing A float switches off the water inlet...
Installation and connection Maintenance Connection to the water supply Only use a genuine Miele hose should The washing machine should be you ever need a replacement. These are connected to a mains water supply in tested to withstand pressures up to accordance with current local and 7000 kPa.
If required, the hose can be extended to a length of up to 5 m. The necessary parts can be purchased from Miele. For a delivery head of more than 1 m (up to a max. of 1.8 m) a replacement drain pump will need to be fitted.
Connection should be made via a suitable switched socket. If the connection cable is damaged, it must be replaced with a Miele cable of the same type by a Miele approved service technician only.
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 100 kg Capacity 8 kg dry laundry Voltage See data plate Rated load See data plate Fuse rating...
Consumption data Consumption data for the nominated energy labelling programme according to AS/NZS 2040.1 & AS/NZS 2040.2 Load Consumption data Energy Water Duration in kWh in litres Normal Cold Water Cottons 8.0 kg 0.64 4 h 26 min Notes for test institutes: Detergent must be dispensed via the detergent dispenser drawer.
Page 77
Consumption data Load Energy Water Duration Residual moisture Litres h:min Cottons 90 °C 2.40 2:29 60 °C 1.35 2:29 60 °C 1.00 2:19 0.84 2:59 0.83 2:59 40 °C 0.98 2:39 40 °C 0.65 2:39 0.34 2:59 20 °C 0.38 2:39 Minimum iron 30 °C 0.34 1:59...
Settings Selecting settings You can use the settings to alter the machine's electronics to suit changing Touch the sensors until the requirements. setting you want appears in the display. Settings can be altered at any time. – The sensor scrolls down the list. Calling up settings –...
Settings Language Keypad tone The display can be set to appear in Each touch of a sensor is confirmed one of several different languages. with an audible tone. The flag after the word Language Options (Sprache in German) acts as a guide in –...
Settings Disp. switch-off stat. Memory The display and the sensor control The washing machine will save the lighting is switched off to save energy. last settings (temperature, spin speed The Start/Stop sensor flashes slowly. and some of the Extras) selected for a programme after the programme has Options started.
Temp. reduction – Normal (factory default setting) At high altitudes water has a lower – Plus boiling point. Miele recommends activating the reduce temperature – Plus setting at altitudes of 2000 m or above – Plus to prevent water from boiling. The maximum temperature is reduced to 80°C even if a higher temperature is...
Settings Maximum rinse level Low water pressure The water level in the rinse can be If the water pressure is below 100 kPa permanently set to the highest value. (1 bar), the programme will be cancelled and a fault message will This function is important for allergy appear.
– Specially formulated for people with can be ordered via the internet at sensitive skin shop.miele.com (depending on country) – Excellent stain removal even at low or from Miele (see end of this booklet temperatures for contact details). – Environmentally friendly (no Detergent...
Optional accessories Down Items Additives – Liquid detergent suitable for pillows, Booster sleeping bags and down filled items – For removing stains – Retains the elasticity of down and – Suitable for white and coloured feather filled items laundry – Retains the breathability of down –...
Page 87
Miele Experience Centre South Melbourne: Freemans Bay, Auckland 1011 206-210 Coventry Street South Melbourne, VIC 3205 Miele Experience Centre Auckland: Miele Experience Centre and Office Sydney: 8 College Hill 3 Skyline Place Freemans Bay, Auckland 1011 Frenchs Forest, NSW 2086 Telephone:...