Warning And Safety Instructions - Miele PFD 401 Marine Operating Instructions Manual
Commercial dishwasher
Hide thumbs
Also See for PFD 401 Marine:
- Operating instructions manual (100 pages) ,
- Operating instructions manual (100 pages) ,
- Operating instructions manual (128 pages)
Table of Contents
Advertisement
Warning and Safety instructions
Correct installation
This dishwasher may only be installed and assembled on ships with a hull longer than
24 metres by qualified persons who will ensure that the requirements for the safe
installation of this dishwasher are met.
When installing the dishwasher, it must be securely fixed to the floor.
Failure to do this could result in personal injury, damage to the dishwasher and damage to
other objects and installations.
This dishwasher must be securely bolted to the floor using the floor anchoring kit
included.
Do not install this dishwasher in an area where there is a risk of explosion or freezing
conditions.
To ensure stability a built-under dishwasher must only be installed beneath a continuous
worktop that is bolted to the adjacent cabinetry.
In order to reduce the risk of damage from condensation, the furniture in the area
around the dishwasher should ideally be designed for commercial use.
Furniture can be protected using the vapour protection set, which is available as an
optional accessory.
The vapour barrier film should be stuck under the worktop in the area around the
dishwasher door.
Technical safety
This dishwasher must only be commissioned, repaired and maintained by the Miele
Customer Service Department, a dealer or a suitably qualified service technician.
Unauthorised installation, maintenance and repairs can cause considerable danger for the
user.
Before using the dishwasher, check it for any externally visible damage. Do not use a
damaged dishwasher. This could be dangerous.
In the event of a damaged or leaking dishwasher, switch off at the power supply
immediately and call the Miele Customer Service Department, a Miele dealer or a suitably
qualified service technician.
Faulty components must only be replaced by genuine Miele original spare parts. Only
when these parts are fitted can Miele guarantee the correct functioning and safety of the
appliance.
The electrical safety of this dishwasher can only be guaranteed when correctly earthed.
If in any doubt, please have the electrical installation tested by a qualified electrician.
Please follow the advice on installation in these operating instructions and the
installation plan.
Before connecting the appliance, ensure that the connection data on the data plate
(voltage, frequency and fuse rating) match the mains electrical supply.
There must be no electrical sockets behind the dishwasher. Danger of overheating and
fire risk if the dishwasher were to be pushed up against a plug. See "Electrical connection".
12
Advertisement
Table of Contents
