Contents 12.3 App Gallery 1 Get Support 13 Netflix 1.1 Identify and Register Your TV 1.2 TV Help and User Manual 14 Amazon Prime Video 1.3 On-line Help and User Manual 1.4 Consumer Care / Repair 15 YouTube 2 Software 16 Environmental 2.1 Update Software 2.2 Software Version...
Identify and Register Your TV Manual Identify your TV - TV model number and serial To solve any Philips TV related problem, you can number consult our online support. You can select your language and enter your product model number.
Page 4
cause severe injury, irreparable damage to your TV or void your warranty.
The TV switches itself off for 10 seconds and then back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV Update Software • press twice •...
Middle Quick Guide Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control. 1 - Slide the battery door in the direction shown by 1 - OK key the arrow.
To open the Netflix App directly. With the TV switched on or from standby. Joystick - Local Control • If you have a Netflix subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Keys on TV Internet.
Quick Start Guide that comes with the TV. Connect Power Cable You can also download it from www.philips.com/TVsupport. • Insert the power cable into the POWER connector Use the model number of the TV to look for on the back of the TV.
Page 9
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its Copy protection type and gives each device a correct type name.
Mobile Device Screen Mirroring About Screen Mirroring You can view your photos or play your music and videos from a mobile device on your TV with Screen Mirroring. The mobile device and the TV should be within range, which usually means being in the same room.
If you clear this list, you will have The Philips TV Remote App is available for iOS and to confirm or block the connection for every device Android and is free of charge.
Page 13
Select a Device Bluetooth To select a wireless device… What You Need 1 - Select (Home) > Settings > All settings > Wireless and Networks and press OK. You can connect a wireless device with Bluetooth® to 2 - Select Bluetooth > Search Bluetooth Device and press OK.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
2 - Select Update channels to only add new digital channels. Channels 3 - Select Start and press OK to update channels. This can take a few minutes. Quick reinstall About Channels and Switch (Home) > Settings > Install Channels >...
1 - Select Antenna or Cable, and press OK. Caption Service 2 - Select Start and press OK. This can take a few minutes. Select the correct type of closed caption services. For more information, in Help, press Keywords and look up Closed Caption. Channel Logos ...
Rename Channel Search Channels 1 - Press , to switch to TV. > OK > OPTIONS > Search channel 2 - Press OK to open the current channel list. You can search for a channel to find it in a long list of 3 - Select one channel you want to rename.
in the TV listings. Create a favorites List 1 - While watching a TV channel, press OK to open Switch on closed caption the channel list. 1 - While you watch TV, press OPTIONS. 2 - Select the channel, and press ...
Ginga Note: This is for Brazil only. You can set Ginga to On or Off. 1 - Press (Home). 2 - Select Settings > All Settings > Channels > Ginga and press OK. 3 - Select On or Off.
Change Day TV guide If the TV guide information comes from the broadcaster, you can press to view the schedule for any of the next few days. Press to go back to the previous day. What You Need Alternatively, you can press ...
View Photos Videos, Photos and 1 - Press SOURCES, select USB and press OK. Music 2 - Select USB Flash Drive and press (right) to select the USB device you need. 3 - Select Photo, you can press ...
pause, then select on screen and press OK. Forward), (Pause the playback), (Play all/Play • To stop the video playback, press (Stop). one) • To go back to the folder, press . Open video folder 1 - Press SOURCES, select USB and Music Options press OK.
on the connected audio system. Open TV Setting • Sleep timer - Set the TV to switch to standby automatically after a preset time. Menus • Screen off - If you only listen to music on TV, you can switch off the TV screen. 10.1 •...
Page 24
To restore the style to its original setting, go Press the arrows (up) or (down) to set the to (Home) > Settings > All level of brightness of the picture signal. settings > Picture > Picture style, then Note: Setting of brightness much away from press ...
Page 25
and press Reset to reset the value. (Home) > Settings > All settings > Picture > Expert mode settings > Gamma Contrast Settings Press the arrows (up) or (down) to set a non- linear setting for picture luminance and contrast. Contrast Modes ...
Page 26
• Network/Internet streaming Ultra HD 50Hz/60Hz Dolby Vision Notification videos. (Home) > Settings > All settings > Picture > Dolby Vision Notification Natural Motion Switch On or Off Dolby Vision notification when Dolby Vision content begins to play on your TV. Natural Motion ...
Page 27
Atmos, which can add height dimension to sound. Delta volume With height dimension, sound can be precisely placed (Home) > Settings > All and moved in three-dimensional space. settings > Sound > Advanced > Delta volume Press the arrows (up) or (down) to adjust the Clear dialogue delta value for TV speaker volume.
Page 28
• Stereo (uncompressed): If your audio playback General Settings devices have no multichannel sound processing, select to only output stereo content to your audio Connection Related Settings playback devices. • Multichannel: Select to output multichannel audio USB Keyboard Settings content (compressed multichannel sound signal) or stereo audio content to your audio playback devices.
Page 29
Link, Bravia Theater Sync, Kuro Link, Simplink and different degrees for energy saving, or select Off to Viera Link. Not all brands are fully compatible with switch off energy saving mode. EasyLink. Example HDMI CEC branding names are property of their respective owners. Set screen off to save energy consumption ...
Page 30
Select a demo file for auto loop play. Logos and banner (Home) > Settings > All settings > General Reset TV Settings and Reinstall TV settings > Shop setup > Logos and banner Reset all settings value to original TV settings Set to display Feature logos and Promotional banner.
Page 31
(Home) > Settings > All settings > Universal app. This lock is only valid for 18+ rated apps from the access > Audio description > Audio Philips apps. description > Mixed volume, Audio effects, Speech • Select Mixed volume, you can mix the volume of the normal audio with the audio commentary.
Home Network network router with a connection to the Internet. Use a high-speed (broadband) connection To enjoy the full capabilities of your Philips Smart TV, to the Internet. your TV must be connected to the Internet. Connect the TV to a home network with a high-speed Internet connection.
Page 33
2 - You can set the number for the IP Memory Address, Netmask, Gateway, DNS 1, or DNS 2. With Clear Internet Memory you clear your Philips server registration and parental rating settings, your Switch On with Wi-Fi (WoWLAN) video store app logins, all Philips App Gallery favorites, Internet bookmarks and history.
- Internet pages are shown one page at a time and full screen. Recommended Apps In this window, Philips presents a range of recommended Apps for your country, Apps for Online TV or a selection of rental movies from Video stores.
Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
Amazon Prime Video With Amazon Prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TVsupport. 16.2 After use, batteries and/or cells should be taken to...
Product specifications are subject to change without • 1080p notice. For more specification details of this product, • 3840 x 2160p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz www.philips.com/TVsupport Power • Mains power: AC 110-240V +/-10% HDMI - UHD • Ambient temperature: 5°C to 35°C ...
Supported media server software • You can use any DLNA V1.5 certified media server software. • You can use the Philips TV Remote app (iOS and Android) on mobile devices. Performance may vary, depending on the capabilities of the mobile device and the software used.
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
Press (Home) > Settings > Help > Check the TV. picture size / Picture position is incorrect If the video clip stays black, call Philips. Wait until the • If the picture size—its aspect ratio—does not fit the clip ends and select Contact info in the Help menu.
18.6 No volume icon shown • When an HDMI-CEC audio device is connected and Sound you use the TV Remote Control to adjust the volume level from the device, this behavior is normal. No sound or poor sound quality • Check if the sound settings of the TV are OK, press the ...
Contact Philips TV Consumer Care to have the TV • NEVER place a television in an unstable location. checked before use. • NEVER place the television on tall furniture (for •...
result in an explosion. 19.2 • Leaving a battery in an extremely high temperature Screen Care surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. • A battery subjected to extremely low air pressure Clean that may result in an explosion or the leakage of flammable liquid or gas.
Envision, which is the manufacturer of the for early integration in its products. product. Envision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
Copyrights 21.1 HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and 21.4 other countries. DTS-HD (italics) DTS For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
It offers functional improvements over sh for both programming and interactive use. Open Source In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ 22.1 Open Source Software c-ares (1.10.0) c-ares is a C library that performs DNS requests and This television contains open source software.
Page 51
searching utilities of the GNU operating system. iptables (1.4.15) These programs are typically used in conjunction with For Cross connection. other programs to provide modular and powerful Source: http://www.netfilter.org/projects/iptables/ directory search and file locating capabilities to other commands. iputils (s20101006) Source: http://www.gnu.org/software/findutils/ The iputils package is set of small useful utilities for Linux networking.
Page 52
terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/ layers of the system.
Page 53
procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem. which can be found below. The package includes the programs ps, top, vmstat, w, Source: http://www.denx.de kill, free, slabtop, and skill.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. Envision does not bear any responsibility in these situations.
Digital Audio Out - Optical 11 Digital Media Renderer - DMR 32 Digital Out Delay 27 Philips Support 3 Digital Out Format 27 Philips TV Remote App 12 Digital Out Leveling 27 Picture Clean, Noise Reduction 25 Digital Out Menu 27 Picture Contrast Mode 25...
Page 56
Quick Settings Menu 23 Register TV 3 Remote Control 6 Remote Control - IR Sensor 7 Remote Control and Batteries 6 Remote Control Key 6 Rename or replace the device icon 14 Repair 3 Reset Settings 30 Safety and Care 45 Screen Mirroring 11 Screen Mirroring Connection 11 Screen Off 29...