Page 1
Operating instructions Heat pump dryer To avoid the risk of accidents or damage to the appliance it is essen- tial to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 12 032 430...
Examples on how to operate the appliance ............22 Moving programmes ..................23 Before using for the first time ................25 Installation ......................25 Downtime after installation................25 Miele@home ......................25 Setting the language ................... 26 Energy saving tips ..................... 29 Energy saving tips ....................29 Feedback......................30 1.
Page 3
Contents 6. End of programme - unload the drum ............38 End of programme....................38 Unloading the drum..................... 38 Programme chart ....................39 Extras........................46 DryFresh ......................46 PowerFresh......................46 DryCare 40 ......................47 Gentle tumble ...................... 47 Quick ........................47 Eco ........................
Page 4
Contents Fragrance flacon....................57 FragranceDos ...................... 57 Removing the protective seal from the fragrance flacon........57 Inserting the fragrance flacon................58 Opening the fragrance flacon ................59 Closing the fragrance flacon ................59 Removing/replacing the fragrance flacon ............60 Cleaning and care ..................... 61 Fluff filters......................
Page 5
Contents Installation......................80 Front view ......................80 Rear view......................81 Transporting the tumble dryer ................81 Transporting the tumble dryer to its installation site ........81 Installation ......................82 Levelling the tumble dryer ................82 Downtime after installation................82 Ventilation ....................... 82 Before moving the tumble dryer again (e.g.
/ recycling centre for electrical and electronic ap- pliances, or contact your dealer or Miele for advice. You are also respons- ible for deleting any personal data that may be stored on the appliance being disposed of. Please ensure that your old appliance poses no risk to children while being stored prior to disposal.
Any other applications may be dangerous. Miele cannot be held li- able for damage resulting from incorrect or improper use or opera-...
Page 9
Warning and Safety instructions This tumble dryer can only be used by people with reduced phys- ical, sensory or mental capabilities, or lack of experience or know- ledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the con- sequences of incorrect operation.
Page 10
It is essential that this standard safety re- quirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
Page 11
Miele replacement parts are used. Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician, otherwise any subsequent damage will not be covered by the warranty.
Page 12
Warning and Safety instructions Heat pump technology and refrigerant: this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temper- ature level and liquefied by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circu- lating drying air takes place.
Page 13
This special lamp must only be used for the purpose it is intended for. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised person or the Miele Service Department.
Page 14
Warning and Safety instructions Correct use Do not install the tumble dryer in a room where there is a risk of frost occurring. At temperatures around freezing point the tumble dryer may not be able to operate properly. There is a risk of damage if the condensed water is allowed to freeze in the pump and hoses.
Page 15
Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: - Items which have not been washed. - Items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other depos- its (such as cosmetics, lotions etc).
Page 16
Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: - Items which have been cleaned using chemicals (e.g. professional dry-cleaning agents). - Items which contain a large proportion of rubber, foam rubber or rubber-like materials.
Page 17
Warning and Safety instructions The tumble dryer must not be used without fluff filters or - with damaged fluff filters, or - with a damaged plinth filter. This would cause an excessive build-up of fluff which in turn would cause a fault.
Page 18
Warning and Safety instructions Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can leak out of the flacon. Make sure that...
Page 19
If you order a plinth for this tumble dryer (available from Miele as an optional accessory - depending on country), make sure it is the correct one.
Operating the tumble dryer Control panel a sensor control Takes you back one level in the menu. b Touch display c Start/Stop sensor Touching the Start/Stop sensor starts the selected programme or cancels a programme that has already been started. The sensor flashes slowly as soon as it is possible for a programme to be started and then lights up constantly after the programme has started.
MobileStart Help With MobileStart you can operate your tumble dryer remotely with the Miele Main menu page 1 app. You can scroll to the second page of the main menu by swiping your finger Remote control setting must be across the display.
Operating the tumble dryer Extras menu Examples on how to operate the appliance Extras 11:02 Lists DryFresh DryCare 40 Programmes menu Programmes 11:02 PowerFresh Gentle tumble Cottons Minimum iron 0:00 0:00 You can scroll right or left by swiping Cottons...
Operating the tumble dryer Moving programmes Setting numerical values You can move the programmes around You can set numerical values in some in the menu to change the sequence in menus. which they are displayed. Clock display Programmes 11:02 ...
Page 24
Operating the tumble dryer Pull-down menu Exiting a menu Touch the sensor to return to the The pull-down menu can be used to display information, e.g. about a drying previous screen. programme. Entries made before this which have not ...
- a WiFi network paying particular attention to the in- - the Miele app formation provided under “Installa- tion”. - a Miele user account. The user ac- count can be created via the Miele app. Removing the protective foil and stickers The Miele app will guide you as you ...
Setting the language Miele@home availability You will be asked to select the language The ability to use the Miele app de- you require for the display. It is possible pends on the availability of the to change the language at any time via Miele@home service in your country.
Page 27
WiFi network. Skip Continue The time of day is set automatically if To set up Miele@home now: touch connection is established with a WiFi Continue sensor control. network. Tip: To postpone setup until later: touch sensor control.
Page 28
Before using for the first time Continuing with commission- Please see “1. Notes on correct laun- dry care”. You can then select a programme and load the tumble dryer as de- scribed in “2. Loading the tumble dryer” and “3. Selecting a pro- gramme”.
Energy saving tips - If possible, make use of time-vari- Energy saving tips able, low-cost electricity tariffs. Ask This dryer with heat-pump technology your energy supplier for information. is designed for energy-saving drying Your tumble dryer's delay start func- cycles. However, you can save a little tion will be useful as you can select more energy with the following meas- when during the next 24 hours you...
Energy saving tips 2. Actual consumption Feedback You can view information about the en- The actual energy consumption and ergy consumption of your tumble dryer the costs can be viewed during the in the pull-down menu. programme or at the end of the pro- gramme.
1. Notes on correct laundry care Points to note regarding Risk of fire due to incorrect use washed laundry and operation. The laundry can burn and destroy - When washing very heavily soiled the dryer and the surroundings. items ensure that you use sufficient See “Warning and Safety”...
1. Notes on correct laundry care Care symbols Drying Tip: See the “Programme chart”, which Drying contains everything you need to know Temperature about programmes and load sizes. Normal or higher - Always observe the maximum recom- Reduced* mended load size for each pro- ...
2. Load the tumble dryer Checking FragranceDos Loading the laundry If you are not using a fragrance flacon, Preventing damage to fabrics. check that the FragranceDos sockets Before loading the dryer, read “1. are closed. Notes on correct laundry care”. The “Fragrance flacon”...
3. Selecting a programme Overview 11:02 Switching on the tumble dryer Touch the sensor to switch the Drying level tumble dryer on. Normal Tip: The condensed water can be re- Cottons Extras cycled when certain programmes are 2:35 not selected used.
4. Selecting programme settings Tip: Reduce the load size for the cor- Selecting the drying level responding programme to half the max- Check the “Programme chart” to see imum load size specified in these oper- which programme you can select a dry- ating instructions.
4. Selecting programme settings Selecting the running time for Selecting extras time programmes See “Extras” to find out which pro- grammes allow you to select an extra You can change the duration in 10- and which extra is appropriate for your minute increments.
5. Starting a programme content of the water. PerfectDry continu- Starting the programme ally adapts, constantly increasing the The programme can be started when accuracy of the time left. the Start/Stop sensor control is flashing If you barely place anything inside the on and off.
6. End of programme - unload the drum Remove the fluff from the 2 fluff filters End of programme in the door opening: see “Cleaning The programme is finished when Finish/ and care – Fluff filters”. Anti-crease appears in the display. The ...
Programme chart All weights marked with * are based on the weight of dry laundry. Cottons max. 9 kg* HygieneDry Use for - Cottons and linen fabric which will be in direct contact with the skin, e.g. underwear, baby clothes, bed linen, towelling. - Other hard-wearing fabrics with special hygiene requirements.
Page 40
Programme chart Cottons max. 9 kg* Use for Cotton items such as those described under Cottons Normal with normal residual moisture. Note - Items are dried to a Normal level only in this programme. - The Cottons programme is the most energy-efficient for dry- ing cotton items with normal residual moisture levels.
Page 41
Programme chart Automatic max. 5 kg* Normal plus, Normal, Hand iron , Hand iron Use for Mixed loads of garments suitable for the Cottons and Minimum iron programmes. Woollens handcare max. 2 kg* Use for Woollen garments and fabric containing wool blends, e.g. pullovers, cardigans, tights. Note - Wool and wool blend items are only fluffed up;...
Page 42
Programme chart Steam care max. 1 kg* Normal, Hand iron Use for - All items made of cotton or linen - For minimum iron items made of cotton, mixed or synthetic fibre. For example, cotton trousers, anoraks and shirts. - For dampening fabrics before ironing - For smoothing fabrics that are creased - Select Hand iron if the items are to be ironed after drying.
Page 43
Programme chart Basket programme Max. load for basket 3.5 kg Note - This programme may only be used with the Miele tumble dryer basket TRK 555 (optional accessory) fitted. - Always follow the operating instructions for the tumble dryer bas- ket. - Make sure that no sleeves, straps, belt straps and boot legs (for example) come into contact with the tumble dryer drum or drum ribs.
Page 44
Programme chart Warm air max. 9 kg* Use for - Multi-layered fabrics whose layers have different drying character- istics, e.g. jackets, pillows, sleeping bags and other bulky items. - For drying individual items, e.g. bath towels, bathing costumes and tea towels. Do not select the longest drying time to start with. Check the items as you are drying them to find the optimum time.
Page 45
Programme chart Extra quiet max. 9 kg* Normal plus, Normal, Hand iron , Hand iron , Machine iron Use for Mixed loads of garments suitable for the Cottons and Minimum iron programmes. Use to reduce the noise of the tumble dryer during quiet periods. Pre-ironing max. 1 kg* Normal, Hand iron ...
Extras The drying programmes can be aug- Condensed water from the condensed mented with various extra options. water container is sprayed into the The table lists the selection options. drum. The condensed water container must therefore be filled to at least the ―min―...
Extras DryCare 40 Quick Robust garments with the care sym- This option dries fabrics gently at very low temperature. bol can be dried with reduced drying time. It can be used for all fabrics that are free of wool and are washable at tem- The compressor power is increased peratures of 40 °C and above.
Miele@home services. well as transferring it to the Miele Cloud. Tip: Set up Miele@home as described The tumble dryer automatically sets a in “Before using for the first time”.
Favourite programmes To enter a name To create a Favourite pro- gramme It is best to select short, memorable names. You can save your own customised Touch the letters or characters you programmes under names of your want. choice. ...
Drying assistant The Drying assistant helps you when A list of items will appear. drying a wide variety of items. The Textiles 11:02 tumble dryer will use the list of items to put together a suitable drying pro- ...
Timer The timer can be used to set the time Starting the timer you wish a programme to finish or start Touch the Start/Stop sensor. at. The programme start can be delayed by up to 24 hours. The time until the programme starts will appear in the display.
Timer Setting the timeframe SmartStart If you have activated the SmartGrid The SmartStart function lets you function in Settings, SmartStart or define a time period during which your SmartFinish will appear in the display tumble dryer will start automatically. instead of Start at or Finish at when The appliance will start on receipt of a you touch the ...
Changing the programme sequence Changing a programme once it Adding or removing laundry has started You have forgotten something but the programme is already running. You cannot change to another pro- gramme once a programme has started Touch the Add laundry sensor control.
Condensed water container To prevent water from running out, Emptying the condensed water keep it in a horizontal position when container carrying it. Hold the condensed water The condensed water is collected in container by the front panel and at the condensed water container.
Condensed water container Filling the condensed water container When certain programmes are being used, condensed water generated dur- ing drying is recycled and sprayed into the drum via a spray nozzle. The condensed water container must therefore be filled to at least the ―min―...
Fragrance flacon FragranceDos Removing the protective seal from the fragrance flacon Fragrance flacons (optional accessor- ies) can be used to give your laundry a Only hold the fragrance flacon as il- pleasant scent. lustrated. Do not hold it at an angle or tip it, as the fragrance will leak out This dryer has 2 places for inserting of it.
Fragrance flacon Inserting the fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper fluff filter. They can be fitted on the left and the right hand side next the opener. Insert the fragrance flacon into the socket as far as it will go.
Fragrance flacon grance will also be noticeable in the room air during the process. The Cool Air programme will not generally apply fragrance. Closing the fragrance flacon After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly.
- Always store in a cool, dry place Fragrance flacons are available to or- away from direct sunlight. der from Miele or online at www.miele- - When purchasing new fragrance flac- shop.com. ons, only remove the protective seal...
Cleaning and care Removing visible fluff Fluff filters Tip: You can also use a vacuum cleaner This tumble dryer has 2 fluff filters in the so that you can remove the fluff without loading area of the door. Both fluff fil- touching it.
Cleaning and care Remove the fluff from the filter sur- Turn the yellow dial on the lower fluff face of all the fluff filters and the per- filter in the direction of the arrow (until forated laundry deflector. it reaches the stop position).
Cleaning and care Cleaning the fluff filters with water Wipe the smooth plastic surfaces of the fluff filters with a damp cloth to clean them. Flush the filters through under warm running water. Shake the fluff filters thoroughly and then dry them carefully.
Cleaning and care Cleaning the plinth filter Clean the plinth filter when the pro- gramme running time is longer than usual or if the following message lights up in the display: Clean the fluff and plinth filters. See the operating instruction manual for more information.
Cleaning and care Cleaning the plinth filter Fit the plinth filter back on the handle. Make sure it is the correct way round. Pull the handle out of the plinth filter. Clean the plinth filter thoroughly un- der running water.
Cleaning and care Cleaning the plinth filter access panel Cleaning the dryer Disconnect the tumble dryer from the electrical supply. Damage due to the use of un- suitable care products. Unsuitable care products could dam- age plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all-pur- pose cleaners.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it.
Page 68
Fault F. If restart Switch the tumble dryer off and then on again. fails, call Service. Start a programme. If the programme is cancelled again with the same fault message, then there is a fault. Contact the Miele Customer Service Department.
Problem solving guide Messages in the display Message Cause and remedy Access via a code has been activated. Enter the code and confirm the entry. Deactivate the code if you do not wish this message to ap- pear in the display the next time the appliance is switched on.
Problem solving guide Unsatisfactory drying results Problem Cause and remedy The DryCare 40 Extra is The room where the tumble dryer is located is too not drying the laundry warm. This has caused the DryCare process to finish sufficiently. prematurely. Ventilate the room thoroughly. ...
Problem solving guide The drying cycle duration is very long Problem Cause and remedy The drying process The room where the tumble dryer is located is too goes on too long or warm. even switches off.* Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the fil- ters.
Problem solving guide General problems with the tumble dryer Problem Cause and remedy You can hear buzzing or The compressor (heat pump) is operating. Or you humming operating have selected a programme which sprays con- noises. densed water into the drum. ...
Page 73
The drum lighting is designed to last a long time and should not normally need to be replaced. If you have tried everything but the drum lighting still does not come on, contact the Miele Cus- tomer Service Department. The spray jet for spray-...
Problem solving guide Deformations Replacing the plinth filter The heat exchanger can clog up. Replace the plinth filter immediately if you see the following signs of wear before or after cleaning (optional ac- cessory). Poor fit Deformations indicate that the filter has become blocked and worn by continu- ous use.
Page 75
Problem solving guide Cracks, tears, indentations White residues or residues of other col- ours These residues arise from laundry fibres and traces of detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crust.
Problem solving guide Reactivating the plinth filter Checking the heat exchanger You can reactivate one or more soiled Risk of injury from sharp cooling plinth filters in a washing machine. You fins. will then be able to use the plinth filter You could cut yourself.
Problem solving guide Cleaning the fluff filter in the condensed water container When certain programmes are being used, water is taken from the con- densed water container and sprayed into the drum. The spray jet can some- times stop working. The fluff filter in the condensed water container is clogged.
Page 78
Problem solving guide Open the tumble dryer door. Remove the spray jet (optional ac- cessory). Replace the spray jet. The spray jet is located in the top left of the door opening. You can only replace the spray jet us- ing a special tool.
Optional accessories In the event of any faults which you Optional accessories for this tumble cannot remedy yourself, please contact dryer are available from Miele or from your Miele dealer or the Miele Customer your Miele dealer. Service Department. You also can order these and many...
*INSTALLATION* Installation Front view a Mains connection cable e Plinth filter flap b Control panel f 4 height-adjustable feet c Condensed water container g Cooling air grille d Door h Drain hose for condensed water...
*INSTALLATION* Installation Rear view If the tumble dryer is being transpor- ted on its side, it must be tipped onto its left or right side. a Protruding lid for holding when mov- If the tumble dryer is being transpor- ing the appliance ted upright and you are using a hand b Drain hose for condensed water...
*INSTALLATION* Installation Downtime after installation Installation Damage to the tumble dryer by Levelling the tumble dryer switching it on too soon. Ensure that no closeable door, slid- This can damage the heat pump. ing door or oppositely hinged door is After setting up the tumble dryer wait installed that could hinder opening of for at least one hour before switching...
Optional accessories – Washer-dryer stack The tumble dryer can be combined with a Miele washing machine in a washer- dryer stack. The appropriate Miele washer-dryer stacking kit is required. – Plinth The tumble dryer can be fitted on a...
*INSTALLATION* Installation Installation conditions requiring a External condensed water out- non-return valve Danger of condensed water Note back-flow. When drying is in progress, con- Water could flow back into the densed water is pumped into the con- tumble dryer or be drawn into it. densed water container through the Back-flow water could damage the drain hose which is located at the...
*INSTALLATION* Installation Arranging the drain hose Examples Drainage into a sink or floor gully Damage to the drain hose through incorrect handling. Use the hose holder to secure the drain hose. The drain hose can suffer damage and leak. Do not pull on the drain hose and do not stretch it or allow it to become kinked.
Page 86
*INSTALLATION* Installation Fit adapter 1 to the sink drain outlet Direct connection to a sink drain outlet using nut 2. Use the hose holder, the adapter, the The nut is usually fitted with a washer hose clips and the non-return valve which must be removed.
*INSTALLATION* Installation Hold the door securely and pull it for- Changing the door hinging wards: to remove the door you will You can change the door hinging on need to pull the base plate of the this tumble dryer yourself. hinge with its 2 pins out of the dryer.
Page 88
*INSTALLATION* Installation Turn the door lock through 180°. Use a T20 Torx screwdriver to remove screw on the lock catch. Press the door lock into openings on the opposite side of the door Pull off the lock catch together with opening.
Page 89
*INSTALLATION* Installation 4. Dismantle the door hinge from the door The door hinge cover must be un- clipped from position and then re- moved. Insert the lock catch into the new cover supplied with the dryer. Place this new cover to one side for now.
Page 90
*INSTALLATION* Installation 5. Change over the door hinge on the Tip: In some circumstances, the rods door can be difficult to dislodge. Moving the screwdriver with a levering action while The door hinge is secured to the door pulling at the same time may help to with 2 angled rods.
Page 91
*INSTALLATION* Installation 6. Change the lock catch on the door You now need the new door hinge cover supplied with the tumble dryer. You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch.
*INSTALLATION* Installation Refitting Now that you have changed the door hinging the door will open from 7. Refit the door the opposite side. Press the rubber seal back into the grove on the door. Push the orange marker round to the other side so that you will see at ...
Miele product must also be maintained in isolated operation or in operation that The electrical system must comply with is not synchronised with the mains...
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Suitable for pushing under a worktop Suitable for stacking Weight approx. 62 kg Drum volume 120 litres Load size 9.0 kg (weight of dry laundry) Capacity of condensed water container 4.8 l Hose length 1.49 m Maximum delivery head...
Technical data Data sheet for household tumble driers In acc. with delegated regulation (EU) No. 392/2012 MIELE Model name/identifier TWV 780 WP 9,0 kg Rated capacity Type of tumble drier (Air-vented / condenser) - / ● Energy efficiency class A+++ (most efficient) to D (least efficient)
Page 96
Technical data If the household tumble drier is equipped with a power management system. This programme is suitable for drying normal wet cotton laundry and is the most efficient programme in terms of energy consumption for cotton. If the household tumble drier is a condenser tumble drier. For the standard cotton programme at full load.
UK Conformity declaration Miele hereby declares that this heat-pump tumble dryer complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk...
Settings Changing a setting You can alter the tumble dryer's elec- tronics to suit changing requirements Change the value displayed and con- with the settings. firm with The settings can be altered at any time. Touch an option to select it. Accessing the Settings menu An option which is selected will be ...
The factory default PIN code is 250. - Change You can enter a PIN code of your own. If you forget the PIN code, only Miele Service can unlock the tumble dryer. Make a note of your new PIN code. - Deactivate For using the dryer without entering the code.
Settings Memory Display brightness The dryer saves the settings that were The brightness of the display can be selected last for a drying programme altered. (drying stage and/or extra option, or It can be set to one of 7 different set- the duration for some programmes).
Settings “Display” off status To save energy the display and sensor controls will go out after 10 minutes and the Start/Stop button will flash slowly. You can change this setting. Options - On The display will go out (after 10 minutes): – if a programme is not selected after the dryer has been switched –...
This function can be used for starting Once the Miele@mobile app has been your tumble dryer automatically at a installed on your mobile device, you time when your energy costs are most can check the status of your tumble economical.
“Start later”, the prompt to you can continue to use your tumble run the RemoteUpdate will be displayed dryer in the usual way. However, Miele again the next time you switch on your recommends installing RemoteUpdates. tumble dryer.
Settings Programme sequence Anti-crease The Anti-crease function reduces creasing after the end of the pro- gramme. The drum will continue to rotate for up to 2 hours after the drying cycle has fin- ished. This helps to reduce creasing. Options - Off - 1 h - 2 h (factory default) Cooling down temp.
Settings Conductivity Machine parameters This setting is only relevant for regions Airways indicator with very soft water. Fluff should be removed after drying. Very soft water can result in unsatis- In addition, this indicator will remind factory drying results. you to clean the filters when a certain amount of fluff has collected in them: You should only select this setting if ...
Miele uses their own and third party tected by copyright. The copyrights software which is not subject to any so- held by Miele and third parties must be called Open Source Licence for the op- respected. eration and control of the appliance.
Page 111
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Ireland South Africa Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele (Pty) Ltd. ACN 005 635 398 2024 Bianconi Avenue...