Page 1
Operating and installation instructions Built-in coffee machine To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-SA M.-Nr. 11 860 001...
Use household waste. material-specific collection points for valuable materials and take advantage of return options. Your Miele dealer will take the packaging material away. Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice.
Guide to the machine ..................14 Controls and indicators ..................16 Operation......................18 Symbols in the display ..................20 Miele@home....................... 21 Before using for the first time ................22 Before using for the first time ................22 Switching on for the first time ................22 Filling the coffee bean container ..............
Page 5
Contents Cleaning and care ..................... 49 Overview of cleaning intervals................49 Cleaning by hand or in the dishwasher ............... 50 Unsuitable cleaning agents ................. 51 Cleaning the drip tray and waste container............52 Cleaning the drip tray cover ................54 Cleaning the water container ................
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating instructions in a safe place and pass them...
Page 7
Warning and Safety instructions Correct application This coffee machine is intended for home use. This coffee machine is not intended for outdoor use. This coffee machine must not be used at altitudes above 2000 m. It must only be used as a domestic appliance to make espresso, cappuccino, latte macchiato, tea etc.
Page 8
Keep packaging material away from children. Technical safety Installation work or repairs should only be carried out by a Miele authorised technician. Unauthorised or incorrect installation work or repairs can pose considerable danger to users. ...
Page 9
The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation.
Page 10
The coffee machine must be disconnected from the electricity supply during repair work. While the machine is under warranty, repairs should only be undertaken by a Miele authorised technician. Otherwise the warranty is invalidated. Never open the outer casing of the machine. Tampering with...
Page 11
Warning and Safety instructions Danger of injury to the eyes. Never look directly at the lighting or use optical instruments to look at it. Please note the following regarding water: - The water quality must conform to the requirements for drinking water in the country in which the coffee machine is being used.
Page 12
Descale the coffee machine regularly depending on the water hardness level in your area. Descale the machine more frequently in areas with very hard water. Miele cannot be held liable for damage arising from insufficient descaling, the use of incorrect descaling agent or the use of descaling agent which is not of the appropriate concentration.
Page 13
Warning and Safety instructions For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the stainless steel surfaces. These will damage the stainless steel surfaces, causing them to lose their dirt- repellent protective coating.
Guide to the machine Exterior view a On/Off button b Control panel c Door handle d Height-adjustable central spout with lighting e Drip tray cover f Milk flask...
Page 15
Guide to the machine Interior view a Bean container b Milk valve c Height-adjustable central spout with lighting d Grinder setting e Bean container f Fan outlet g Water container h Drip tray with lid i Brew unit j Waste container k Maintenance container l Drip tray...
For creating and managing profiles aromatic coffee by using twice as Maintenance sensor much ground coffee but the same Maintenance programmes, e.g. amount of water Descale m Optical interface sensor Parameters (For your Miele dealer only) For displaying or changing drink settings...
(see “Settings – To select a menu, touch the relevant Volume”). sensor, e.g. the sensor. Drinks menu 12:00 Miele When the following appears in the Settings display, you are in the drinks menu: Select drink Ristretto...
Page 19
Operation Name B C D E - To enter a character, highlight the one you want and confirm your choice with OK. - To delete a character, touch the sensor control. - To save the name, select the tick and confirm with OK.
(This symbol is also found on the water container: fill up to this mark with water). If Miele@home has been activated for the coffee machine, these symbols represent the quality/status of the WiFi connection, indicating the strength in increments from ...
The ability to use the Miele app - The Miele app depends on the availability of the - A Miele user account. You can create Miele@home service in your country. a user account via the Miele app. The Miele@home service is not The Miele app will guide you through available in every country.
You might also be asked for your connected to a WiFi network and is location. signed into the Miele app, the time will be synchronised based on the location The choice of location determines how setting in the Miele app.
Page 23
Before using for the first time Selecting the Performance mode You can select the appropriate mode to suit your personal preferences (see “Settings – Performance mode”). - Eco mode: This is an energy-saving mode. - Barista mode: This mode has been optimised for unadulterated coffee enjoyment.
Filling the coffee bean container Fill the coffee bean container with Tip: You can use a nut or seed grinder roasted coffee or espresso beans if you to grind green coffee beans. These want to use freshly ground coffee beans types of grinder generally have a for each cup of espresso or coffee.
Page 25
Filling the coffee bean container Take the lids off the bean containers and fill them with coffee beans. Put the lids back on the bean containers to seal them. Slide the bean container drawers all the way into the coffee machine. Close the appliance door.
Filling the water container Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day.
Switching on and off Switching the coffee machine Switching the coffee machine Touch the On/Off button . Touch the On/Off button . The coffee machine heats up and rinses If coffee has been dispensed, the coffee the pipework. Hot water will run out of machine will rinse the coffee pipework the central spout.
Spout adjustment The central spout cannot be manually adjusted. Before making the drink, the central spout moves down and the cup sensor stops it at the optimum height for the cups or glasses being used. When the coffee machine is switched off, the central spout will be in the middle position.
Making drinks - Cappuccino consists of approx. Danger of burning and scalding 2 thirds milk froth and 1 third on the dispensing spouts. espresso. The liquids and steam dispensed are - Latte macchiato consists of 1 third very hot and can cause scalding. each of hot milk, milk froth and Keep well away from the area espresso.
Making drinks The milk flask Milk preparation Milk is not cooled in the milk flask. Milk or milk alternatives (e.g. soya For high-quality milk froth, always milk) containing added sugar can use cold milk (< 10 °C). clog up the milk pipe and the rest of the milk pipework.
Making drinks Making a coffee Place a cup under the central spout. Push the milk flask back into the Touch the sensor for the drink you coffee machine until it clicks into want. place. The drink will be dispensed from the Tip: It is easier to remove the milk flask central spout into the cup.
Making drinks Making a DoubleShot of coffee Tip: Make sure that the bean and water containers have enough beans and Press the sensor control water inside them before starting the immediately before or after you start Coffee pot function. making a drink.
The tea The respective dispensing temperatures leaves are either roasted or steamed are the ones that Miele recommends for depending on the region. Green tea making the types of tea concerned. can be infused multiple times.
Making drinks Select the setting you want and Follow the instructions for making confirm with OK. tea on the tea packaging. Making tea The amount of tea required varies from Touch the sensor to access the one type of tea to another. Always menu containing the various types of follow the recommendations of the tea.
Making drinks Remove the tea filter or tea bag when Dispensing warm or hot water the desired brewing time has You can choose between the following elapsed. options: Teapot - Hot water at approx. 90 °C Teapot function allows you to make - Warm water at approx. 65 °C a large quantity of tea (maximum The drinks menu is displayed.
Expert mode Expert mode function allows you to change the portion size while the drink is being made. The setting will not be Dispensing saved and will only apply for the current drink. Switching Expert mode on and Move the indicator (small triangle) across the navigation area according The drinks menu is displayed.
Grinder setting The grinder setting determines the contact time between the ground coffee and the water, known as the extraction time. When the ideal grinder setting is selected, the machine dispenses a perfect cup of coffee with a fine, hazelnut-brown crema. The grinder setting you select will be used for all coffee drinks.
Parameters For coffee drinks that use milk, you can Displaying and changing not only set the amount of espresso or parameters coffee but also the amount of milk or You can change the portion size for all milk froth to be dispensed with these drinks.
Parameters Tip: For the drinks pictured on the Pre-brewing the ground coffee control panel, you can change the When the pre-brewing function is portion size by pressing and holding the turned on, the ground coffee is first button down while the drink is being moistened with a little hot water.
Profiles In addition to the Miele drinks menu You can now change the drinks (Miele profile), you can create individual individually. profiles to cater for different tastes and Making drinks stored in a preferences. profile Within the profile, you can adjust the ...
Select the option you want and confirm with OK. Changing the name This option can only be selected if a profile has been allocated in addition to the Miele standard profile. Select Change name and confirm with OK. Change the name as required: - To delete a character, touch the sensor.
MobileStart With MobileStart you can, for example, If you are making a drink with start making a drink via the Miele app. MobileStart, you will be notified of drink dispensing with acoustic and You will only be able to use optical signals.
If the coffee machine has been to display or change. connected to a WiFi network and is signed into the Miele app, the time will Confirm with OK. be synchronised based on the location Change the setting as required and setting in the Miele app.
Settings machine from switching itself on The welcome melody that plays when unnecessarily, for example, whilst you you touch the On/Off button can be are away on holiday. switched on or off. The programmed times will, however, Display brightness remain in the memory and will be reactivated when the machine is next You can set the display brightness switched back on manually.
Settings Eco mode - Cleaning status messages or cleaning prompts are suppressed Eco mode is an energy-saving mode. and delayed until the machine is next The system does not heat up until switched on. someone starts making a drink. - The Switch off at Switch off after Barista mode...
Settings Water hardness Calcium Setting Water hardness Calcium Setting content content °dH mmol/l °dH mmol/l mg/l Ca mg/l Ca ppm (mg Ca ppm (mg Ca 37–45 6.6–8.0 258–321 37–45 46–60 8.2–10.7 322–429 46–60 61–70 10.9– 430–500 61–70 12.5 Tip: If your water hardness is >21 °dH (3.8 mmol/l), we recommend using bottled drinking water instead (< 150 mg/l Ca...
The following options may appear You can change the coffee machine under Miele@home: settings, for example, in the Miele app - Set up: This option only appears if when remote control is switched on. To the coffee machine has never been...
- Profiles and the associated drinks installed. - Miele@home - Some software updates can only be carried out by your Miele dealer. Software version The “Software version” menu option is intended for the your Miele dealer. You do not need this information for domestic use.
Cleaning and care Risk to health due to inadequate cleaning Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly. Overview of cleaning intervals Recommended frequency What do I have to clean/maintain?
Cleaning and care Cleaning by hand or in the Risk of damage as a result of dishwasher excessively high dishwasher temperatures. The brew unit is not dishwasher Components may be ruined (e.g. safe. may become warped) if washed in a Clean the brew unit by hand only dishwasher at temperatures higher under warm running water.
Cleaning and care Unsuitable cleaning agents Danger of burning and scalding on hot components or by hot liquids. Contact with unsuitable cleaning Components can become very hot agents can alter or discolour the during operation. Touching hot external surfaces. All surfaces are components can cause burning.
Cleaning and care Cleaning the drip tray and waste container Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding.
Page 53
Cleaning and care Clean the drip tray, lid and waste Reassembling the drip tray container in the dishwasher or wash them by hand using warm water and a little washing-up liquid. Dry all parts thoroughly. Clean the inside of the coffee machine underneath where the drip tray goes.
Cleaning and care Cleaning the drip tray cover Clean and dry the surface that the Remove the drip tray cover as water container sits on. follows: apply pressure to the rear edge so that the cover tips forwards ...
Page 55
Cleaning and care Detach the milk pipework from the Grip the dispensing unit by the sides dispensing unit as follows: pull the and pull it down to remove it. tab to the left. Take the dispensing unit apart, Do not remove the milk pipework separating it into 3 components: the connecting piece.
Cleaning and care Refit the stainless steel cover. Close the appliance door. Fit cover to central spout will appear in the display. Confirm the message with OK. Cleaning the cup rim sensor The cup rim sensor is located under the central spout.
Cleaning and care Cleaning the milk flask with lid The milk flask should be taken apart and cleaned every day after use. Both the lid and the glass flask can be cleaned in the dishwasher, or by hand using warm water and a little washing- up liquid.
Cleaning and care Open the appliance door. Clean the milk valve with a damp cloth/microfibre cloth. Close the appliance door. Removing and cleaning the milk valve (once a month) If the following issues occur during milk preparation, the milk valve may be blocked: only hot milk is dispensed instead of milk froth, the milk sprays ...
Page 59
Cleaning and care Press the latches on the left and Pull the stainless steel bolt upwards right-hand sides of the milk valve and out. holder and pull the holder forwards to Clean the individual components of remove it. the milk valve in the dishwasher.
Page 60
Cleaning and care Connect together the angular Tip: If necessary, turn the milk moulded hose and longer milk pipework towards the back at the pipework. Start by attaching the connecting piece on the right-hand moulded hose to the top of the side.
Cleaning and care Cleaning the bean containers Risk of damage from incorrect use and cleaning. Immersing the bean containers in liquids can result in malfunctions. If they are taken apart, bits may break off or the mechanism may no longer work properly once they are reassembled.
Cleaning and care Removing the brew unit and cleaning it by hand The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit. Only clean the brew unit by hand with warm water. Do not use any cleaning agents.
Page 63
Cleaning and care Replacing the brew unit Proceed in the reverse order: push the brew unit back into the coffee machine. Tilt the brew unit forward a little when doing this. Wipe any coffee grounds from the filters. One filter is located in the funnel.
Remove the following parts from the microfibre cloth. After cleaning, wipe interior: the surfaces dry using a soft cloth. - Water container Tip: You can also use a Miele microfibre - Drip tray cloth to clean the front. - Maintenance container - Brew unit...
Cleaning and care Maintenance programmes Rinse the milk pipework The coffee machine has maintenance If you have made a drink with milk, the programmes for: coffee machine will rinse the milk pipework automatically after a few - Rinsing the machine minutes.
Page 66
The This has been specially developed for process has to be completed use with Miele coffee machines and through to the end. prevents subsequent damage. The maintenance programme lasts for The milk pipework cleaning agent can approx.
We recommend using Miele cleaning tablets to clean the brew unit. These have been specially developed for use with Miele coffee machines and prevent subsequent damage. Miele cleaning tablets can be ordered from your Miele dealer.
Page 68
Cleaning and care Cleaning the brew unit and interior The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit. Only clean the brew unit by hand with warm water. Do not use any cleaning agents. To ensure good tasting coffee and to prevent the formation of microbes in the machine, remove and clean the...
Page 69
Cleaning and care Dropping a cleaning tablet into the brew unit Wipe any coffee grounds from the filters. One filter is located in the funnel and the other to the left of the Drop a cleaning tablet into the top of funnel.
Descaling must be carried out. The These have been specially developed process takes approx. 35 minutes. for use with Miele coffee machines and prevent subsequent damage. The coffee machine will give you plenty of warning when it needs to be Other descaling agents, which descaled.
Page 71
Cleaning and care Add 2 descaling tablets to the water container. Fill the water container to the mark with lukewarm water. Follow the instructions for the mixing ratio carefully. Fill the water container with the specified amount of water. Otherwise, descaling will be incomplete.
Error messages must be confirmed with „OK“, otherwise the message can reappear in the display even though the problem has been remedied. Follow the instructions which appear in the display to troubleshoot an issue. If after this, the error message appears in the display again, contact your Miele dealer. Issue...
Page 73
Problem solving guide Issue Cause and remedy F73 or The brew unit cannot be positioned correctly or is soiled. It is not possible to press the ground coffee. Check the brew unit Check whether you can remove the brew unit. ...
Page 74
Problem solving guide Issue Cause and remedy F233 The cup rim sensor is not inserted or is incorrectly inserted. If the central spout is moving upwards and the cup rim sensor is bumped, e.g. with a cup, the cup rim sensor loses its reference position.
Switch the coffee machine off at the wall socket and unplug it. Contact a qualified electrician or your Miele dealer. The lighting remains off The lighting has been switched off. after the coffee ...
Page 76
Problem solving guide Issue Cause and remedy A fan can be heard even This is not a fault. though no drinks are Once a drink has been dispensed or the machine being prepared or the has been switched off, the internal fan will continue coffee machine is to run until the interior is sufficiently dehumidified.
Page 77
Problem solving guide Issue Cause and remedy Drink dispensing is This is not a fault. prematurely aborted If the container has a very wide opening that even though there is a prevents the cup rim sensor from making contact container under the with the edge of the container (e.g.
Fill the container with fresh beans. There may be stones in amongst the coffee beans. Switch the coffee machine off immediately. Call your Miele dealer. The coffee flows too The coffee is too coarsely ground. quickly into the cup.
Page 79
Problem solving guide Issue Cause and remedy The coffee tastes weak. Less coffee is being brewed because insufficient The coffee grounds in coffee beans are getting into the grinder. the waste container are Have you used a dark roast? sludgy and grainy. This type of coffee bean is often more oily.
Miele dealer. please contact your Miele dealer. See end of this booklet for contact details. Contact details for your Miele dealer are given at the end of this document.
- CJ Jug 1.0 l Insulated flask for coffee or tea (pot function) - Miele Black Edition One for all Whole coffee beans – perfect for making espresso, café crema and speciality coffees with milk - Miele Black Edition Espresso Whole coffee beans –...
*INSTALLATION* Installation this Miele product must also be Electrical connection maintained in isolated operation or in The appliance is supplied with a mains operation that is not synchronised with cable with moulded plug for the mains power supply, or these connection.
A minimum installation height of 850 mm must be observed. All dimensions are given in mm. The machine can be combined with other Miele built-in appliances. In this case, there must be a full-width, closed shelf between them. If the machine is to be combined with a suitable built-in crockery/food-warming drawer, no shelf is required in between.
Page 84
*INSTALLATION* Installation Installation and connections All dimensions are given in mm. a Mains connection cable b No electrical connection in this area...
*INSTALLATION* Installation open the door wide enough to remove Building in the coffee machine the left-hand bean container (minimum Danger of injury due to incorrect door opening angle of 120°). operation. To install the machine, you will need a A machine that has not been built in TX 20 screwdriver.
*INSTALLATION* Installation Open the appliance door. The door opening limiters can be removed, allowing you to increase the opening angle to approx. 170°. This makes it easier to remove the bean containers, for example. Two TX20 (25 mm) screws are included with the coffee machine. ...