Related Manuals for Miele F 2414 SF
Summary of Contents for Miele F 2414 SF
- Page 1 Operating and Installation Instructions Freezer To prevent accidents and machine damage, read these instructions before installation or use. en-US, CA M.-Nr. 11 508 640...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS ............Caring for the environment ................14 Installation......................15 Installation location ..................... 15 Climate class ....................15 Installation notes ....................16 Adjoining cabinetry/units................16 Load-bearing capacity of the niche floor ............17 Ventilation ....................... 17 Door hinge...................... 17 Side-by-side .................... - Page 3 Performing a Self Test ..................57 Switching on the Door Assistant ..............58 Switching off the Door Assistant ..............59 Setting up Miele@home ..................60 Switching off Demo Mode ................64 Resetting the settings to their default settings ..........65 Switching Sabbath Mode on or off ..............67 Switching on, switching off, or resetting the Water Filter Display ....
- Page 4 Contents Automatic defrosting ..................85 Cleaning and care ..................... 86 Cleaning agents....................86 Before cleaning the appliance................87 Interior and accessories ..................87 Cleaning the door seal ..................88 Cleaning the ventilation gaps ................88 Cleaning the water filter (IntensiveClear 2.0 mesh filter) (see “Optional acces- sories”) ........................
-
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS. Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these instructions in a safe place and pass them on to any future owner. - Page 6 The refrigeration appli- ance is also not suitable for use in areas where there is a risk of ex- plosion. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. ...
- Page 7 IMPORTANT SAFETY INSTRUCTIONS Safety with children To reduce the risk of injury, do not allow children to play in, on or near the appliance. The door hinges can cause injury. Keep children well away at all times. Ensure that any packing material is disposed of safely and kept out of the reach of children.
- Page 8 If the power cord supplied is damaged, it must only be replaced by an original part to prevent a hazard for the user. Miele can only guarantee the safety of the appliance when original Miele parts are used.
- Page 9 Faulty components must only be replaced by genuine Miele re- placement parts. Miele can only guarantee the safety standards of the appliance when Miele replacement parts are used. Miele cannot be held liable for damage caused by a faulty con- nection to the fresh water supply.
- Page 10 IMPORTANT SAFETY INSTRUCTIONS The ice cube maker must only be connected to a cold water line. DANGER of injury! Never tamper with the movable components on the ice cube maker or the element on the ice cube maker. Correct use ...
- Page 11 Observe the manufacturer's “use-by” dates and storage in- structions. Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become invalid. Stainless steel machines: ...
- Page 12 IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a short circuit.
- Page 13 IMPORTANT SAFETY INSTRUCTIONS Transport To avoid damage to the appliance, always transport it upright and in its packaging. Risk of injury and damage. The refrigeration appliance is very heavy and must be transported by 2 people. Disposal of your old appliance ...
-
Page 14: Caring For The Environment
Caring for the environment Disposal of packaging material Disposing of your old appli- ance The packaging is designed to protect the appliance from damage during Electronic and electrical appliances transportation. The packaging materials contain many valuable materials. They used are selected from materials which also contain certain materials, com- are environmentally friendly for disposal pounds, and components which were... -
Page 15: Installation
*INSTALLATION* Installation If installation near a heat source is un- Installation location avoidable, observe the following mini- This appliance should be installed in a mum distances between the appliance dry, well-ventilated room. and the heat source: When deciding where to install your re- - At least 1 1/4"... -
Page 16: Installation Notes
*INSTALLATION* Installation Installation notes Risk of damage due to high hu- midity. Risk of damage and injury due to In environments with high humidity, the refrigeration appliance tipping condensation can build up on exter- over. nal refrigeration appliance panels, This refrigeration appliance is very which can cause corrosion. -
Page 17: Load-Bearing Capacity Of The Niche Floor
The refrigeration appliance is sup- plied with a fixed hinge. On no ac- count should you attempt to change the door hinge yourself. If you need to change the door hinge to the other side, please contact the Miele Service department. -
Page 18: Side-By-Side
A side-by-side merging kit and a top frame (KTF) are required for this. Both The refrigeration appliances are secured are available from your Miele dealer or individually in their installation niche us- Miele Service. ing the supplied installation material. -
Page 19: Specifications For The Plumbed Water Connection
*INSTALLATION* Installation . . . without partition wall Specifications for the plumbed water connection - The machine may only be connected to the plumbed water connection by qualified technicians. - Connection to the household water supply must comply with the applica- ble regulations in the country in which the machine is being installed. -
Page 20: Installation Dimensions
*INSTALLATION* Installation Installation dimensions Position of the electrical and plumbed water connections - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. - The 1/4" (6 mm) plumbed water connection should not be positioned higher than 2"... - Page 21 *INSTALLATION* Installation F 2412 SF 84"–85 3/16" 24" (610 mm) 24" (610 mm) 3/4" (19 mm) (2,134– 2,164 mm) F 2812 SF 84"–85 3/16" 30" (762 mm) 24" (610 mm) 3/4" (19 mm) (2,134– 2,164 mm) F 2912 SF 84"–85 3/16" 36" (915 mm) 24"...
- Page 22 *INSTALLATION* Installation 1 3/16" (30 mm) 7/8" 10 5/16" (22 mm) (262 mm) 3 3/8" 4" 4" (85 mm) (102 mm) (102 mm) Side view...
-
Page 23: Dimensions When The Appliance Door Is Open (Opening Angle 115°)
*INSTALLATION* Installation Dimensions when the appliance door is open (opening angle 115°) 3/8" (10 mm) F 2412 SF 20 11/16" Cabinet front Door handle 9 5/16" (237 mm) (525 mm) F 2812 SF 32 5/8" Cabinet front Door handle 14 5/16" (363 mm) (829 mm) F 2912 SF 38 11/16"... -
Page 24: Building In The Appliance
*INSTALLATION* Installation Tools required Building in the appliance - Cordless drill Before starting... - TX 20 screwdriver It is essential to read these installa- - Hammer drill tion instructions carefully before starting to install the appliance. - Drill bits in various sizes, depending The appliance should be installed by on materials a suitably qualified tradesman in ac-... -
Page 25: Aligning The Installation Niche
*INSTALLATION* Installation Aligning the installation niche Checking the installation niche Check the installation dimensions (see “Installation – Installation dimen- sions”). Check the position of the electrical connection. The length of the power cord is 9' 10" (3 m). The electrical socket must not be concealed behind the appliance and must be easily accessible in an... -
Page 26: Before Installation
*INSTALLATION* Installation Before installation Before installation, remove any ac- cessories from the back of the appli- ance. Check the refrigeration appliance for damage during transportation. Do not install a damaged appliance. Check that all parts at the back of the appliance are unhindered. -
Page 27: Preparing The Installation Niche
*INSTALLATION* Installation Preparing the installation niche The anti-tip brackets prevent the refrig- eration appliance from tipping. Risk of damage and injury due to The anti-tip brackets are also used to fix the refrigeration appliance tipping the installation niche securely to the over. - Page 28 *INSTALLATION* Installation Risk of damage and injury due to the refrigeration appliance tipping over. Retaining screws for different uses If the anti-tip brackets are fixed too and types of material are supplied in high up, they cannot be used to se- the accompanying pack.
-
Page 29: Pushing The Appliance Into The Niche
*INSTALLATION* Installation Pushing the appliance into the niche Push the appliance into the niche, taking care not to damage the power cord and plumbed water connec- tions. If you are installing several refrigera- tion appliances side by side, now se- cure the appliances to one another (see the installation instructions for the side-by-side installation kit). - Page 30 *INSTALLATION* Installation Tip: Secure the power cord to prevent it becoming caught: tie a piece of string to the middle of the power cord and as the refrigeration appliance is being pushed into the niche, pull the cord for- ward underneath the appliance. ...
-
Page 31: Aligning The Refrigeration Appliance
*INSTALLATION* Installation Aligning the refrigeration appliance Align the appliance with neighboring cabinet fronts as described below. The adjustable feet at the front and back of the appliance can all be ad- justed from the front of the appliance. Risk of damage due to incorrect ... - Page 32 *INSTALLATION* Installation Adjust the rear feet with a ratchet (at- Adjust the front feet with a ratchet (at- tachment: socket, 8 mm) or a TX 20 tachment: socket, 8 mm) or a TX 20 screwdriver . screwdriver . Tip: Proceed carefully when adjusting the feet, alternating between the left and right feet.
-
Page 33: Securing The Appliance In The Niche
*INSTALLATION* Installation Securing the appliance in the niche Risk of damage if the feet are adjusted too much. The rear adjustable feet can be dam- aged. Unscrew the feet only until the marking on the toe-kick is aligned to a maximum of 2 7/16"... -
Page 34: Securing The Toe-Kick Board And Cover
*INSTALLATION* Installation Securing the toe-kick board and cover Click the toe-kick board onto the bottom of the appliance toe-kick. Remove the film from the adhesive strips on the toe-kick cover pro- Aligning the appliance door vided . Following installation, align the appli- ance door with adjacent cabinet fronts. - Page 35 *INSTALLATION* Installation Slightly loosen the screws on the fixing bracket. Slightly loosen the screws in the angle trims on both sides. Remove the covers from both sides of the appliance door. Remove the cover from the light contact switch.
- Page 36 *INSTALLATION* Installation Remove the nuts and washers from the threaded bolts . If necessary, also align the depth of the appliance door via the gaps in the angle trims. Close the appliance door and check the distance between the door and adjacent cabinet fronts again.
- Page 37 *INSTALLATION* Installation Place the covers provided on the fixing brackets. Remove the spacers from the ap- pliance door.
-
Page 38: Water Connection
*INSTALLATION* Installation The appliance is only suitable for Water connection connection to a cold water line, Information on the fresh water con- which nection - is directly connected to the water supply in order to ensure that water is Risk of injury and appliance circulated in the cold water line. -
Page 39: Installing The Water Hose To The Appliance
*INSTALLATION* Installation Unduly high water pressure in the system can result in damage to the appliance. Install a pressure reducing valve if the water pressure in the system ex- ceeds 116 psi (8 bar). Do not install the system if the water pressure exceeds 120 psi (8.3 bar). -
Page 40: Electrical Connection
*INSTALLATION* Installation Wait for 1 hour after installation before Electrical connection plugging the appliance into the power Risk of electric shock! supply. This allows coolant and refriger- ator oil to settle in accordance with reg- The appliance must only be switched ulations. - Page 41 *INSTALLATION* Installation Connecting the appliance If the outlet is no longer accessible after installation, an additional means of dis- connection must be provided for all poles. Suitable means of disconnection include switches with an all-pole dis- connect device with a contact opening of at least 1/8"...
-
Page 42: Saving Energy
Saving energy Normal Increased energy consumption energy consumption Installation / In a well-ventilated room. In an enclosed, poorly venti- Maintenance lated room. Protected from direct sun- In direct sunlight. light. Away from heat sources (ra- Near a heat source (radiator, diator, range/oven). - Page 43 Saving energy Normal Increased energy consumption energy consumption Drawers and shelves ar- ranged as they were when the appliance was delivered. Only open the door when Frequent opening of the necessary and for as short a door for long periods will time as possible.
-
Page 44: Guide To The Appliance
Guide to the appliance F 2412 SF a Display b On/Off switch c Door shelves in the appliance door d Interior lighting e Shelves f Ice maker g Ice-cube container h Freezer baskets i Automatic door opening (Push2open/Pull2open) j Water filter... -
Page 45: F 2812 Sf, F 2912 Sf
Guide to the appliance F 2812 SF, F 2912 SF a Display b On/Off switch c Door shelves in the appliance door d Interior lighting e Shelves f Ice maker g Ice-cube container h Freezer baskets i Automatic door opening (Push2open/Pull2open) j Water filter... -
Page 46: Main Screen
(only visible when the SuperFrost function has been switched on) b Temperature display (target temperature) c Sensor control for setting the temperature d Display for Miele@home connection status (only visible when Miele@home has been set up) e Sensor control for adjusting various settings in Settings mode... -
Page 47: Settings Mode
Door Assistant Switch on ( Push2Open Pull2Open ) or switch off (see “Selecting additional settings”) Miele@home Set up, deactivate, or query WiFi connection sta- tus (see “Selecting additional settings”) * Demo Mode Switch off * (only visible when Demo Mode , is switched on see “Selecting additional settings”) - Page 48 Guide to the appliance Switch on or off Sabbath Mode (see “Selecting additional settings”) Water Filter Display Switch on or off or reset (see “Selecting additional settings”) Symbols in settings mode / Scroll in settings mode or select a setting /...
-
Page 49: Accessories
Optional accessories The door hinging must only be replaced by Miele Technical Service. A range of useful Miele accessories and care products are available for your ap- Accessories are available to order via pliance. -
Page 50: Before First Use
Before first use Choosing the right Door Assistant Before first use (Push2Open/Pull2Open) Allow the appliance to stand for ap- The Door Assistant helps you to open prox. 1 hour prior to connecting it to the appliance door. the power supply. This will help prevent any malfunc- You can choose between the two Door tions. -
Page 51: Operating The Refrigeration Appliance
Before first use Settings mode Operating the refrigeration ap- pliance In Settings mode , you can select different refrigeration appliance func- The touch display can be scratched tions and alter their settings to some by pointed or sharp objects, e.g., extent (see “Selecting additional set- pens. -
Page 52: Starting Up For The First Time
- Set the Temperature Unit (degrees Celsius) or (degrees °C °F Fahrenheit) - Set up Miele@home Select Continue if you wish to set up now (to do this, follow Miele@home the instructions under “Selecting ad- ditional settings – Miele@home”). -
Page 53: Switching On And Off
(at least 0°F/-18°C). cool and the interior lighting will come on when the appliance door is opened. Switching off the appliance Miele will appear, followed by the main Turn the refrigeration appliance off by screen on the refrigeration appliance pressing the On/Off switch. -
Page 54: Switching Off For Longer Periods Of Time
Switching on and off Switching off for longer peri- ods of time If the appliance is not going to be used for a longer period of time: Turn the appliance off. Unplug the appliance or switch off the breaker. ... -
Page 55: Selecting Additional Settings
Selecting additional settings In settings mode , certain settings The display is unlocked briefly so you can be adjusted and functions selected, can adjust the setting as required. Clos- allowing you to adjust the machine to ing the appliance door will reactivate suit your requirements. -
Page 56: Switching Eco Mode On Or Off
Selecting additional settings Switching Eco Mode on or Health risk caused by decom- posing food. The usability and quality of food may Eco Mode is useful when going on vaca- deteriorate if the temperature re- tion, for example, if you do not wish to mains above 0°F (-18°C) for an ex- switch off the appliance completely or tended period. -
Page 57: Performing A Self Test
sensor control. Make a note of the error message(s) displayed. Contact Miele Service and inform them of the error message(s) on the display. Confirm the message with OK. -
Page 58: Switching On The Door Assistant
Selecting additional settings Touch the sensor control to return Switching on the Door Assis- to the previous menu level. tant – Adjusting the intensity You can choose between the two Door Assistants Push2Open Pull2Open You can also adjust the intensity of the The default Door Assistant is Push2Open function. -
Page 59: Switching Off The Door Assistant
Selecting additional settings – Adjusting the duration of the Auto- – Adjusting the intensity Close function You can also adjust the intensity of the You can also adjust the duration for function. The lower the set in- Pull2Open how long the appliance door will remain tensity, the less force required when open until it closes automatically. -
Page 60: Setting Up Miele@Home
The ability to use the Miele@mobile app - the Miele@mobile app depends on the availability of the - a Miele user account You can create Miele@home service in your country. a user account via the Miele@mobile The Miele@home service is not avail- app. - Page 61 Confirm your selection with OK. Use the and sensor controls to select via the App and select OK to confirm your selection. Open the Miele@mobile app and fol- low the instructions in the app.
- Page 62 Activating Miele@home Confirm the process with OK. If you have already activated To be able to use the Miele@home Miele@home and then disconnected functions, you also have to register the connection, you will need to reac- your refrigeration appliance in the app.
- Page 63 - connected: there is a weak con- nection - disconnected Setting up Miele@home again If you have changed your WiFi network, you can set up Miele@home again for your appliance. In Settings mode , use the and sensor controls to select Miele@home and select OK to confirm your selection.
-
Page 64: Switching Off Demo Mode
Selecting additional settings Switching off Demo Mode Demo mode allows the appliance to be presented in the showroom with- out the cooling system being switched on. Do not activate this set- ting for domestic use. If Demo mode has been switched on as a default setting, ... -
Page 65: Resetting The Settings To Their Default Settings
Selecting additional settings Resetting the settings to their default settings You can reset the refrigeration appliance‘s settings to their default settings. Reset the refrigeration appliance’s settings to the default settings when disposing of your refrigeration appliance, selling it, or putting a used refrigeration appliance into operation. - Page 66 ° C Temperature Unit / Keypad Lock Switched off Eco Mode Switched off Door Assistant Push2open Miele@home Switched off Dispenser Unit Switched on Sabbath Mode Switched off Water Filter Display Switched on ...
-
Page 67: Switching Sabbath Mode On Or Off
Selecting additional settings Switching Sabbath Mode on - Ice Maker (if previously switched on) or off You can still select: The refrigeration appliance has a Sab- bath Mode to support the observance of - the sensor control for Settings religious customs. mode ... -
Page 68: Switching On, Switching Off, Or Resetting The Water Filter Display
Selecting additional settings Switching on the Water Filter Display Switching on, switching off, or resetting the Water Filter Dis- If the has been Water Filter Display play switched off once, it must be switched Depending on the quantity of ice cubes on again if required. - Page 69 Selecting additional settings Water Filter Display has been switched off. Resetting the Water Filter Display After you have replaced or cleaned the water filter, you must reset the Water Fil- so that it can be displayed ter Display again after 6 months. If you do not reset the display, it ap- pears again and again.
-
Page 70: The Correct Temperature
The correct temperature It is very important to set the correct Setting the temperature temperature for storing food in the ap- Touch the sensor control to set the pliance. Bacteria will cause food which temperature. is not stored at the correct temperature to deteriorate rapidly. - Page 71 The correct temperature The ambient temperature in the room and the installation location can af- fect the time it takes for the appli- ance to reach the lowest tempera- ture. If the ambient temperature is too high, the appliance may not reach the lowest temperature.
-
Page 72: Using Superfrost
Using SuperFrost Turning off SuperFrost SuperFrost function Touch the sensor control to set the For best results, turn on the SuperFrost temperature. function before putting fresh food into the freezer. The symbol is highlighted in color and the temperature value of -22°F Fresh food will be frozen quickly, so that (-30°C) is shown in the display. -
Page 73: Temperature And Door Alarm
Temperature and door alarm The appliance has been fitted with a Health risk caused by decom- warning system which ensures that the posing food. temperature in the freezer cannot rise If the temperature in the freezer re- unnoticed and to avoid energy being mains above 0°F (-18°C) for a long wasted if the door is left open. - Page 74 Temperature and door alarm Door alarm An alarm will sound if the appliance door has been left open for longer than approx. 2 minutes. Close the door message also ap- pears on the display. As soon as the door is closed, the alarm will stop and the message on the display will disappear.
-
Page 75: Adjusting The Interior Fittings
Adjusting the interior fittings Removing or moving the door Removing or moving the shelves shelves Only move or remove the door shelves when they are empty. Hold the shelf on both sides and raise it slightly so that it can be lifted with the catches over the guide at the back. -
Page 76: Removing The Shelf Above The Ice Maker
Adjusting the interior fittings Removing the shelf above the Removing the freezer baskets ice maker Open the appliance door as wide as possible. The opening angle of the appliance door must not be limited to 90° be- cause otherwise the freezer baskets cannot be removed. -
Page 77: Removing The Ice Container
Adjusting the interior fittings Removing the dividing panel Removing the ice container (depending on the model) Open the appliance door as far as it will go. The opening angle of the appliance door must not be limited to 90° be- cause otherwise the upper freezer basket cannot be pulled out as far as it will go. - Page 78 Adjusting the interior fittings Insert the ice container with the rear- most side first, so that it engages. Push the upper freezer basket all the way back in.
-
Page 79: Freezing And Storing Food
Freezing and storing food reabsorb it during the defrosting Always observe USDA food safety process, and very little water collects guidelines. around the defrosted food. Risk of fire from electrical appli- Storing frozen food ances. Never re-freeze partially or fully de- Operating electrical devices in the frosted food. -
Page 80: Home Freezing
Freezing and storing food - Placing hot food or drink in the Home freezing freezer causes food that is already Only freeze food that is fresh and in frozen to partially thaw and increases good condition. energy consumption. Allow hot food and drink to cool down before plac- Tips for home freezing ing it in the freezer. -
Page 81: Placing Food In The Freezer
Freezing and storing food Before placing food in the Unfrozen food should not touch freezer frozen food as this will cause the frozen food to begin to thaw. When freezing more than 4.4 lb (2 kg) of fresh food, switch on the Super- Storage time for frozen food Frost function some time before plac- ing the food in the freezer (see “Su-... - Page 82 Freezing and storing food Defrosting frozen goods Cooling drinks quickly When chilling drinks in the freezer, Never re-freeze partially or fully de- make sure that bottles are not left in for frosted food. Defrosted food may only more than one hour. Otherwise they be re-frozen after it has been cooked.
-
Page 83: Making Ice Cubes
Making ice cubes Ice cube production is halted automati- For the automatic ice cube maker to cally as soon as the ice cube container operate, it must be connected to a is full. water supply (see “Installation – Water supply”). The ice maker can make up to approx. - Page 84 Making ice cubes Turning off the ice maker The ice maker can be turned off inde- pendently of the freezer zone if you do not want to make any ice cubes. Close the faucet in the water supply line (approx. 3 hours before switching off the appliance to avoid the build- up of bacteria caused by stagnant water).
-
Page 85: Automatic Defrosting
Automatic defrosting WARNING! DANGER of injury and damage! Do not use any mechanical or other types of aids which are not recom- mended by the manufacturer to ac- celerate the defrosting process. The appliance is equipped with a “NoFrost” system. The freezer defrosts automatically. -
Page 86: Cleaning And Care
Cleaning and care Cleaning agents WARNING! DANGER of electric shock! To avoid damaging the surfaces of your Unplug the appliance or trip the cir- appliance, do not use: cuit breaker. - cleaning agents containing soda, am- monia, acids, or chloride ... -
Page 87: Before Cleaning The Appliance
Cleaning and care Before cleaning the appliance Interior and accessories Turn the appliance off completely by Clean the appliance regularly, or at pressing the On/Off switch. least once a month. Clean up any spills, stains, or food Take any food out of the appliance immediately. -
Page 88: Cleaning The Door Seal
The door seals should be cleaned regularly with clean water, and then Do not use Miele stainless steel wiped dry with a soft cloth. conditioning agent on these sur- faces, as it will cause noticeable Cleaning the ventilation gaps smearing. -
Page 89: Cleaning The Water Filter (Intensiveclear 2.0 Mesh Filter) (See "Optional Acces- Sories")
Cleaning and care Cleaning the water filter (Inten- siveClear 2.0 mesh filter) (see “Optional accessories”) Depending on the quantity of ice cubes produced, the IntensiveClear 2.0 mesh filter must be cleaned approx. every 6 months. You can use the Replace the water filter display on the display as a reminder to clean the water filter. -
Page 90: After Cleaning
Cleaning and care After cleaning Replace all shelves and accessories in the appliance. Switch the refrigeration appliance back on. Switch on the SuperFrost function for a while so that the freezer zone can cool down quickly. Once the freezer zone has reached the required temperature, place the freezer baskets containing the frozen ... -
Page 91: Water Filter
Inten- siveClear 2.0 charcoal filter or clean the IntensiveClear 2.0 mesh filter. New water filters (IntensiveClear 2.0 mesh filters and IntensiveClear 2.0 charcoal filters) are available from Miele Customer Service, from your dealer, or via the internet. -
Page 92: Changing The Water Filter
Water filter Empty the old filter cartridge. Changing the water filter Tip: The old filter cartridge can be dis- Air in the system can cause water to posed of with household trash. gush out and the filter cartridge to spring out when it is removed. -
Page 93: Using An External Water Filter
Water filter Once the IntensiveClear 2.0 charcoal fil- ter has been replaced, the water filter display must be reset using Settings mode on the display (see “Selecting additional settings – Resetting the Water Filter Display ”). After inserting a new water filter, dis- pose of all ice cubes produced in the next 24 hours following the change. - Page 94 Water filter Performance Data Sheet Model: Miele 07134220 Use Replacement Cartridge 07134220 NSF System Trade name: WFS200MF & WFS210MF NSF Replacement Cartridge No: WFC100MF (for WFS200MF) & WFC110MF (for WFS210MF) System tested and certified by NSF International against NSF/ANSI Standard 42, 53, 401 for the reduction of the claims listed below.
- Page 95 Water filter Influent hallenge Reduction ermissible roduct ubstance Average eduction concentration requirement water concentration DEET 1,400 ng/L ± 20% >98.7% 200 ng/L Phenytoin 200 ng/L ± 20% >94.4% 30 ng/L Metolachlor 1,400 ng/L ± 20% >98.7% 200 ng/L Ibuprofen 400 ng/L ± 20% >95.3% 60 ng/L Trimethoprim...
-
Page 96: Lead-Free Certificate
This product F 2412 Vi/SF, F 28x2 Vi/SF, F 29x2 Vi/SF is tested and certified by This product F 1413 Vi (KIMSDF18US) is tested and certified by WQA against WQA against NSF/ANSI 372 for “lead free” compliance. NSF/ANSI 372 for "lead free" compliance. Miele & Cie. KG Carl-Miele-Strasse 29 D-33332 Gütersloh Miele & Cie. KG Carl-Miele-Straße 29... -
Page 97: Frequently Asked Questions
“Performing a ”). Self Test Test . Your appliance will Contact Miele Service and inform them of the error be checked for any message(s) on the display. faults or malfunctions. The appliance is not The appliance has not been turned on. - Page 98 Frequently Asked Questions Problem Possible cause and solution The compressor is turn- The ventilation gaps in the cabinetry have been cov- ing on more frequently ered or become too dusty. and for longer periods Do not block the ventilation gaps. of time;...
- Page 99 Frequently Asked Questions Problem Possible cause and solution The compressor is turn- The temperature setting is too low. ing on more frequently Correct the temperature setting. and for longer periods A large amount of food was put in for freezing at of time;...
- Page 100 Frequently Asked Questions Problem Possible cause and solution No alarm sounds de- You have switched off the audible signal. spite the appliance door Switch the audible signal back on using Settings being open. mode . Sabbath Mode function is switched on: the tem- perature display is dark and the symbol is shown on the display.
- Page 101 Frequently Asked Questions Messages in the display Message Possible cause and solution The warning sounds The temperature in the appliance has risen signifi- and the message Freezer cantly. temperature too high. Max. This could be due to, for example: appears temperature °C –...
- Page 102 The voltage level is too high/low. Observe the connection data under “Electrical connections”. Contact Miele Service if necessary. To turn the alarm off, touch the symbol. The error message does not disappear from the dis- play until the error has been rectified.
- Page 103 Frequently Asked Questions Problems with the ice cube maker Problem Possible cause and solution The ice maker is not The refrigeration appliance and the ice maker are not producing any ice switched on. cubes. Switch the refrigeration appliance and the ice maker on.
- Page 104 Frequently Asked Questions Problem Possible cause and solution The ice maker is only Several household appliances connected to the producing small ice plumbed water connection are in operation, which cubes. has reduced the amount of water being taken in. Avoid using the dishwasher, washing machine, etc.
- Page 105 The water intake is faulty. the appliance. Close the faucet immediately. Check the water line for damage. Contact Miele Customer Service. Check whether the water connection pressure is too high. If the water connection pressure is too high, this can cause leaks (see “Installation –...
- Page 106 Do not remove the lighting cover. The LED lighting may only be repaired or replaced by Miele Service. Risk of injury from LED lighting. This lighting corresponds to risk group RG 2. If the cover is defective, there is a risk of eye injury.
-
Page 107: Causes Of Noises
Causes of noises Normal Cause noises Brrrrr... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulates through the pipes. -
Page 108: Customer Service
In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call on- line at www.miele.com/service. Contact information for Miele Cus- tomer Service can be found at the end of this document. -
Page 109: Declaration Of Conformity
Declaration of conformity Frequency range 2.412 GHz – 2.462 GHz Maximum trans- < 100 mW mitting power... -
Page 110: Copyrights And Licenses
Copyrights and licenses Miele uses their own and third party software which is not subject to any so-called open source license for the operation and control of the device/appliance. This software/these software components are protected by copyright. The copyright powers of Miele and third parties have to be respected. - Page 111 Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
- Page 112 F 2414 SF, F 2802 SF, F 2812 SF, F 2902 SF, F 2912 SF en-US, CA M.-Nr. 11 508 640 / 01...