hit counter code

Refill Indicator; Dispensing Liquid Cleaning Agent; Filling The Door Dispenser - Miele PFD 401 Marine Operating Instructions Manual

Commercial dishwasher
Hide thumbs Also See for PFD 401 Marine:
Table of Contents

Advertisement

Cleaning agent and rinsing agent
Push the suction lance into the opening of
the container and secure the lid. Observe
the colour coding.
Feed the suction lance into the container
until it reaches the bottom.
Wipe up any spilled process chemical
thoroughly.

Refill indicator

When the fill level in the cleaning agent
canister is low, you are reminded to change
the canister.
Change cleaning
agent canister.
Empty status
Information
detected.
Confirm the prompt with OK and change
the cleaning agent canister.
Fill the dispensing path (see "Machine
functions")
Checking consumption
Check consumption regularly by checking
the fill levels in the supply containers and
replace containers in good time to avoid the
dispensing system being sucked completely
dry.

Dispensing liquid cleaning agent

The dispensing concentration is set by the
Miele Customer Service Department.
38

Filling the door dispenser

 Risk to health due to dust production.
When dispensing powder cleaning agents
and tablets, dust from fine cleaning
agents can be stirred up. If this dust gets
into the mouth, throat or eyes, it can
cause irritation or burns.
When dispensing powder cleaning agents
and tablets, avoid the production of dust
as much as possible.
Add powder cleaning agent or a tablet to
the powder cleaning agent dispenser before
every wash programme (except
Cold
Reactivation
,
on the
Super Short
OK
Press the yellow button on the dispenser
container with the  symbol.
The flap will spring open. The flap is always
open at the end of a programme run.
The level markers in the powder container
with the door in the horizontal position
indicate the fill level in millilitres (ml). The
max. capacity is approx. 60 ml of cleaning
agent.
The amount in ml equates to approx. the
amount normally recommended in grams (g)
for proprietary powder cleaning agents.
Powder density (grain size) can affect this
amount.
Super Short
Drain
and
). Follow the tips
programme.
,

Advertisement

Table of Contents
loading

Table of Contents