Dispensing systems
The following menu allows you to activate,
fill and rinse dispensing systems, to change
their names if required and to set the
dispensing concentration for all
programmes.
Depending on the model, various
dispensing systems are available for
dispensing process chemicals.
Cleaning agent and rinsing agent can be
dispensed either via a corresponding door
dispenser ( cleaning agent, rinsing
agent) or via suction lances for liquid media
from an external canister. It is not possible
to activate both systems at the same time.
Selecting a dispensing system
The menu is saved under the following input
path.
Further choices
Extended settings
Dispensing systems
Cleaning agent door
Clean. agent canister
Rinse aid door
Rinse aid canister
*) Depending on the model
Cleaning
agent door
Dispensing
Cleaning ag.
systems
canister
Only the available dispensing systems are
displayed.
Select a dispensing system.
Door dispenser
This selection is only available if the
corresponding dispensing system is
present (depending on the model).
One of the following messages is displayed
if you have selected
Information
- Door dispenser activated
Information
- Dispensing from the canister activated.
No further settings are possible. Confirm
the message by pressing
If you want to change dispensing to the
powder dispenser, select "Cleaning agent
door" and activate it, or select the
*)
agent canister
dispensing.
Further settings
Cleaning agent door
Cleaning agent door
"Cleaning agent door"
is active. No further
settings necessary.
"Cleaning agent
canister" activated.
OK
option and deactivate
.
OK
OK
.
Clean.
65