Table of Contents TABLE OF CONTENTS ASSEMBLING AND TROUBLESHOOTING PREPARING Unpacking PRODUCT SPECIFICATION Parts and buttons Preset Mode Lifting and moving the Monitor Power Indicator Setting Up the Monitor set - Attaching the Stand Base PROPER POSTURE - Detaching the stand base - Detaching the stand body Proper posture for using the monitor - Mounting on a table...
Adaptor 15-pin D-SUB Signal Cable Stand Base CAUTION Only use an approved LG power adapter. Damage caused by other power adapters is not covered by warranty. NOTE Note that the components may look different from those shown here. Without prior notice, all information and specifications in this manual are subject to change to improve the performance of the product.
ASSEMBLING AND PREPARING Parts and buttons Input Connectors (See p.14 ) Power Indicator LED On : Power is on LED Off: Power is off (Power Button) MENU CLOUD AUTO INPUT EXIT Front Side Buttons Input Connectors (See p.12 to 14)
ASSEMBLING AND PREPARING Lifting and moving the Setting Up the Monitor set Monitor Attaching the Stand Base Please heed the following information when moving the monitor. Place the monitor's screen face down. CAUTION CAUTION To protect the screen from scratches, Avoid touching the screen at all times, as this cover the surface with a soft cloth.
ASSEMBLING AND PREPARING Detaching the stand base Detaching the stand body Place the monitor's screen face down. Place the monitor's screen face down. To protect the screen from scratches, cover the To protect the screen from scratches, cover the surface with a soft cloth. surface with a soft cloth.
ASSEMBLING AND PREPARING Mounting on a table Adjusting the stand height Lift the monitor and place it on the table in an Place the monitor mounted on the stand base upright position. in an upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation.
ASSEMBLING AND PREPARING Adjusting the angle Using the Kensington locking device Place the monitor mounted on the stand base The connector for the Kensington lock is located in an upright position. on the rear of the monitor. For more information on installation and usage, Adjust the angle of the screen.
ASSEMBLING AND PREPARING Swivel stand Be careful with the cables when rotating the screen. Image shown may differ from your Monitor set. Swivel 356 degrees and adjust the angle of the Monitor set to suit your view. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise.
Mounting on a wall This monitor has a VESA compatible mount on the Install the monitor at least 10 cm away from the back. Most mounts will require an LG mounting wall and leave about 10 cm of space at each side plate.
Page 11
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Please use a LG wall mounting bracket when using a VESA mount. For more information, contact your local retail store or a qualified installer.
USING THE MONITOR SET USING THE MONITOR SET Self Image Adjustment Connecting Input Signal Cable Press the power button on the front to turn on This monitor supports the *Plug and Play the monitor. When powered on, the "Self Image feature.
USING THE MONITOR SET Connecting LAN/Peripherals DVI connection Transfers video signals to another monitor. Con- LAN connection nect the monitor using the DVI cable as illustrated below. Connect the router or switch to the monitor using a LAN cable as illustrated below. DVI-I(D) IN MONITOR CAUTION...
USING THE MONITOR SET Peripheral device connection NOTE Connect peripheral devices to the monitor using Peripheral devices are sold separately. USB, microphone and headphone ports. The USB ports on the left and bottom of the monitor can be used to connect the key- board, mouse, and other USB devices.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing The Main Menus Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. Press to select the desired menu item. To change the settings of the selected item press the buttons on the front of the monitor. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS Customizing Settings Menu Settings Press MENU button on the bottom of the Monitor set to display the MENU OSD. Set the options by pressing the ◄ or ► or ▼ buttons. Select the "NEXT MENU" button to enter the more option settings.
Page 17
CUSTOMIZING SETTINGS PICTURE Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Enter to PICTURE by pressing the ▼ button. Set the options by pressing the ◄ or ► or ▼ buttons.
Page 18
CUSTOMIZING SETTINGS COLOR Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select COLOR by pressing the ► button. Enter to COLOR by pressing the ▼ button. Set the options by pressing the ◄...
Page 19
CUSTOMIZING SETTINGS DISPLAY Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select DISPLAY by pressing the ► button. Enter to DISPLAY by pressing the ▼ button. Set the options by pressing the ◄...
Page 20
CUSTOMIZING SETTINGS OTHERS Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more option settings. Select OTHERS by pressing the ► button. Enter to OTHERS by pressing the ▼ button. Set the options by pressing the ◄...
CUSTOMIZING SETTINGS Volume (Only supported in CLOUD) Press any button on the front of the monitor to dis- play the MONITOR SETUP OSD menu. Press the MENU button to display the options in the VOLUME OSD menu. Set the options by pressing the buttons on the front of the monitor.
Troubleshooting TROUBLESHOOTING Nothing is displayed on the screen Is the monitor's power cord plugged in? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator. y Adjust the brightness and the contrast. Is the power indicator displaying as white? y If the monitor is in power saving mode, move the mouse or press any...
Page 23
Troubleshooting The image is displayed abnormally. Does the display area appear un- Pressing the AUTO button will automatically optimize the screen to the current centered? display mode. Does the screen exhibit vertical Pressing the AUTO button will automatically optimize the screen to the current lines? display mode.
Specifications PRODUCT SPECIFICATION LCD Screen Type 481.33 cm (18.95 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 481.33 cm Pixel Pitch 0.2835 mm x 0.2835 mm Resolution Maximum Resolution 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz DVI-I output 1920 x 1200 @ 60 Hz...
Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every hour.
Using CITRIX Solution USING CITRIX SOLUTION Login screen Power Button This screen is displayed when power is turned on. Click the Power button to turn the system off or restart it in the login screen. Login Window Enter a user name, password and domain to ac- cess the VDI server.
Page 28
Using CITRIX Solution Restart Menu Language Select the Restart menu and click the OK button in Set a language to use on the network monitor the Restart pop-up to restart the system. home screen. After setting the language, click the 'OK' button.
Page 29
Using CITRIX Solution Wired connection setting Wireless setting Ethernet speed setting: Set the network The AP list for wireless network connection is speed. displayed. Click the Refresh button to update You can select Auto-Detect, 10Mbps, the list of accessible APs. 100Mbps or 1000Mbps.
Page 30
Using CITRIX Solution Server Set Citrix VDI server and LGDMS server address. LGDMS is a network monitor management soft- ware provided by LG Electronics. VDI server setting Enter a VDI server address to access. Connect Automatically: ? DHCP setting: Set the DHCP mode. If it is set to On, an IP is automatically fetched from a DHCP server and used.
Page 31
Using CITRIX Solution Screen Output Setting LGDMS setting Enter the address of LGDMS server to con- Primary display setting nect to. Resolution: Select the resolution of a moni- tor. The network monitor supports 5 resolutions including Auto, 1920x1080, 1680x1050, 1280,x1024 and 1024x769. When it is set to Auto, the monitor is auto- matically adjusted to the optimal resolution.
Page 32
Using CITRIX Solution Secondary display setting Volume Resolution: Select the resolution of a moni- You can adjust the system volume and mike vol- tor. ume. If you select the Mute checkbox, the volume Among the resolutions supported in the DVI control bar is disabled.
Page 33
Using CITRIX Solution Information button Factory reset The system is reset to factory defaults and reboot- General Tab ed. All user settings are removed. Display the hardware and software information of a network monitor. Hardware Information: Network monitor mod- el name, serial number and asset number. The asset number can be set in LGDMC Software information: Firmware version, soft- ware file name and publisher information...
Page 34
Using CITRIX Solution Network Tab Ping Tab Display network related information. By pinging, you check the network connection to a specific IP or host from a local client and also local Network Information: VDI/LGMS server IP network status. address information Wired Connection: IP address and MAC ad- NOTE dress of a wired network...
Page 35
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET.